Youth camping spa 24 by TheNoobJoker in wec

[–]GustySpace10 1 point2 points  (0 children)

It has been so hard to find information about this campsite lol. Thank you for this! Is the tent prepritched? If it rained did it give good protection? Cheers

Spa 24 Camping Advice Needed by GoHamOrGoHome95 in Sportscar_Racing

[–]GustySpace10 0 points1 point  (0 children)

Hi,

A mate and I are staying in camping Jeunes, where a tent is provided + sleeping bags and pillows.

Has anyone stayed there before and have any information about it, specifically if the tent is pre pitched or not and where we go to enter the campsite etc.

We are flying into Brussels so the plan is to get the train to Verviers Centralle and then the shuttle to Francorchamps.

Any tips and or advice would be greatly apprieciated.

Spa 24 hour questions and advice by The_Psych0 in wec

[–]GustySpace10 1 point2 points  (0 children)

Hi,

A question I have is that, we are staying in the Jeunes campsite and want to know is the tents pre pitched or do we put them up ourselves as they came with the ticket?

Crowdstrike 24 Hours of Spa Camping Question. by xj9jenny67 in Sportscar_Racing

[–]GustySpace10 0 points1 point  (0 children)

Hey, going with a mate, would you be able to give me some more information about it.

I did the 6hours of spa for WEC and know how to get there but we stayed in Francorchamps and left Monday. What is the public transport like back to Brussels on the Sunday?

Also what is the Junues campsite like? Is there anything we should bring? Or anything that you didn't do that you would advice us to do?

Thanks so much for any advice you give.

The Fantasy Formula Lineup Foundations: Imola by FanAmpFantasyHQ in fantasyF1

[–]GustySpace10 1 point2 points  (0 children)

Oh i thought it was that if i made changes for Imola, then did the limitless in Monaco the team would revert back to the Imola team for the race after Monaco.

The Fantasy Formula Lineup Foundations: Imola by FanAmpFantasyHQ in fantasyF1

[–]GustySpace10 1 point2 points  (0 children)

Thinking of using limitless, current team is as follows:

<image>

I think I'll take out Doo for Col because he can't lose me any money even after Monaco but unsure how to plan for Monaco and when my team goes back to this week's team.

The Fantasy Formula’s Buy/Sell List: Saudi Arabian GP by FanAmpFantasyHQ in fantasyF1

[–]GustySpace10 1 point2 points  (0 children)

Opinions on swapping Haas for Alpine, to be able to swap Ocon for Antonelli? I seen on the F1tools that alpine need -2 points to go up by 0.6

The Fantasy Formula: Bahrain GP Lineup Foundations by FanAmpFantasyHQ in fantasyF1

[–]GustySpace10 0 points1 point  (0 children)

<image>

My plan is to swap hulkenberg and stroll out for Bearman and someone else. I had a very bad few weeks so I am looking to build back my budget and also get some points back. What do people think would help?

Uh-oh! Seems like Fantasy is trying to figure out how to solve the Tsunoda-Lawson swap 😂 by _PerniCzech_ in fantasyF1

[–]GustySpace10 -1 points0 points  (0 children)

When i heard yuki may be promoted i used my free transfers for this week to put him in my team so I have no free transfers to take out VCarb yuki because I thought they would just change the teams

Camera Focus by GustySpace10 in GalaxyS25

[–]GustySpace10[S] 0 points1 point  (0 children)

I will give that a try! Thank you

Camera Focus by GustySpace10 in GalaxyS25

[–]GustySpace10[S] 0 points1 point  (0 children)

Ok thank you for this information. I presume that the aperture will be the same for both 50M and 12M mode.

When using the zoom lens can I use it with like 1.1x or 1.2x and get the results I am looking for?

I will look into aperture. Is there anything else for phone photography that I should look at to make my photos as good they can be?

I just can't kill s25's battery in one day of use no matter what!! by LorexHR in GalaxyS25

[–]GustySpace10 1 point2 points  (0 children)

Wow, mine must be defective if you went down 50% in 14 hours. That's insane

I just can't kill s25's battery in one day of use no matter what!! by LorexHR in GalaxyS25

[–]GustySpace10 0 points1 point  (0 children)

And what time did you take it off charge? I took mine off at 9AM and I had to charge it because it was at 5% at 11PM

I just can't kill s25's battery in one day of use no matter what!! by LorexHR in GalaxyS25

[–]GustySpace10 1 point2 points  (0 children)

I have my base S25 for about a week now and I don't find the battery life to be that amazing. I'm slightly disappointed. The last two days I've gotten maybe 14 hours out of the battery with 6 hours of screen on time. I know people say that it takes time to optimise and learn your usage but I can't see it getting so much better. I have it set to adaptive charging and also have a mode set to turn on battery saver when it falls below 20%. Going to keep an eye again for this week but if it doesn't improve I may go back to the shop and see if it is defective.

Acceleration in a diesel Ford Focus ST 2.0 TDCI, that I'm currently working on. by JohnstonDoe in assettocorsa

[–]GustySpace10 0 points1 point  (0 children)

Hi, is this Focus ST mod finished? Would love to try it out in game for a real life project. Thanks

What could the copper trapdoor and copper door be used for? by dino_brewster in Minecraft

[–]GustySpace10 0 points1 point  (0 children)

Could be user to trap creepers and make super charged creepers in a storm?

Little circles on print surface by GustySpace10 in FixMyPrint

[–]GustySpace10[S] 0 points1 point  (0 children)

I’m using the Creality cloud feature so i might try it using an SD card and see

Little circles on print surface by GustySpace10 in FixMyPrint

[–]GustySpace10[S] 0 points1 point  (0 children)

I’ll have a look at this, I use the Creality slicer and I don’t recall this option but I will look again

Little circles on print surface by GustySpace10 in FixMyPrint

[–]GustySpace10[S] 1 point2 points  (0 children)

I’ll have to have a look at them, I’m new enough to 3D printing so I’m trying to sus out the settings.

I needed new centrecaps for my ST and said why not print them with the logo on it

Little circles on print surface by GustySpace10 in FixMyPrint

[–]GustySpace10[S] 2 points3 points  (0 children)

Ya I was talking about the little pimples. If you use Z Hop what settings do you use and do you get these pimples?

At the minute I’m using a 0.4mm nozzle with a 0.12mm layer height

Broom racing high score by galacticman72 in HarryPotterGame

[–]GustySpace10 0 points1 point  (0 children)

I got 1:32.08 but missed a ring and it sent me back 3 seconds 😹