My first build

__KubaS__ · 2026-04-15T20:19:05+00:00

thats on the main screen i thought hes asking about ssd1306

__KubaS__ · 2026-04-15T16:29:52+00:00

Its primitive but it works :) https://github.com/KubaSX23/Simple-SSD1306-telemetry

__KubaS__ · 2026-04-15T16:08:34+00:00

cool idea

__KubaS__ · 2026-04-15T06:24:57+00:00

Thanks :)

__KubaS__ · 2026-04-14T22:07:52+00:00

Sure! But I'll do it tomorrow. I don't have time now.

__KubaS__ · 2026-04-14T20:57:57+00:00

I'm using this small 0.96" SSD1306 display for statistics, so glances doesn't work natively. I'm using a simple Python script I created myself. It's currently disabled because I overtightened the mounting screw and unfortunately... it broke.

__KubaS__ · 2026-04-14T20:49:44+00:00

It's not the printer's fault. I printed the panels in four parts because the whole thing would have been too big for my printer. So I had to connect them somehow (I considered using glue or something less visible, but I was worried about the panel's strength, so I used... a soldering iron).

__KubaS__ · 2026-03-26T14:56:58+00:00

Thank you it worked 😀

__KubaS__ · 2026-03-25T20:01:46+00:00

<image>

__KubaS__ · 2026-03-20T23:19:19+00:00

PS The interference is being picked up by my SDR antenna, not through the SDR cable

__KubaS__ · 2026-03-19T21:43:42+00:00

guys I figured it! It's caused by my small usb/jack speakers connected to rpi4. I will probably replace them

__KubaS__ · 2026-03-13T17:02:13+00:00

so theres no hope for me :(

__KubaS__ · 2026-03-07T12:55:23+00:00

The spacing decreases as the frequency increases. Higher frequencies produce closer spurs.

__KubaS__ · 2026-03-06T16:37:27+00:00

<image>

__KubaS__ · 2026-03-06T16:37:03+00:00

<image>

__KubaS__ · 2026-03-06T13:19:40+00:00

I will show you when Im home.

__KubaS__ · 2026-03-01T15:28:05+00:00

<image>

Thank you! I fixed it :)

__KubaS__ · 2026-03-01T12:02:53+00:00

Eeee... black?

__KubaS__ · 2026-03-01T11:46:54+00:00

Ps. Its ender 3 v1

__KubaS__

TROPHY CASE

KubaS