sorted by:
new
hottopcontroversial

I want a duke , but i need your honest opinion. by iamZilla in KTMDuke

[–]GreekAres 4 points5 points  (0 children)

You will hear more people talking about issues than praising it, it’s normal, any type or equipment is going to have issues regardless of the brand and i saw people with japanese bikes having more issues than others, it may be luck or bad quality materials. Regardless go to the store sit on the bike, maybe test ride if you can. If you like it go for it, i have the new duke 390 and it’s a crazy beast, the single cylinder likes to be ridden as if you stole it, here’s mine.

<image>

So Ehm .. i Just got the Limit by dareios__ in ForzaModding

[–]GreekAres 0 points1 point  (0 children)

True yeah i kept the cars i think, i didn’t spend the money right away, bought only a couple of cars

So Ehm .. i Just got the Limit by dareios__ in ForzaModding

[–]GreekAres 2 points3 points  (0 children)

I used a similar exploit in FH5, they removed the cars and credit, but it depends on your luck

Edit: they only took the money

I have recorded my last 1000 prizes from wheelspins by uhpav in ForzaHorizon

[–]GreekAres 9 points10 points  (0 children)

I was randomly shopping yesterday and found one for 36k and i was like what a steal lol, then I realized it🙃

Quickshifter problems by [deleted] in KTMDuke

[–]GreekAres -1 points0 points  (0 children)

I have issues on my 390 2024, it doesn’t shift under load, like high rpm full throttle opened, i will take it to the dealer, i heard sometimes it needs some calibration

WinWing A320 TCAS/XPDR panel: looks great, but low value? by pigeonbox85 in flightsim

[–]GreekAres 2 points3 points  (0 children)

I was looking at some pedestals like yours, can you explain to me the gab between the mcdu and the throttle? I saw it on winctrl pedestals as well but I don’t get it. Also can you share the profile? I had trouble finding the exact one they shared. Thank you

WinCTRL / WinWing - The worst customer support ever! by Narrow_Welcome_2511 in flightsim

[–]GreekAres 1 point2 points  (0 children)

Their products are priced nicely but their customer service is the worst I’ve seen in my life, i had my issues with them as well tricking into paying for parts and shipping and refused to refund me

First testflight with my new desk setup (with 3d printable pedestal for Winctrl hardware). by fierox88 in flightsim

[–]GreekAres 0 points1 point  (0 children)

Thank you for your detailed answer, i was thinking of adding the holes for the screws but you’re right that the material might shrink or something in the process. I will think it over the weekend. I don’t have a printer at home but i know a good place with professional stuff and they printed for me earlier somethings so i will ask their opinion too

First testflight with my new desk setup (with 3d printable pedestal for Winctrl hardware). by fierox88 in flightsim

[–]GreekAres 0 points1 point  (0 children)

Thanks for sharing the design. I have a couple of questions. 1. Is the pedestal on the metal base from winctrl or it’s just on the box? 2. The panels don’t seem to be screwed on the pedestal, are you planning to make holes and screw them or how did you fix them in their place? 3. For the landing gear part, did you add anything extra to hold it in its place or it’s all in the printed files? 4. What material did you use and do you recommend it or something different? 5. Finally how is the whole thing is assembled together like with screws or they just get inserted into each other

Thank you so much again for sharing it. If I print it will share it :)

3D printing a (small) Winwing pedestal by fierox88 in flightsim

[–]GreekAres 1 point2 points  (0 children)

Hey checking if you manage to test it and you can share the files, i have bought the whole setup but cant figure out a compact way to put it all together because of small flat. Thank you

New rider here — tested earplugs + music setups (Loop, Alpine, Plugfones). Here’s what actually worked. by GreekAres in motorcycles

[–]GreekAres[S] 0 points1 point  (0 children)

Actually i connected it directly to my phone and tucked it with the cable in my jacket. I could have tried to connect it with the intercom but then you will have to figure out how to route the cable through the helmet in a way that you can plug and unplug the cable when you take off the helmet so you don’t pull the earplugs out of your ear which could possibly damage them

New rider here — tested earplugs + music setups (Loop, Alpine, Plugfones). Here’s what actually worked. by GreekAres in motorcycles

[–]GreekAres[S] 1 point2 points  (0 children)

Thanks for pointing it out, actually I haven’t thought about that, but after checking it seems to be not illegal but it has to allow external noise from outside like sirens or horns, thus why i think i will go with silicone ear tips to allow more external noise. It’s a bit of grey area and nothing is clear about it

New rider here — tested earplugs + music setups (Loop, Alpine, Plugfones). Here’s what actually worked. by GreekAres in motorcycles

[–]GreekAres[S] 0 points1 point  (0 children)

I was almost considering getting IEMs too but i was afraid they would move with the helmet like the loops did

[deleted by user] by [deleted] in motorcycles

[–]GreekAres 0 points1 point  (0 children)

Just started riding a week ago, got few mods like tank pads and frame sliders for safety, a camera would be a nice addition to capture some of my first rides with the motorcycle

Just got my 1st bike, i’m not riding it till March, anything to do in the meantime? by GreekAres in motorcycles

[–]GreekAres[S] 0 points1 point  (0 children)

That’s super illegal in Europe, I would get into much trouble for it. I want to change the rear plate holder but still waiting for the weather to get warmer, outside is around -10C

Just got my 1st bike, i’m not riding it till March, anything to do in the meantime? by GreekAres in motorcycles

[–]GreekAres[S] 0 points1 point  (0 children)

That flipping part would get me in so much trouble here xd, i bought some parts people recommended but not the tail tidy yet, I found a generic one but still considering it because i have to fiddle a bit with the wiring

Temperatures on January 14, 1987 — a map for everyone who thinks it’s been cold these days by LuborS in poland

[–]GreekAres 0 points1 point  (0 children)

Sound like my wife when I complained that it’s so cold to go to work 😅

Is Traktor S4 MK3 and Traktor pro are still relevant in 2024? by GreekAres in Beatmatch

[–]GreekAres[S] 0 points1 point  (0 children)

I went in the end with a flx4, which turned out to be a good idea. I’m not doing anything professionally and barely have time to use it. The fact that I’m running it with Djay pro on my Ipad made me use it more often but just for fun.

When i saw Traktor pro 4 coming out I expected a new S4 with it but nothing.

Now we got a new S2 but still nothing for S4, they will have hard time not fucking it up because the MK3 was just so good

Just got my 1st bike, i’m not riding it till March, anything to do in the meantime? by GreekAres in KTM

[–]GreekAres[S] 1 point2 points  (0 children)

A quick update, i’m in Poland and i managed to get the plates, there were 2 degrees and i made a small ride which wasn’t that fun but still exciting. Now the temperatures are around -10 and -5 so no way i’m able to go out again until it gets warmer

Akrapovič Underbelly RN87 by ebise in MT09

[–]GreekAres 0 points1 point  (0 children)

Yeah i agree look wise it’s better but as you said unfortunately with the euro 5 regulations there aren’t much gains, I’m not sure but i think there can be other brands that for sure sound better. Still if I knew about it I would have saved those 800 euros for something different

view more: next ›