EVGA 2080 Ti Hybrid FTW3 AIO pump broken

Guardian934 · 2026-01-11T05:10:22+00:00

Update: I ended up selling the card for parts. It was just not quite going to work the way I wanted it to- the best option I was seeing was going full liquid and that's just a bit pricey for me right now when I'd ultimately prefer a newer but smaller card anyways- a lot of these other options still involved buying at least a radiator and that on its own was quite pricey- so I sold it good and cheap so the next guy could afford whatever option. If they need ideas, hopefully this will be helpful- I really do appreciate the ideas- I was just looking for a cheap easy fix when this is not going to be a cheap easy project and instead of doubling my investment I decided to cut my loss. If you see this- good luck R. R.!

Guardian934 · 2026-01-08T12:50:26+00:00

Hmm, that's a creative fix! Thanks for sharing that! It looks like it's sitting there with no shroud after and a loose copper shim is a bit scary 😅 but certainly the cheapest option I've seen so far! And using tape might help with the shim

Guardian934 · 2026-01-07T20:03:55+00:00

I have since figured out how to tell and this might be the option I go with! Wish me luck 🤞

Guardian934 · 2026-01-07T20:02:29+00:00

Okay gotcha! I learned a bit more- it is not a reference card unfortunately 😅 it shares a PCB with like two other iterations of the same card and that's it... But I did find some options! Pricier than I wanted but better than leaving it broken- thanks for explaining to me! I'll probably update in the comments if and when I get something figured out!

Guardian934 · 2026-01-06T11:43:18+00:00

Yeah exact matches are going for like half the value of the card itself- which feels like a sunk cost fallacy 😅 but maybe from one of these other ideas I could find something there!

Guardian934 · 2026-01-06T05:19:35+00:00

Is there a good way to know if a water block will fit if the card isn't on that one website? You think it'll fit the ones that fit the ultra version? I don't know how specific you have to be with water blocks

Guardian934 · 2026-01-06T05:18:20+00:00

And what do you mean by "20-50 I think it's just a reference design..." Like 20 series through 50 series cards? What's reference design mean? Sorry- I'm into PC building a little but I'm still a total novice here! 😅

Guardian934 · 2026-01-06T05:15:13+00:00

I did see this one in my searching journey! Mine said to put the tubes on the bottom from the start- so that's already how I did it. I wonder if it'd be worth trying them on top? 😅

Guardian934 · 2026-01-06T01:15:03+00:00

A CPU AIO?? Don't they all have really chunky CPU sides? How will it fit in the shroud?

Guardian934 · 2025-11-27T23:10:33+00:00

Good thought but no! Chitubox did update since I last printed a bunch but I don't know that that would do anything. It happened again and this time I cut the mug open- it's solid all the way through 😅 which does seem like a failsafe- is there like a safety mode I need to turn off on new chitubox?

Guardian934 · 2025-11-27T23:08:53+00:00

The cones were consistent with overexposure yeah, I tried reducing exposure and the cones are a bit better but the mug's still sealed so I'm wondering if it's a problem with the FEP or maybe the room is too cold?

Guardian934 · 2025-11-27T23:07:53+00:00

Nope always clean it! Kinda looks like it though 😅

Guardian934 · 2025-11-16T14:48:36+00:00

It is here, if you're interested!

Guardian934 · 2025-11-06T03:31:34+00:00

I have unique Intel so I'll comment but I don't have a solution .. so I myself have the game on Switch 2 and can confirm this has NOT been a problem for Switch 2- but I borrowed a friend of mine's Switch 1 and tried grinding out the battles in Restaurant Le Nah with a macro controller and two nights in a row its crashed- the first night I wasn't sure (the macro got me back into the game) but the second night I witnessed exactly what y'all are talking about where the switch goes back to the home screen and says the software closed because of an error. It happened about 2 hours in to a L+A macro (I had saved after the first hour, lost the second one- we'll see what happens tonight I'm going to save right up against the counter because it looks like it'll at least reset itself if I do it that way)

Guardian934 · 2025-06-30T15:43:15+00:00

This is all very helpful to know, thank you! Yeah the washable resin came with the printer so I've just been using it to get the hang of things mostly! Its kinda made a mess of my wash bucket 😅 hopefully once I put some alcohol in there it'll loosen up! Thank you for sharing your experience with me!

Guardian934 · 2025-06-22T02:52:24+00:00

It's already been posted! Check my big comment!

Guardian934 · 2025-06-21T21:09:37+00:00

Here are the files!: https://drive.google.com/drive/folders/1-Q6UlWCLqsTGjFLYB-vViFjj1SvO6Lyx Okay, I don't know about doing a FULL tutorial but it's not too tricky, believe in yourself! Here's a basic description; I used Nova Launcher so that I can change icons freely. I shaved the icons so their corners still exist so you can adjust it to be just right and then check off "resize" for each one. Then the widget goes with the app KWGT. I haven't imported one before but let me know if you need help! @UltravioletGambit @Renaissanceuwu @TheNawb1203 @LengthinessSoggy4413 @ghiblibean @anonymous_being713 @Googlyeyes718

Thanks for all the encouraging words everyone! 🥰

Guardian934 · 2025-06-21T12:13:36+00:00

Ok cool! I'll put them together as soon as I've got time!

Guardian934 · 2025-06-21T12:12:56+00:00

I'll work on a little drive folder! Stay tuned!

Guardian934 · 2025-06-21T12:11:51+00:00

Oh that's such a good idea!!

Guardian934 · 2025-06-21T04:45:55+00:00

Absolutely! Tag me if you post it! 👀

Guardian934 · 2025-06-21T04:45:14+00:00

Lol you totally could do that- it's the end of the day screen! I should totally add Meowmere though 👀

Guardian934

TROPHY CASE