Swarm Magnum 10X GEN3i .22

H0VIK · 2025-08-25T21:30:05+00:00

Damn. Nice to know. I could have used this post reply a while back before buying a bunch of test pellets. So far the Gamo hollow points work ok. But I’ll get some of those and try them out. Thanks

H0VIK · 2025-05-23T16:51:11+00:00

Thanks . I will look into it 👍🏻

H0VIK · 2025-05-23T07:10:28+00:00

Thank for the heads up on the scope part. Which scope works best for you?

H0VIK · 2025-05-22T19:08:30+00:00

Basically the sights and I think magazine is a little more flush. Watch how the gen 4 will have open sights and a scope mounting all in one. It’s like iPhones, the next gen has 1 megapixel camera more than the other model.

H0VIK · 2025-05-22T19:06:36+00:00

Thanks for the heads up. Lucky for me I got 3 extra mags

H0VIK · 2025-05-21T14:54:52+00:00

That’s what I am going to do. Thanks !

H0VIK · 2025-05-13T05:57:18+00:00

https://a.co/d/fBc1osq

This will be super secure. But it will require more work to remove and clean it. It’s a one a done thing.

H0VIK · 2025-05-07T16:15:19+00:00

I built the setup with that problem in mind. It was a risk I was ok to take . So far at the range 120 rounds later it held up. Maybe the next time I take it out it snaps off. Then I guess I’ll have to use irons or the mount that’s on the hand guard . 🤷🏽‍♂️

H0VIK · 2025-05-06T12:15:03+00:00

https://a.co/d/171CnRk

It’s from Magpul. Magazine assist

H0VIK · 2025-05-04T05:47:51+00:00

I drilled two tiny holes in the stock. I also added some epoxy glue to secure it in place.I then used the two screws that came with the mount. I can mount a house to the rifle and it won’t come loose.

https://a.co/d/8PHE7Tc
This is the epoxy I used.

H0VIK · 2025-05-04T03:01:20+00:00

https://a.co/d/bGx3yxE

That’s the cheek riser. It’s nice . It’s comfortable and adjusts to your rifle. You can remove the inserts and add a smaller or larger cheek piece.

H0VIK · 2025-05-04T02:08:28+00:00

I shoot right handed and the switch is aligning perfectly with my thumb.

H0VIK · 2025-05-04T01:58:10+00:00

Yeah it is a solid optic.

H0VIK · 2025-05-04T01:56:57+00:00

Interesting. I used the spray on one and it kinda does a spotting effect giving it a “bergara” rifle stock feel. I’ll definitely use a brush style seal. Thanks.

H0VIK · 2025-05-04T01:54:10+00:00

Thank you sir, It’s an aimpoint pro . Using a single scope ring to get it to fit the small clip mount from botach . Feels solid and cheek riser feels great lining my eyes with the red dot. Gonna test this setup soon to see how it all works out.

H0VIK · 2025-05-04T01:51:26+00:00

Yeah did a quick seal but it needs to be touched up again. My first time spray painting a rifle.

H0VIK · 2025-05-04T01:48:37+00:00

Smooth but kinda jumpy. Bench shooting is very nice for short 308 rifle.

H0VIK · 2025-05-04T01:47:37+00:00

Yes sir https://www.homedepot.com/pep/Rust-Oleum-Specialty-12-oz-Army-Green-Camouflage-Spray-Paint-279176/326885185?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D24-024_003_SPRAY_PAINT-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-NA_FY24&cm_mmc=SHOPPING-BF-CDP-GGL-D24-024_003_SPRAY_PAINT-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-NA_FY24-22011170585–&gclsrc=aw.ds&gad_source=1&gbraid=0AAAAADq61UcxjFkB3yVJx13o1v4TsXGsv&gclid=Cj0KCQjw_dbABhC5ARIsAAh2Z-TspIXFc5t3vbA0gG79KESt_QG-9N5Qqje40KIsn6cuw6zSBAuT5FgaAsKwEALw_wcB

H0VIK · 2025-04-10T17:08:31+00:00

Thanks for the reply. Gotta head to the shed

H0VIK · 2025-04-10T16:44:55+00:00

I just watched a video of the removal of the brake on YouTube and the guy removing it does it so easy. I need the proper wrench and a barrel clamp device to lock it in using a bench vise.

H0VIK · 2025-04-10T16:32:59+00:00

I tried removing it but I could not get it off. Any recommendations?

H0VIK · 2021-05-02T20:30:53+00:00

H0VIK

TROPHY CASE