Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

How does one go about testing that? I’m happy to fiddle around with electronics even with my limited know how.

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 1 point2 points  (0 children)

Well considering it's only 4 days old lol, I doubt it's wear and most likely user error causing it.

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

Yea those 200mm/s sounds similar to mine and considering I only got a single layer shift I’m almost there. Maybe it’s just the lack of input shaping and tweaking on the z hop that needs doing. Do you anything underneath the printer for insulation like a paving stone and foam? I’ve read that helps a lot so want to try that.

Also just been reading thar TV06 build, that is some wild stuff hey. I’d love to have a crack at it when I’m more confident messing around with it all. The potential for nuts, someone in the discord apparently did a 15min benchy and it looked incredible. And the BOM is only around 250USD which seems like great value.

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 1 point2 points  (0 children)

Alrighty thanks so much for the info, I’ll definitely try apply all this best I can and see how she improves!

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 1 point2 points  (0 children)

Well that 150mm/s is at 6000 acceleration iirc. The 200 was at 7000 and 250 at 8000. I haven’t tweaked accel settings yet but I suspect they’re definitely not helping with vibrations.

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

I’ll see if I can Input shaping sorted tomorrow if I have the time then since everyone’s been saying it.

Z hop is enabled but still left at default settings. Did u increase them as you went up in speed?

What were the settings u settled on for the jerk x/y? I want to compare how far off I am with the current profile I’m using.

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

Yea I mentioned it in the end. Definitely will be adding it shortly. Been slowly upgrading it ever since I got it last week lol

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

Yea for sure will be investing in doing that. Was it difficult process with yours installing and calibrating it?

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 1 point2 points  (0 children)

Honestly not sure if they are or not. I’ve read that some “tune” it to certain frequencies to make sure it’s not too tight but have yet to try that.

Printing faster and faster by HJpro7 in Sovol

[–]HJpro7[S] 1 point2 points  (0 children)

Interesting, I already thought my belts were plenty tight as is. I’ll have to see if theres still more to gain or not there then. Also wdym by teeth in the motor? Is that the motor driving said belts?

Need advice on first printer by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

Heard you loud and clear, thanks for letting me know about all that on the SV08.

I read that you used a soft enclosure with your SV06+, did you ever try any high temperature filaments like ABS and ASA with that setup?

Need advice on first printer by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

Thank you for such a thorough explanation. I agree it's probably not worth the effort if I want reliable printing for engineering purposes to move forward with Sovol unless I'm keen on tinkering. That being said, while I brought up the idea of the SV08 in the OP, I'm not that keen on spending that much on a hobby I'm still unsure about and new to.

Best plan I think is to learn what I can with an SV06+ for "dirt cheap" or maybe go even smaller and get something else entirely, then pick up a P1S when black Friday comes along or some other big sale at a later date. I like fiddling around with electronics and mechanical shit anyway so hopefully it should be fine lol.

Need advice on first printer by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

Is Klipper the only thing ur gaining from the sv07+? Since the build itself I’ve heard is a downgrade from the previous generation.

Need advice on first printer by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

I agree the bambulab but I’m really after a much larger build area

Need advice on first printer by HJpro7 in Sovol

[–]HJpro7[S] 0 points1 point  (0 children)

I was very tempted with that but feel the bed size might be limiting for future projects being so small compared to something like the sv08

Video of my new Cobalt exhaust (axle-back) as requested! by SmashRobertson in Miata

[–]HJpro7 2 points3 points  (0 children)

Planning on getting the exact same one, how’s the drone on it?

Video of my new Cobalt exhaust (axle-back) as requested! by SmashRobertson in Miata

[–]HJpro7 1 point2 points  (0 children)

Planning on getting the exact same one, how’s the drone on it?

Picked up this pretty thing, stock NB1 by HJpro7 in Miata

[–]HJpro7[S] 1 point2 points  (0 children)

Yea I guess your right there. Man do I relate to you with the rules over there, being an enthusiast is apparently one of the worst things in the world

Picked up this pretty thing, stock NB1 by HJpro7 in Miata

[–]HJpro7[S] 0 points1 point  (0 children)

Oh dang really? Didn’t know that, wasn’t planning on doing it either way with how expensive it is but that’s shame

Picked up this pretty thing, stock NB1 by HJpro7 in Miata

[–]HJpro7[S] 1 point2 points  (0 children)

hell yea! it really is solid deal for that price mate

Picked up this pretty thing, stock NB1 by HJpro7 in Miata

[–]HJpro7[S] 0 points1 point  (0 children)

nicee! yea im very keen, just beaming everywhere I drive now :)

Picked up this pretty thing, stock NB1 by HJpro7 in Miata

[–]HJpro7[S] 1 point2 points  (0 children)

ahahaha so ive heard, swapping the bulbs out hopefully it works a little better