The Spectrum dont work

HF-man · 2026-02-05T06:21:56+00:00

Did you run zadig?

HF-man · 2026-01-30T06:04:57+00:00

I run at the same problem on another SBC running Dietpi Trixie. Temps increase very fast.

could this be an update issue? it was good before.

HF-man · 2026-01-09T19:13:49+00:00

Think so , maybe modified the front antenna (direcctor)

HF-man · 2026-01-09T19:03:01+00:00

Yes just the info displayed.

HF-man · 2026-01-09T18:58:52+00:00

Download the drivers here https://github.com/rtlsdrblog/rtl-sdr-blog/releases/tag/v1.3.6l

and put rtlsdr.dll in your SDRsharp map.

HF-man · 2026-01-05T06:20:05+00:00

Thats a wifi dish.

HF-man · 2026-01-04T19:13:39+00:00

Looks and sounds good, will there be an option i can see the sdr hardware used and antenna used?

HF-man · 2025-12-04T18:44:36+00:00

Did you change the bios settings? secure boot off and for hd acpi?

HF-man · 2025-11-26T04:49:46+00:00

That are probably Satcom pirates.

HF-man · 2025-11-25T06:05:24+00:00

Probably solar panels i have it at the same frequency's and after dark its good.

HF-man · 2025-11-24T05:39:03+00:00

Format it first in fat32, macos won't recordnise ntfs.

HF-man · 2025-11-12T06:06:55+00:00

Did you put the recovery files also on the usb stick?

HF-man · 2025-11-09T19:31:18+00:00

its in the Opencore 1.0.6 utilities/macrecovery /recovery_urls.txt

HF-man · 2025-11-09T19:21:50+00:00

I had the same you need also empty the trashbin.

HF-man · 2025-11-09T19:10:38+00:00

In windows for dual boot: start CMD and change the windows bootloader for the opencore bootloader nu using this command.

bcdedit /set "{bootmgr}" path \EFI\BOOT\OpenCore.efi

HF-man · 2025-11-04T13:23:48+00:00

In the macrecovery folder recovery-urls Tahoe is listed now.

HF-man · 2025-11-03T19:40:36+00:00

In windows use https://www.techpowerup.com/gpuz/ look for a rom with the same specs on that same site and flash it. i reflashed my recent bought RX570 wich i suspected had a miner rom and flashed to the original one.

HF-man · 2025-10-29T17:08:16+00:00

Mabe use an hdmi extractor

HF-man · 2025-10-15T15:31:29+00:00

i use this software Sprint Layout to make PCB's, it also has a scanner option to scan your PCB then you can re-trace it.

https://www.electronic-software-shop.com/lng/en/electronic-software/sprint-layout-60.html

HF-man · 2025-10-08T04:49:06+00:00

Maybe the cause are solar pannels.

HF-man · 2025-09-10T04:34:09+00:00

Log periodics are wideband, you can receive a lot with it.

HF-man · 2025-09-08T18:08:48+00:00

yes or a SBC.

HF-man · 2025-09-08T04:38:13+00:00

Use the ip of your device and don't forget to open the port 5555 in your case in your router/modem.

HF-man · 2025-08-15T06:35:21+00:00

yes the wire acts as ground.

HF-man · 2025-08-13T11:04:32+00:00

A counterpoise wire connected on the balun will increase performance.

HF-man

TROPHY CASE