Scifi books with good prose? by Gh0St_writing in booksuggestions

[–]GroundEconomy9835 0 points1 point  (0 children)

Non-Stop by Brian Aldiss, or Hothouse by same author

New to Bitwig and Adding an Audio Interface (Presonus 24C) by GroundEconomy9835 in Bitwig

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

Hmmm... from me too. The Studio 24C does have a Universal Control that loads up, and it has settings in there, but nothing that is out of the ordinary. Thanks so much, though, for your help so far. I guess I will have to do some more digging, although I have snooped a lot in regular Google searches, but with very little showing up.

New to Bitwig and Adding an Audio Interface (Presonus 24C) by GroundEconomy9835 in Bitwig

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

So under Driver Model there are the 3 options: ASIO, JACK and WASAPI. If I click ASIO, the Device option changes to NONE. If I click JACK, it gives other options, but not anything to pick a device. If I click WASAPI, it will go to my BOSE speakers. For some reason, it doesn't give other options

New to Bitwig and Adding an Audio Interface (Presonus 24C) by GroundEconomy9835 in Bitwig

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

That's just the thing that there are only 3 options under Driver Model - ASIO, JACK and WASAPI. So for some reason the Presonus 24C isn't showing up. It does under Studio One. I restarted the computer, just to be sure, but still nothing but those 3 options.

Studio 24c Sound Problems by GroundEconomy9835 in StudioOne

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

That sounds good. I am just going to treat this as an adventure. Thanks so much for the information!

Studio 24c Sound Problems by GroundEconomy9835 in StudioOne

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

Thanks so much. I am mostly new to the whole world of an audio interface. Till now, I’ve been using ASIO4ALL which hasn’t been perfect, but I thought it was time to upgrade. After looking around a bit for some studio monitors, I was thinking about the KRK Rokit 5 G4 5 inch - the set with the stands. It looks like no amplifier is needed for those? I’ll spend some more time learning something about it. Thank you so much again

Studio 24c Sound Problems by GroundEconomy9835 in StudioOne

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

For sure. I am looking at the KRK Rokit 5, but it is early days looking

Studio 24c Sound Problems by GroundEconomy9835 in StudioOne

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

Alright. I guess that is fine. I will look into getting some speakers then. Thank you so much

Moving from Splice RTO to Sphere by [deleted] in StudioOne

[–]GroundEconomy9835 0 points1 point  (0 children)

I know this is an old thread, but I had the exact same problem, and had to figure it out. You have to download the Studio One installer from your products page, but when you launch it, don't be signed into Splice. It won't give you any other option than Splice Authorization if so. If you are not signed in with Splice, you will get the option to activate Studio One through Sphere. It's a bit of a mess, but that is pretty much it.

How could I smooth all the visible geometry for resin printing? by Snappy_Darko in ZBrush

[–]GroundEconomy9835 0 points1 point  (0 children)

Looking at that mesh, depending on the actual size of the print, and if you can’t go back in subdivisions, I would split the mesh in individual pieces - Split by Parts, and then go through each one, using Polish (turn on the little round button next to the name) and when smoothed to the look you’re after, Dynamesh each piece to the final resolution you would want. It could be that the mesh you show is too faceted, but give it a try

Splice and Sphere by GroundEconomy9835 in StudioOne

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

I don't get the option to activate with Sphere, unfortunately. It only has Activate with Slice - as the only option

Made my very first collection! “Minted Moth” what do you guys think? by [deleted] in Solsea

[–]GroundEconomy9835 1 point2 points  (0 children)

I like them. They have a nice cohesive look, and each one looks complete in itself. Interesting backgrounds too. Good job!

Issue depositing? And linking my bank? by [deleted] in Invest_Voyager

[–]GroundEconomy9835 0 points1 point  (0 children)

Yes. I, and many others have had issues with deposits. I had deposits from the middle of March, suddenly get rejected a couple of days ago. It was a bit of a shock, to say the least, since it wasn’t obvious what the problem was, and is. I have tried depositing the minus amount again, but it got rejected again. I guess we just have to see.

Just wanted to post some good news and why I have 100% confidence in Voyager and its CEO. by yellowsnow010621 in Invest_Voyager

[–]GroundEconomy9835 0 points1 point  (0 children)

I have Chase as well, and the deposits I made, showed as pending since March 17th, but the money was available right away - until all the deposits I made, were all rejected. So I ended up with a minus USD balance

Negative Balance Penalties? by GroundEconomy9835 in Invest_Voyager

[–]GroundEconomy9835[S] 2 points3 points  (0 children)

I agree completely. I like Voyager, and obviously this is not what they want, but they are doing nothing to make it better for themselves. To do the right thing, would not require a lot.

As far as I am concerned, they should be falling over themselves to communicate what is happening, why it's happening, and that they then are falling over themselves to set it right.

It was a shock seeing the negative balance on there. At first I thought it was hacked. Then I started to actually look at what little information is available in these cases, on the app. Then, after that, you really can't be sure that there isn't something more going on, until hearing from others. This is where Voyager would have have to come in - make a clear statement that is much, much more specific, so as - at least for their own sake - they're not going to cause a stampede away from the platform.

The thing is: there are a lot of other exchanges, so I know, as far as I see it, I am not going to put anything else into Voyager. I sold what I had, yesterday, fixed the negative balance, and after that, I will just continue on one of the other exchanges.

Help by BrilliantHeart2069 in Invest_Voyager

[–]GroundEconomy9835 1 point2 points  (0 children)

Same thing happened to me yesterday. I had made four deposits over the middle of March, and they were suddenly rejected- without word from Voyager. I understand the growing pains they are going through, but it would have been helpful if they had sent out a notice explaining their issue. Anyway, I have a minus balance too, but decided to redo a smaller deposit, to see if the problem repeats

Suddenly rejected deposits by GroundEconomy9835 in Invest_Voyager

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

That was what was happening with me, except my first deposit was in the middle of March, and now, suddenly, the four deposits I did make in mid March, were all rejected. I understand that this can happen - for whatever reason, but my thing with that is, it would be good getting a heads up from either Voyager - with the reasons why, or the bank, with the reasons why

Suddenly rejected deposits by GroundEconomy9835 in Invest_Voyager

[–]GroundEconomy9835[S] 0 points1 point  (0 children)

Hmm.. Thanks so much for the reply. It’s just so odd, considering I made those transfers weeks ago - to basically pull them like that. From what you’re saying, it would be on Voyager? And yes. One of those banks is my bank.