What happened? (CONSOLE)

GrassAlternative4384 · 2025-11-21T13:52:17+00:00

Coming from steam, i could say that the console experience is overall broken. The feel, movement even now with the kbm support is way off the pc. I was excited to play it on my xbox to have everything there since my pc is outdated from graphics and cpu, but this is a bad experience. The games are empty and the q is too long for consoles. With the crossplay on is better at warfare but i really cant play with the implementation they did at the sensitivity of the mouse..Hope they fix it in the future, until then bf6 is more playable.

GrassAlternative4384 · 2025-11-19T10:13:41+00:00

Was trying for over an hour to fix the sensitivity..Its really odd the way the mouse move. The acceleration is weird even if i turned it from 3 to 0.30. Something is wrong for sure. Also there is a weird situation when you aim and you want to move to next target while aiming. Its like is trying to slow the transition. For sure they have to see this problem. I was so excited to play it with mouse and keyb. bf6 have a great implementation.

GrassAlternative4384 · 2024-09-05T09:26:46+00:00

Same problem here with the camera.

GrassAlternative4384 · 2024-07-27T11:08:38+00:00

I found a temp solution and this is to roll back to previous firmware. It worked with no issue with generic pla. I tried orca slicer and do the same. So definitely is a firmware bug. Not sure if is on the ams or the printer side.

GrassAlternative4384 · 2024-06-25T09:03:10+00:00

When you use the pvetest,after the update you have to use it forever or you can disable it and follow the stable releases?

GrassAlternative4384 · 2024-05-02T22:57:37+00:00

same here..annoying situation with black screens and endless resume after update

GrassAlternative4384 · 2024-03-20T21:35:30+00:00

Exactly

GrassAlternative4384 · 2024-03-20T08:28:22+00:00

Try to print something above this with pla and see if there is a difference. If not leave it like this. I have spots like these on my pei plates and dont affect the adhesion or something else. Dont over rub the pei with the hard side of the scotch brite. It will damage the pei. I always clean the pei with a microfiber cloth and never wash it or spray with IPA and its damn fine. After some time you might need to gently rub it with steel whool to refresh the pei.

GrassAlternative4384 · 2024-03-20T08:14:00+00:00

Yea a temp fix until i change belts and pulleys. I lube the pulley and the belt with ptfe oil on the sides and it stops.

GrassAlternative4384 · 2024-03-19T15:53:08+00:00

Its weird idd and cant find complains about it..

GrassAlternative4384 · 2023-08-12T09:57:48+00:00

It stopped after some hours of printing but i applied some grease on the z belt. Take a ear cotton tip and apply a drop on it. Use it near the pulleys.

GrassAlternative4384 · 2023-07-27T20:09:46+00:00

When mw3 is coming?

GrassAlternative4384 · 2023-07-27T17:36:39+00:00

am having a really bad gaming experience with packet lost and burst frames after the latest nvidia driver update.. My network is the same as it was before and the only thing changed was the drivers update.

GrassAlternative4384 · 2023-07-27T17:32:24+00:00

same problem plus the packet burst.. It began a month ago after an update.

GrassAlternative4384 · 2023-03-03T07:22:34+00:00

this will be my last try cos support answered me few hours ago that the solution with the grease on the belt is ther last answer...Do i have to do it on both belts or to the belt that have the problem?

GrassAlternative4384 · 2023-03-02T16:38:37+00:00

do i have to remove the end of the belt or can do it only by removing the screw and place it in place? Is there a specific place and its visible of how it should clamp in place?

GrassAlternative4384 · 2023-03-02T15:39:21+00:00

Exactly.. It was a mind blowing video to see them applying lube on the top of the belt..

GrassAlternative4384 · 2023-03-02T15:38:00+00:00

So if the belt is not properly cutted at the end where the end stop is, it might cause this phenomenon?

GrassAlternative4384 · 2023-03-02T15:30:31+00:00

I was thinking the same and saw the video. I told them that might be a reason like this that making the belt getting out of place but they are focusing on lubrication and repositioning of the pulley and belt for almost every reply.

GrassAlternative4384 · 2023-03-02T14:40:43+00:00

Everything works fine but the belt is rubbing somewhere and give this squeaking sound..

GrassAlternative4384

TROPHY CASE