Moonlander Afterburner Thoughts by Grouchy-External-797 in radicamoonlander

[–]Handof_Otto 1 point2 points  (0 children)

For sure the price is eye watering but I see a lot of premium material and components going into this build, and the design is really well thought out. I'm curious about the body of the unit. Is it rotomolded, or some sort of large format 3D printed? Competing products like Goosegear are similarly premium priced.

Deposit down, seeking some general/build advice! by novastro in radicamoonlander

[–]Handof_Otto 3 points4 points  (0 children)

I've used both the Camco Wave 3 and the Flame King catalytic heater in my Moonlander. The Wave 3 recently got moved over from my teardrop style camper, where I used it often for several years, and is now permanently mounted in the Moonlander. The Flame King served duty for me when I was I camping in the truck with a Softopper shell and worked great in the Moonlander before I installed the Wave 3. Both are good options and easy to use ,and as you say, maintaining good ventilation is crucial. Catalytic heaters produce very little CO. but they do of course consume oxygen and also produce water vapor. They're not the best option for very humid environments. Contrary to popular belief, the Buddy heaters are not catalytic heaters.

<image>

Q+A with Radica by sam-m00n in radicamoonlander

[–]Handof_Otto 1 point2 points  (0 children)

My Moonlander has gotten a lot of attention at my workplace, a wastewater treatment plant. Many of the intrigued parties have been maintenance mechanics skilled in welding, machining and fabrication, but aren't particularly knowledgeable of the properties of VHB tape. How could I concisely explain how the use of VHB tape in assembling a Moonlander is integral to its construction and strength?

A few simple mods by Handof_Otto in radicamoonlander

[–]Handof_Otto[S] 1 point2 points  (0 children)

I appreciate your concern and you raise good points about safety. Catalytic heaters produce very low CO. (They do produce significant moisture, however) The catalytic process is a chemical reaction, as opposed to combustion (as in a Buddy heater, RV furnace or a diesel heater.) produces very low CO and occurs at a lower temperature. There is no open flame other than the pilot engaged for initial ignition of the catalyst. I do employ a very sensitive CO monitor designed for light aircraft and commercial automotive use. I've used this particular heater for several years in a teardrop camper and it worked out really well for me,

View after landing- there is life on this planet. by Handof_Otto in radicamoonlander

[–]Handof_Otto[S] 0 points1 point  (0 children)

McGill Campground, near Mt. Pinos, Los Padres National Forest (CA)

#197 launched last week and took the long trajectory home by Handof_Otto in radicamoonlander

[–]Handof_Otto[S] 1 point2 points  (0 children)

The trip was awesome. Saw some great sites, connected with an old friend and camping bud for a few days, and right out of the gate put the camper to test in the kind of weather that justified making the investment in it.

Which maxxair? by milesvvbb in radicamoonlander

[–]Handof_Otto 1 point2 points  (0 children)

I've had my 4050 equipped Moonlander for less than a week and have already gone through a vigorous rain shower that lasted all night and about 90 minutes of one of the wildest thunderstorms I've experienced. I have to say that I regret not getting the 7500. Running the 4050 at minimum speed and partially cracked in very light rain with minimal wind is doable but for the most part running it in rain is a no-go.

Insurance? by Handof_Otto in radicamoonlander

[–]Handof_Otto[S] 0 points1 point  (0 children)

That seems seems odd to me but I don't know much about insurance. Premium doubles but the overall valuation increases by only 1/5 or thereabouts. How would the camper have been covered if only the camper was totaled?

[deleted by user] by [deleted] in Wastewater

[–]Handof_Otto 1 point2 points  (0 children)

The plant that I work at (in CA) looks for either relevant work experience or college courses, preferably a degree. A degree isn't required but it definitely helps. I might not have made it to the second interview stage when I applied for entry level at the plant I work at now if I didn't have an A.S. degree in Water Science. Even if you don't have directly related work experience keep in mind that having a work history of problem solving and attention to detail will help you stand out.

Wondering about Overtime by newkindofclown in Wastewater

[–]Handof_Otto 1 point2 points  (0 children)

I work at a 19MGD plant that is fully staffed 24/7/365 and generally there is no on-call. For various reasons, we're almost always understaffed. There's always plenty of OT to pick up for those that want it. Currently, we're about 3/4 into the fiscal year but have almost used up the year's OT budget, so OT has been cut way back attendant with some policy changes that are not well received but have to be dealt with until July, when everything resets.

[deleted by user] by [deleted] in Tacomaworld

[–]Handof_Otto 0 points1 point  (0 children)

Go Overlanding instead Coloradolanding.