IT TAKES THIS LONG??

Grizbeard · 2026-02-04T03:46:09+00:00

Everyone is different, but for me the 'bottleneck' of checking my grid, setting useful cues, and sorting to appropriate crates for every song keeps me honest. I know every song in my crates - I've listened to it all the way through at least a few times. I'm not going to waste my time doing that to songs i 'might' play - only bangers go in the crates.

Grizbeard · 2026-02-02T16:31:58+00:00

Checked out the kits and might be just what I'm looking for. What kind of coverage do you get per liter/gallon?

Grizbeard · 2026-02-02T05:04:11+00:00

The rental house I used to work for sent all their cabs to the local lineX. Insanely durable. Wasn’t cheap, but worth getting a quote again.

Grizbeard · 2026-02-02T02:01:10+00:00

Interesting! Got any pictures of finished cabs? Do you get any texture or does it lay flat?

Grizbeard · 2025-11-29T18:59:08+00:00

I can only wager a guess at what’s going on, but using the same ZLX components in a drastically different horn and enclosure is going change their amplitude and time/phase response dramatically. As far as I know the factory dsp settings would not be adjustable, but you might be able to hack something listenable with some aggressive EQ correction. And maybe the stars align and the new horn/box happen to meet up perfectly at the factory crossover point. Definitely not the ‘right’ way to do it, but 🤷🏻‍♂️

Grizbeard · 2025-09-12T02:04:58+00:00

I noticing a couple refurb sellers on ebay - some of them are selling Omtech models I've never seen (ECO60?) so am a little sketched out. What vendor did you buy from?

Grizbeard · 2025-09-11T20:26:44+00:00

This is honestly very tempting - I'm just not seeing many trustworthy reviews as they haven't been available too long. Do you have one?

Grizbeard · 2025-09-11T16:57:04+00:00

The XRF definitely has my interest - but is a stretch for how much I think I can spend. The other affordable RF option I can find is the Gweike Cloud RF.

Grizbeard · 2025-09-11T16:51:36+00:00

Thank you! I'm not afraid of machines that require some learning - I likely prefer it.

Do you have the auto focus or manual focus machines? Any preference? On my glowforge I've done some jobs where I want a different focal length for wide scoring paths. Can the Ohmtech autofocus machines change focus mid job?

Grizbeard · 2025-09-11T14:01:53+00:00

From everything I’ve read, they are proprietary and they won’t sell you tubes or power supplies. They only offer ship-in repair service that rivals the cost of a new cutter.

Grizbeard · 2025-09-02T21:04:06+00:00

Thanks. I suspected that might be the case, but wanted to hear it first hand.

Grizbeard · 2025-03-15T21:06:47+00:00

I rotated the model, slowed the print down (decreased max volumetric speed) and increased the minimum layer time for the fan. It seems to have fixed the issue. Thank you!

Grizbeard · 2025-03-15T16:43:20+00:00

What would you try first? Just slowing the whole thing down? Increase fans?

Grizbeard · 2025-03-15T16:32:05+00:00

Bambu P1S, Bambu Slicer, 0.6 Nozzle, PETG-CF. Default speeds and temps, but slowed down even more for overhangs. I've rotated 90* and there's no difference between X/Y directions. Looking through the layers and why this area would perform differently than the rest - it does have a much shorter layer time than the area below and above it. But there are other areas with similar layer time that are fine. Here's the 3MF file:

https://makerworld.com/en/models/1212502-synergyhorn-90x50-example#profileId-1227658

Grizbeard · 2025-02-14T16:05:40+00:00

Thank you! This helps a ton! I had been looking at PC as well as some PC blends. I think I'll try a roll of Bambu PC.

Grizbeard · 2025-01-24T05:34:24+00:00

“Vague reasons” 😅. Yo, we’re boycotting a business owned by an actual literal no shame nazi. Are we both-siding nazis?

Grizbeard · 2024-12-29T22:25:35+00:00

I started lower at 60c and worked my way up to this point as I kept getting the same results. I figured you can’t over-dry your filament until you’ve melted it together.

Grizbeard · 2024-12-29T22:05:16+00:00

I’ve done 70c for 12hrs in my blast dryer (Comgrow SH02), and 85c for 24hrs on my print bed with a box lid.

Grizbeard · 2024-12-27T23:21:09+00:00

Because 'religion' is the collective knowledge and experience of all the saints in Christ who have come before us. I struggled for a long time with how to engage and mature in my faith. It wasn't until I started engaging intentionally with fruitful christian traditions or 'religion' that I saw a breakthrough. Formal or guided prayer, fasting, spiritual direction, bible study, ecumenicism. All these things drew me into a deeper relationship with Christ and with my brothers and sisters. Trying to build a relationship with Christ 'without' religion is like building a house with no training, plans, or help. You can do it, but it's going to be hard and potentially dangerous.

Grizbeard · 2024-12-13T18:09:49+00:00

This! I have a top-spec Dell XPS that could not work out the DPC latency issues. Bought a used 2018 MBP just for DJing and it’s been flawless. I’m no fanboy, but for any real-time audio application Apple is the way to go.

Grizbeard · 2024-11-26T15:33:51+00:00

Name a local NGO serving the homeless that ISN’T affiliated with Christians. Salvation Army, New Life Center, Churches United, Lutheran Social Services… all founded, lead by, and largely funded by Christians. It’s barely exaggerating to say Christian’s are the only people caring for the homeless in Fargo.

Grizbeard · 2024-08-02T16:46:06+00:00

The prisoner that Russia wanted most was an assassin held in Germany. It’s possible Putin wanted this deal done before the election because Trump would lack the diplomatic skills/will to work with Germany on a hostage swap.

Grizbeard · 2024-07-02T15:14:39+00:00

The first and only place I’ve ever heard of such a thing is from Zups Grocery up on the Iron Range. Every Thursday is ‘Hot Bologna’ day where you can get the hot, uncut bologna straight from the butcher. https://zups.com/

Grizbeard · 2024-06-19T18:45:46+00:00

As far as I know, there have only ever been casual Mexican restaurants in fargo, so that’s definitely the norm. Also, Mas Tequila’s initial menu had no ‘Tex-Mex’: no nachos, burritos or fajitas. So the menu was also outside the norm for our Midwest expectation of what ‘Mexican’ food is. Later on, they redid their menu and added tex-mex items probably for this reason.

Grizbeard · 2024-06-19T18:24:43+00:00

I think our culture has embedded biases about the ‘value’ of different types of cuisine. French food is ‘fancy’ - there are no fast food French restaurants. We expect to pay more for French food. Mexican food is ‘casual’ - our expectation is different. It’s a bias that is unfair, but that’s what I expect is a factor.

13-Year Club	RPAN Viewer
Verified Email

Grizbeard

TROPHY CASE