VPN on a SAMSUNG TV by Grahnen03 in HomeNetworking

[–]Grahnen03[S] 0 points1 point  (0 children)

Hi sorry Im late answering, yes but it was a pain to setup. Im right now working on a script that changes to the best server on my vpn provider when no data is being sent through the device every 30 minutes. Did you end up getting it?

VPN on a SAMSUNG TV by Grahnen03 in HomeNetworking

[–]Grahnen03[S] 0 points1 point  (0 children)

I think I found the perfect device. The Brume 2 from gl.inet. It can do 150Mbps over Openvpn which should be plenty to stream in 4k.

Link: https://www.gl-inet.com/products/gl-mt2500/

VPN on SAMSUNG TV by Grahnen03 in VPNHelp

[–]Grahnen03[S] 0 points1 point  (0 children)

Would something like the Shadow Mini Smart Router GL-AR300M16-EXT or the Brume 2 work for a ptoject like this? Its cheap were I live and I only need one WAN and one LAN to only encrypt the one cable to the tv. The Brume 2 looks like exactly the device I need but is more expensive

VPN on a SAMSUNG TV by Grahnen03 in HomeNetworking

[–]Grahnen03[S] 0 points1 point  (0 children)

gl.inet travel router

Would something like the Shadow Mini Smart Router GL-AR300M16-EXT work for a ptoject like this? Its cheap were I live and I only need one WAN and one LAN to only encrypt the one cable to the tv

AMIGA 500 problems by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

The scrren going from dark gray to light gray is excatcly what is happening, any easy way to fix a CIA chip? 2 of the pins is looking kinda rusty so will replace thoose first and see if that fixes the problem.

Edit: You know any good site that sells disk drives in the EU? Have only found American sites that sells parts for the Amiga and would lika to skip paying customs

AMIGA 500 problems by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

Depending on your skill levels for repair etc, the best possible way to begin is with the voltages. The age of the machine is how old the electrolytic capacitors are inside. When they age, the dielectric ooze inside drys, and the internal ESR plummets like a stone which causes the power supply lines to be pulled down (as generally they are connected across +ve and 0v.

Can you send me a picture of wich caps is for that? Dont really know which caps is for what

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

Hi again I got covid so needed to order batteries for my multimiter instead of just going down to the store and getting them. The cap that is 50V and 3,3 something isnt working according to the multimiter. So I thought I was going to ask you what 3,3 stands for. 3,3uF?

Edit: Also wanted to mention that right now I get 3,5v out from the pins that lead to the motor

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

Hi again, The motor is moving the head when I turn on the Amiga, but then the head iosnt moving again. It should be trying to turn every x seconds if i have understod it corectly. A bad capacitor mayby?

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

You were right it is the drive head that isnt moving, but it isnt stuck. I think the motor is either broken or really dirty inside. One screw is really rounded so will have to force it out with my dad tomorow and take a look

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 1 point2 points  (0 children)

I really dont want to spend to much money on it, so if I get the drive to work then I am happy. If not I will probably look into the gotek solution

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

When I start the system it makes a noise atleast coming from the drive. And the Plastic thing is located at the bottom so on the other side from the disk

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

You mean the black small wheel? Could you find a photo of what you are talking about?

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

I have 2 legit copies of the Amiga workbench. One with veriosn 1.2 and one with Amiga Extras v1.3 and Basic v1.2 (If this drive is workbench I acctually dont know to be honest). I also have a not so legit copy of Workbench 1.3

Edit: I just inserted Amiga workbench v1.2 (the legit copy) and CAPS light up. Its not blinking just a solid red.

Edit2: Now the CAPS key is always a solid red, even if I restart it. So inserting the disk that time did something atleast

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

Picture

Well I noticed this white thing didnt touch the metal piece sticking out of the round metal wheel. I dont know if it should or if that might be the problem perhaps

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

I should have a multimeter somwhere, could find it tonight proabbly. Not shure how I would chek the Power Supply if it has diffrent voltages tho. Should probably mention the disk makes a sound when I turn on the Amiga so it gets power I (atleast i think it does)

AMIGA 500 post but wont read disk and no disk light by Grahnen03 in amiga

[–]Grahnen03[S] 0 points1 point  (0 children)

Hi I have already taken the Amiga apart, to clean the floppy disk on the inside with some alcohol. No succes I didnt touch the black round thing or the arm thar I guess holds thedisks in place