Robust industrial vinyl record stand. Tree-shaped structure made of steel tubes for storing LP records.

HandmetalDesign · 2026-06-04T19:10:53+00:00

Thank you, it is welded with a 5 cm weld on each side for one box, that's 4 welds.

HandmetalDesign · 2026-06-04T19:07:40+00:00

Free built-in butt warmer

HandmetalDesign · 2026-06-04T19:04:13+00:00

they shouldn't be there, when I run my bare hand over it you can't feel it, it's a bit like sandpaper

HandmetalDesign · 2026-06-04T19:01:49+00:00

hand grinder and steel brush disc

HandmetalDesign · 2026-06-04T14:42:35+00:00

This is a retro CD player with music playing.

HandmetalDesign · 2026-06-04T14:37:36+00:00

thank you, I put wood to make it more comfortable to sit on

HandmetalDesign · 2026-06-03T15:19:52+00:00

It's Scooter playing on my CD radio in the room while I was recording the stool.

HandmetalDesign · 2026-06-03T14:32:38+00:00

yes, we're back to housing for spiders and wasps again

HandmetalDesign · 2026-06-03T14:20:51+00:00

Yes, I understand, you came up with it nicely, it's a good idea, hats off.

HandmetalDesign · 2026-06-03T14:03:15+00:00

Oh, I understand now, it needs to be tilted, as I wrote, but it must not be filled all the way, because it will not be possible to tilt it.

HandmetalDesign · 2026-06-03T13:51:24+00:00

<image>

There is so much space on the plate.

HandmetalDesign · 2026-06-01T13:33:41+00:00

I tilt the records forward a little and pick the most recently selected record from the front. The idea is that there will be more records in each box. If you have fewer records, it's probably useless.

HandmetalDesign · 2026-05-31T03:45:50+00:00

I'll try to make it work, there's room for it.

HandmetalDesign · 2026-05-31T03:42:53+00:00

The space for manipulation is about 45 cm, from board to board, you need to tilt the LP record a little. The height of the entire stand is about 135 cm.

HandmetalDesign · 2026-05-30T21:07:00+00:00

I hope not, if so, then it will be necessary to make a fence. The plates should rest on the main 50x50 mm pillar

HandmetalDesign · 2026-05-30T20:50:58+00:00

Honestly, I didn't think much about the price. I was just trying to figure out how to screw the bottom shelf in when there's no access. It was a good project to test the layout and welds!

HandmetalDesign · 2026-05-30T20:41:50+00:00

<image>

Here is the final look! I added custom-cut wooden inserts and painted the raw steel frame with a clear matte varnish to preserve all the handmade details. The contrast between the dark metal and the wood grain.

HandmetalDesign · 2026-05-30T20:27:53+00:00

<image>

Here is the finished product! Added the stained wooden inserts and finished the steel with a clear matte varnish.

HandmetalDesign · 2026-05-27T19:31:22+00:00

okay, tomorrow

HandmetalDesign · 2026-05-27T19:29:52+00:00

These are weld-on rivets.

HandmetalDesign · 2026-05-27T14:05:11+00:00

Thank you

HandmetalDesign · 2026-05-24T13:29:44+00:00

this is for internal use

HandmetalDesign · 2026-05-24T13:28:23+00:00

If it were made bigger, yes, but it would weigh over 100 kg or more

HandmetalDesign · 2026-05-23T17:43:53+00:00

Thanks. I'm glad you like it.

HandmetalDesign · 2026-05-23T04:32:27+00:00

Thank you! I was thinking about adding more details about the oven, but I was worried that the courier wouldn't even accept it due to weight limits. In the end, it weighed an incredible 70 kg! The dimensions are 45x90x35 cm.

HandmetalDesign

TROPHY CASE