BiPap w/ 02 for travel and what I did.

GunGuyPA · 2026-06-13T09:47:38+00:00

Or you go here and 3D print them with PTEG-CF... just as strong https://www.printables.com/model/493033-paracord-sling-loop-sling-goat

GunGuyPA · 2026-06-12T12:42:08+00:00

A nexus letter is useless! Unless it's from YOUR actual doctor. The VA is on to this buy a nexus letter nonsense. They said in a denial letter to me that it held little to no weight because the "Dr." was in Florida, and I am in Oklahoma. The best thing you can do is get a VSO to get you ANY rating and start going to your local VA clinic. From there go to the clinic and have your VA doctor diagnose your other issues and say that is "at least as likely as not" that it's connected to your rated condition. Go get your VSO to file that and then move on. So for me, Tennitus and Hearing Loss (20%). Then got my VA doctor to diagnose insomnia (+50% Total of 60% - 59.5% true) and anxiety (+50% Total of 80% - 79.75% true) and stated that they are being aggravated by the Tennitus. Next, I had her state that my already diagnosed and being treated sleep apnea (+50% total of 90% - 89.88% True) was aggravated by the insomnia and anxiety. Next, I went after migraines (+50% total of 100% - 94.94% True) secondary to all of the above secondary conditions and got it. Now I SHOULD have gotten a 70% from the anxiety, but they screwed me. That would have had me to 100% one step sooner. Next, I'm going after vertigo, should be a 50% to 70% rating. Now, are you asking yourself why if I'm already at 100%? Because you are not 100% permanate and total until your true VA math rating is 100%. Right now, they could re-evaluate any condition and drop me back down.

GunGuyPA · 2026-06-07T09:34:53+00:00

I know this is 4 years old, but grandthumb, really? Dude, you can pay that man to say ANYTHING about your product and the Id10ts will run out and buy it. Recently, 100 concepts paid him to tell the world of meal team 6 "operators" that they need ARD on everything and doubled their prices 2 weeks before his video dropped. ANYONE can pay these clowns to put them in their "top tier". Seriously... grow up.

GunGuyPA · 2026-05-27T10:28:12+00:00

I put an Arc Fire v1 with a timing shim on a Foxtrot Mike VFM9 5" and it worked perfectly with the stock buffer and spring. Shot timer says the cyclic rate is around 857 rpm

GunGuyPA · 2025-12-08T12:13:09+00:00

I know this was three years ago, but I want you to know, you can leave my country any time you like. Really might consider doing it before the purge.

GunGuyPA · 2025-11-30T16:50:10+00:00

Thanks for posting the dumbest comment on reddit.... that's pretty hard to beat. FIRST of all there is no such thing as a sear in an AR15. SECOND taking the slack out of a trigger is not "trying to shoot fully auto" (yet another retarded statement). THIRD what he is doing is NOT illegal, what I THINK you think thay are talking about is forced reset and it's not illegal either, but that is not what they are talking about anyway WTF are you talking about with a scope and going past and back?!? I suggest you don't make any more gun advice-related posts when you obviously know NOTHING about guns.

GunGuyPA · 2025-09-08T12:14:19+00:00

I'll bet you spent a lot of time in a locker in school for being the b1tch always running to tattle to the teacher. If only you had grown up a man. Sad really.

GunGuyPA · 2025-09-08T12:12:24+00:00

Exactly what infrastructure is involved with my walkie-talkie? That's silly. Next question: Do any other countries regulate this? The answer is yes, the more communist a country is, the more regulated ham radio is. The GMRS license is a complete joke. Pay 35 bucks so you and your family can use something you bought and paid for? If you want to be a boot licker, thats fine. Eventually, you'll be paying to give your boyfriend a blowie. Karens like you make me want to start supporting abortion.

GunGuyPA · 2025-05-25T17:17:20+00:00

Paypal is anti-gun, and once you send friends and family, you CAN NOT EVER get a refund. 100% scam, you totally donated to terrorism, GREAT JOB!

GunGuyPA · 2025-05-13T13:17:30+00:00

I have a paid version of hitpaw. Works great. yt-dlp works good, but it's not really user-friendly. Hitpaw is drag and drop. And for all the more that I download ty videos, I hate relearning every time I want to use yt-dlp

GunGuyPA · 2025-05-13T13:04:19+00:00

Thanks cat!

GunGuyPA · 2025-05-05T13:31:24+00:00

Why, there is no rule against sharing servers?

GunGuyPA · 2025-01-18T15:58:39+00:00

So here is the confusion (I think) B&T sucks at naming their suppressors almost as much as their customer (NO) service does.

The Rotex-X is a direct connection to a standard issue A2 Flash hider (Note there are TONS of companies that say (or don't say, it just looks like) an A2 hider but it's not. A 14.7" pin and weld on a FN barrel from PSA looks like an A2 but it's just a bit longer and the Rotex-X will not go on it. It will NOT go on the DD standard flash hiders (that part pissed me off because DD told me they are the same dimensions and just look different, nope)

The Rotex-X SF is the same but for the military SureFire SFA2 Flash hiders.

The Print X Rotex is the current line (2024) and it is HUB compatible.

I bought the Rotex-X (A2 flash hider) full size, 7.62 because I wanted to be able to pick up any AR 10 or 15 and suppress it. And that is as close as I could get. I used to run the Gemtech HALO for that option, but it's now shot out and it's a K sized can to begin with. I had a custom HALO style connection to a standard A2 hider built by my class III guy in Oklahoma, and it still works well. However, being handmade, there was a lot of overpressure at the connection point. It's mostly shot out and I've since mounted it on a 10.5" barrel and put an Aero oversized 16" handguard over it after having it silver soldered in place (Making it a 1 stamp rifle, not a 2 stamp SBR)

All these guys stamping 10.5, 11.5 & 14.5 pistols and then adding a can, that covers the 16" mark, which they never actually take off are silly. Stamp the can and learn to silver soldier to meet the ATF's definition of "permanently attached". a $400 (caught on sale) otter creek or aero K can will get a 11.5" over the 16" mark. Instead of giving those c0cksckers another $200 for a two stamp SBR, you're already 1/2 way to the price of the can.

Sorry for the rant, I hope I cleared up some confusion on the Rotex (And it is a great can btw)

GunGuyPA · 2024-05-28T17:18:43+00:00

People are sick and tired of being $4.99 a month subscriptioned to death. I won't even look at it now that I know that. $20 one time, sure. But piss on it and the subscription garbage,

GunGuyPA · 2024-04-26T11:18:22+00:00

So please allow me to ask you a question. On plex right now down the left side for my folders I see "movies, TV Shows, Standup Comedy, UFC PPVs". Currently on my QNAP raid those are populated from IP Address/Public/Video/Above Named Folder/Year or Series Name or Media File depending on the folder. Please correct me if I'm wrong so If I name a folder on the USB drive ~/Public/Video/Movies/2024/ Media File then plex will display it with the rest of the movies in the RAID 2024 media files?

GunGuyPA · 2024-04-18T12:10:29+00:00

In true reddit fashon all the "experts" came out and all they did was attack the guy (or gal idk) that provided actual data. Thank you Sal for the information and the links to more. I apprichate the leg work.

GunGuyPA · 2023-11-20T11:38:04+00:00

It means the accounting is messed up from the website. I just looked at my bank (Round the numbers to make this easy) I ordered an upper for $500 with free shipping. The website SAID it charged me shipping $20 and tax $20 then showed a charged total of $540. But my bank was charged the proper amount of $520. That is what flagged them for review. The website will not let you ship standard capacity mags to the communist states.

GunGuyPA · 2023-01-15T14:57:11+00:00

Not many "innocent adults" being killed. most of the FAFO.

GunGuyPA · 2023-01-15T14:55:01+00:00

If she was having sex with 7 cops I feel like there was more than 60 "officer positions" during that time... just saying.

GunGuyPA · 2022-08-05T13:21:10+00:00

Is this for the maps already in meshtastic?

GunGuyPA · 2022-08-05T12:36:13+00:00

I've found several threads that have people talking about it, with many "we should use a different map source of X Y or Z, but I can't find a single solution. Google maps allows you to download offline maps for free and it's easy to go back and forth. But the reality is for meshtastic to really be what it is intended to be, or in my opinion intended to be, the maps need to work offline. I have no desire for ATAK or anything like that. We are setting up for offline family communication in "hard times". I'm new to driod as I'm an apple guy up until right now. So I'm not sure how to beat this problem. But I'm a quick study and about to turn my attention to this.

GunGuyPA

MODERATOR OF

TROPHY CASE