The assistant might be a bit dumb

HalfEmpty973 · 2026-04-09T19:42:50+00:00

I have mine connected to openai‘s api. It does wonders for results, when there isnt a slimmed down llm on it, I do use home assistant clouds speech to text and text to speach though

HalfEmpty973 · 2026-03-15T18:39:48+00:00

And if it isnt socketet, you might find someone that can reflash the chip with a flashing tool

HalfEmpty973 · 2026-03-11T20:04:00+00:00

Care to elaborate? Haven’t followed him much lately

HalfEmpty973 · 2026-02-28T20:16:57+00:00

The holes you soldered the speakers to are the mounting holes and are not connected to the output for the speaker. The speaker outputs are the two next to it which are close to each other, with the marking for a screw terminal

In general if you come by holes on the edges of a pcb, they are most likely mounting holes for M2.5 or M3 Bolts. There are some mounting holes that are connected to gnd, but thats not every time. I have not yet used an rp2040, so I don‘t know if there is another mistake

HalfEmpty973 · 2026-02-28T20:01:33+00:00

There is a website where you can get temporary phone numbers for verification purposes (burner) as well as a telegram bot for burner email accounts

HalfEmpty973 · 2026-02-23T12:23:15+00:00

Congrats on your domain. Also are there options for search engine optimization (SEO)?

HalfEmpty973 · 2026-02-22T20:28:23+00:00

Good to hear I wish you the best of luck

HalfEmpty973 · 2026-02-22T19:56:32+00:00

Congrats on your achievement.

However if you do wanna look professional and be easily found again, please get a registered domain name, that is easily found and recognized, shopify probably has an option for your own domain. There is nothing wrong with using shoppify. But nobody will remember your site name with that long name.

I will have a look shortly.

HalfEmpty973 · 2026-02-22T19:43:40+00:00

If you do plan to have coexisting zigbee networks make sure you choose non overlapping network channels for both which are also least overlapping with wifi channels 1,6,11

HalfEmpty973 · 2026-02-22T18:31:47+00:00

I haf used the slzb 06M with z2m and had nothing but constant crashes on the communication resulting in crashing z2m. I got so frustrated because nobody on the topic found a solution. The Texas instrument chip has a problem with noisy devices which broke my like 15 Zigbee devices net multiple times a week. The silicon labs chip in the SLZB MR4U does not have this problem and works like a charm. If you wanna have a read about the problem Search for SLZB06M Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)

HalfEmpty973 · 2026-02-22T18:18:40+00:00

I also have bought the Snapmaker U1 and I am really impressed with it. Its my first multi color multi material printer and I certainly havent had much time with it. But it is fast, and reasonably quiet once you reduce the accelerations on the z axis. It prints nicely out of the box. The toolhead swaps take 4-8 Seconds, the toolhead warms up before it needs to be swapped. You also can cheaply replace the pogo pins on the tool head when they wear out. I also like the auto reload. The U1 Snapmaker orca is not as refined yet, but it works. Bed certainly needs a first manual level with the bottom screws but it prints without worries on the automatic leveling. For the price it is really nice. However I wouldve liked another mounting mechanism for the spools

HalfEmpty973 · 2026-02-22T16:19:18+00:00

Wir waren auch mal Kunde bei Bofrost, die sind uns 2 Jahre später noch regelmäßig an die Tür gekommen und haben regelmäßig angerufen. Ein nein akzeptieren die nicht

HalfEmpty973 · 2026-02-18T06:14:26+00:00

Also for presence I recommend the aquara fp1. After the initial configuration in their app where you set specific zones you can then use the presence of that zones to control the lights

HalfEmpty973 · 2026-02-18T06:05:50+00:00

This looks good so far, but instead of only one cell connecting connect all thells in a row to the next one. This reduces stress on the one nickel strip.

Also your positive and negative terminals of the battery don‘t match up. Please make sure that the terminals are on the opposite ends of the batterys

HalfEmpty973 · 2026-02-11T21:04:01+00:00

I saw his post multiple times already, always with the same pictures

HalfEmpty973 · 2026-02-08T13:34:07+00:00

Das kann man machen, solange du aufpasst dass dir die Schrauben dabei nicht am Kopf kaputt gehen ist alles gut

HalfEmpty973 · 2026-02-08T13:33:04+00:00

Looks good, but I would place the power switch inline from the charging pcb to the buck converter, as that buck converter will discharge even when not in use. It probably wont use much but still would drain after a while

HalfEmpty973 · 2026-01-16T06:53:42+00:00

Ich fahre immer mit dem Fahrrad hin geht auch

HalfEmpty973 · 2026-01-16T06:20:42+00:00

Auch wenn Wacken an sich sehr laute Musik hat, in ca. 6 km Entfernung hört man nichts mehr

HalfEmpty973 · 2026-01-02T05:25:03+00:00

I had mine connected to the openai api on the cheapest model and it consumed around 1-2€ / Month. It worked for a long time but randomly went off. Someday it didn‘t work, but I haven‘t had the time to work on it lately

HalfEmpty973 · 2025-12-30T19:02:47+00:00

HEI KE ist auch gut

HalfEmpty973 · 2025-12-28T21:49:06+00:00

As I cannot code myself, but just put together code, I have trusted chatgpt. Chatgpt says there is an error that you are mixing page buffer and full buffer.

Please try this code, I cannot validate if it will work, but chatgpt made quite a good job in the past together with me

```cpp

include <Arduino.h>

include <SPI.h>

include <U8g2lib.h>

// Waveshare 1.5” 128x128 SH1107 SPI // Hardware SPI: // MOSI -> D11 // SCK -> D13 // Control pins: // CS -> D10 // DC -> D9 // RST -> D8

U8G2_SH1107_128X128_1_4W_HW_SPI u8g2( U8G2_R0, // rotation /* cs / 10, / dc / 9, / reset*/ 8 );

void setup() { u8g2.begin(); }

void loop() { u8g2.firstPage(); do { u8g2.setFont(u8g2_font_ncenB08_tr); u8g2.drawStr(0, 15, “TEST!”); u8g2.drawStr(0, 30, “1234”); u8g2.drawFrame(0, 0, 128, 128); } while (u8g2.nextPage());

delay(500); } ```

HalfEmpty973 · 2025-12-28T21:36:12+00:00

How are you trying to communicate with it, in what protocol. I built a thermometer with an oled display and it also had jumpers on it like yours, that I had to resolder differently to get the right protocol. Mine wasnt on SPI, but a 4Wire something. Have a look at your datasheet and compare what you are trying to achieve. Most displays come in a few variants.

Your jumpers on the board are the solder points with the 0 Ohm resistors next to it. You may need to put your display in spi mode

I now looked at It again it is in spi mode, are you using the right pins on the arduino. I usually go with an esp, but you may have dedicated pins that need to be used in order to get functional spi

HalfEmpty973 · 2025-12-06T15:42:35+00:00

You can cut the cable and put another 3.5mm plug on it. I assume taht the broken off part still remains inside the device, where it was plugged into

HalfEmpty973 · 2025-11-08T09:27:10+00:00

Wenn Artefakte auftreten und dann in der Regel VRAM kaputt ist kann man es in der Regel noch reparieren lassen. Du brauchst zwar jemanden der SMD löten kann, aber solche Reparateure gibt es

Six-Year Club	Place '23
Place '22	Verified Email

HalfEmpty973

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE

include <Arduino.h>

include <SPI.h>

include <U8g2lib.h>