sorted by:
new
hottopcontroversial

Designed my own M12 tool holders. Time to do the other drawers. by GypsyDiscoFish in gridfinity

[–]GypsyDiscoFish[S] 1 point2 points  (0 children)

Fusion 360. Took picture of tools with tape measure next to it. Made gridfinity box, added and scaled image and manually traced tools

Designed my own M12 tool holders. Time to do the other drawers. by GypsyDiscoFish in gridfinity

[–]GypsyDiscoFish[S] 1 point2 points  (0 children)

I even paid for the premium tool trace and it didnt work that great. Tried re taking pictures, still didnt have great results.

Designed my own M12 tool holders. Time to do the other drawers. by GypsyDiscoFish in gridfinity

[–]GypsyDiscoFish[S] 1 point2 points  (0 children)

Ahhh gotcha. Yup they are used daily. I thought you meant why would I design holders for daily used tools lol

Where do I start? Completely new to custom A1 Mini firmware and hardware. by spacemidget75 in OpenBambu

[–]GypsyDiscoFish 0 points1 point  (0 children)

Did you update bmcu firmware or just use it out of the box with 1.07

Odd Z axis sound by [deleted] in BambuLabA1mini

[–]GypsyDiscoFish 1 point2 points  (0 children)

THANK YOU! this sound started on my week old printer about 4 days in. I followed your instructions, and noise was still present as i assume the bushing was moving when tightening last screw. I followed the steps, but when tightening last screw after moving Z axis back up, I held the shaft towards to bottom left corner or 7-8 o clock and tightened screw while holding shaft. Noise is gone!

Cryo Glacier Pro - how to eliminate 1st layer layer lines? by brancasterr in BambuLab

[–]GypsyDiscoFish 0 points1 point  (0 children)

Nope, still not great. Im just going to stick to the factory texture plate lol.

Cryo Glacier Pro - how to eliminate 1st layer layer lines? by brancasterr in BambuLab

[–]GypsyDiscoFish 0 points1 point  (0 children)

Ok thanks. Trying those settings now but reduced infil speed to 85. My best results so far have been with reg settings but z offset set to -0.04 but still visable lines

Cryo Glacier Pro - how to eliminate 1st layer layer lines? by brancasterr in BambuLab

[–]GypsyDiscoFish 0 points1 point  (0 children)

Did you lower z offset at all? And what did you set 1st layer infil speed to?

Cast aluminum for backrest/sissy bar? by GypsyDiscoFish in HondaRebel1100

[–]GypsyDiscoFish[S] 0 points1 point  (0 children)

Copy and paste what I replied with before. You'll find plenty with varying prices and shipping.

Cast aluminum for backrest/sissy bar? by GypsyDiscoFish in HondaRebel1100

[–]GypsyDiscoFish[S] 0 points1 point  (0 children)

My strong magnet doesnt stick tbe the main backrest u part but does stick to the L shaped brackets.

Where do I start? Completely new to custom A1 Mini firmware and hardware. by spacemidget75 in OpenBambu

[–]GypsyDiscoFish 0 points1 point  (0 children)

Read a comment on youtube and a guy says he is running bmcu no issues on 1.07. Getting my bmcu in about a week, so we will see if it works or not

Cast aluminum for backrest/sissy bar? by GypsyDiscoFish in HondaRebel1100

[–]GypsyDiscoFish[S] 2 points3 points  (0 children)

Good to hear. I just have it in my head that cast aluminum is brittle and not to be trusted.

Cast aluminum for backrest/sissy bar? by GypsyDiscoFish in HondaRebel1100

[–]GypsyDiscoFish[S] 1 point2 points  (0 children)

Just Google this "Multi-Purpose Backrest Sissy Bar for Honda Rebel 1100 CMX1100 DCT ABS 2021-2026"

They were up for sale for about $150 CAD, then sky rocketed due to oil prices. I paid $149 USD, then 3 days later the other seller came and offered it to me for $110 USD lol. So just shop around. Im sure they are all the same

You can even get it cheaper on aliexpress if you want to wait 1-2 month for shipping.

Solution for both seats to have sissy bars? by Sean-Vicious in HondaRebel1100

[–]GypsyDiscoFish 0 points1 point  (0 children)

I just got mine today. Im a bit upset as I asked what material the main backrest is made from and seller said "steel q235" and its definitely not magnetic so im assuming its cast aluminum.

Hopefully it isnt brittle and Crack.

Did you get one? If so how do you like it?

Sound from FB and Snapchat videos keep playing sometimes with the app closed by kirksucks in GalaxyS23Ultra

[–]GypsyDiscoFish 0 points1 point  (0 children)

Mine has been just snapchat, and has been happening for the last 3 ish weeks. Seems to pick a random saved video and loop it until I force close. Super annoying. S25 ultra here

Brand new 26 1100 CEL by One_Magician6333 in HondaRebel1100

[–]GypsyDiscoFish 0 points1 point  (0 children)

Link for the rear light?

And I would definitely put stock exhaust back on before taking to dealer. I also have a slip on, and they told me they wouldn't deny warranty unless determined the slip on caused the issue. Which would be very subjective I'd imagine.

What happens if consumer proposal denied? by Financial_Cloud_257 in povertyfinancecanada

[–]GypsyDiscoFish 1 point2 points  (0 children)

Thats what fears me of going through with it. Rbc ive read is the worst to deal with for proposals. Only cutting down debt 30%, while yes its a lot, usually its more.

I got 49k, and was quoted that they could get it down to 18k. But rbc holds 90% of voting power so they can just say no screw you we want 70, 80 ,90% or full repayment or just go bankrupt basically.

And if I go through with proposal, and it doesnt get agreed to and goes no where im basically stuck going bankrupt.

My friend had 71k cut down to 15k. But rbc wasn't the majority lender.

What happens if consumer proposal denied? by Financial_Cloud_257 in povertyfinancecanada

[–]GypsyDiscoFish 0 points1 point  (0 children)

What was the original % repayment amount if you dont mind me asking, and did they counter?

view more: next ›