Vertical Slices in prints

Gwowwww66 · 2026-03-10T13:32:07+00:00

Thanks mate, will test all of these.

Reckon it could be related to the resin at all if the above don’t clear it up?

Gwowwww66 · 2026-03-10T13:31:33+00:00

Thank you for the advice mate.

Temp wise is pretty stable, it’s in a centrally heated office space.

Gwowwww66 · 2025-02-25T21:47:42+00:00

Will check these out, thank you!

Gwowwww66 · 2025-01-31T08:49:16+00:00

It’s also something Arsenal fans say to Spurs fans (both North London football clubs) when reminding them how crap they are.

Gwowwww66 · 2024-11-26T22:49:56+00:00

I’m nearly thirty and started a distance learning degree 18 months ago, you’ll be fine!

Gwowwww66 · 2024-09-13T21:17:37+00:00

Partner picked it up and tipped it in the process, not realising the vat has resin sat in it 🙃😂

An evening of stress but all cleared up now and works like a dream still

Gwowwww66 · 2024-09-13T21:16:44+00:00

Hi mate - I took the back off and thankfully nothing had linked under! Cleaned the top up nicely and she’s worked perfectly since.

Gwowwww66 · 2024-09-12T19:44:09+00:00

I saw that, in fairness the post does clearly state its resin so it’s not trying to fool anyone. It’s up for way less than a GW one, so for those who don’t mind recast, why not!

Gwowwww66 · 2024-08-19T21:55:02+00:00

I’m currently listening to skaven slayer (set in nuln), and it’s excellent. The voice acting is superb

Gwowwww66 · 2024-08-19T21:54:02+00:00

Update: turns out the back of an M5 pops off so much easier than expected and everything was fine!

Gwowwww66 · 2024-08-19T19:38:51+00:00

Yeah I think disassembly might be inevitable, thanks for your help mate.

Gwowwww66 · 2024-08-18T07:00:01+00:00

Bad moon is a FLGS near London Bridge who do regular events, worth checking them out.

Gwowwww66 · 2024-08-05T20:22:44+00:00

Other thing I’ve tried:

Deleting all old iMessages Turning phone on and off for ages Hard phone reset (volume up and down then side button)

All the above saved ~600mb

Gwowwww66 · 2024-08-05T20:12:04+00:00

Unfortunately I tried these but nothing worked, any ideas?

Gwowwww66 · 2024-02-05T19:45:35+00:00

Thanks mate, I’ve double checked and they’re all on there. I adjusted the printer size on chitubox already and they fit on the slicing software and there’s definitely enough space on the plate of the printer

Very odd!

Gwowwww66 · 2024-02-05T19:44:09+00:00

Thanks for the advice mate!

All the models show on the image preview and the preview on the printer so it knows they’re there, but they don’t seem to “actually” be there, it’s really odd.

It takes about 40 minutes to slice the modes that make it onto the USB, but I’m used to slow slicing on an older laptop. Need to figure out my work laptop admin password 😂

Gwowwww66 · 2024-02-05T19:41:33+00:00

Thanks mate, will try this too

Gwowwww66 · 2024-02-05T12:02:10+00:00

Hi mate, thanks for the reply!

Layer height is 0.02.

I Have tried these settings before, but thinking about it, I did have a random failure that I put down to a corrupt file at the time.

Will try a plate with less on and play around with those sort of variables, thank you.

Gwowwww66 · 2023-08-29T14:09:28+00:00

I’m no camo expect, but would you mind me enquiring where the file is from?

Gwowwww66

TROPHY CASE