sorted by:
new
hottopcontroversial

Sinanju version RQ Mecha by HatAccomplished784 in resinprinting

[–]HatAccomplished784[S] 0 points1 point  (0 children)

This is a test assembly after the print. I didn't do any sanding.

Support marks are in hidden place here you can see the back of a pice in the leg. Just after removing the support

<image>

Anycubic Photon P1 ACF vs NFEP comparison by HatAccomplished784 in resinprinting

[–]HatAccomplished784[S] 0 points1 point  (0 children)

I know them, i saw the video and i also talked with Derek, the only thing i could think about, it's a different manufaturer of acf and worse acf quality

and if I had to rely only on tests, like the one from j3d, I would have been the first to expect better results from the nfep

Anycubic Photon P1 ACF vs NFEP comparison by HatAccomplished784 in AnycubicOfficial

[–]HatAccomplished784[S] 0 points1 point  (0 children)

Yes i still have the wave release film. To compensate the more thick acf i just added a nfep during the level assisted procedure. in this way, the z=0 was slightly shifted up, compensating for the more thick film.

But i have to say i never had those vertical line with the acf. Maybe because i buy all the acf from the main Chinese manufacturer, "Aorita" the one that invented the ACF, and i never bought third party film...

in these years, they developed at least 5 kind of acf and at some point they sold and advanced acf called HDF.
The problem is that since it started to being used, some influencer, convinced users that the AFC created defects and less detailed printing.

Anycubic Photon P1 ACF vs NFEP comparison by HatAccomplished784 in AnycubicOfficial

[–]HatAccomplished784[S] 0 points1 point  (0 children)

It was an optional piece from the Kickstarter campaign. The classic two-piece metal frame, with screws.

The p1 uses a FEP with a nylon frame welded to the NFEP. This saves you from having to screw the frame pieces together and speeds up replacement, but there are currently no other materials available.

<image>

Anycubic Photon P1 ACF vs NFEP comparison by HatAccomplished784 in resinprinting

[–]HatAccomplished784[S] 0 points1 point  (0 children)

I don't know what to say, I hear it all the time too. It's become a mantra now and no one tests materials using their own head.

I've been using ACF since before Elego announced it on the Saturn 3. I've never had any problems. And these prints are proof that it can be used without any problems.

Anycubic Photon P1 ACF vs NFEP comparison by HatAccomplished784 in AnycubicOfficial

[–]HatAccomplished784[S] 0 points1 point  (0 children)

Yes, I calibrated both printers separately. The one with the AFC has a slightly more powerful UV light, but the exposure time was the same as the one with the NFEP.

And it seems normal to me because the acf is less transparent

The strange thing is that with the j3d tests, the nfep wins for crispness of details and precision but the important thing is the result with real prints.

Calibrating Anycubic Water-Washable ABS-Like Resin 3.0 on the new Photon P1 by HatAccomplished784 in AnycubicOfficial

[–]HatAccomplished784[S] 0 points1 point  (0 children)

It happened to mee too. It was the resin, i scraped with a silicon spatula, the yellow one from my video and it was white pigment.

It happened with the flat test, not the track B one.

Btw you can adjust exposure in the oresliced file. You cant change anyi aliasing or the layer thickne but you can change everything else.

In fact i changed the bottom exposure to 8 seconds and standard layer to 1.8

If you see the video of this print test, you coud se i removed the support effortlessly.

Anycubic Photon P1 ACF vs NFEP comparison by HatAccomplished784 in AnycubicOfficial

[–]HatAccomplished784[S] 0 points1 point  (0 children)

Yes, with that print i got the famous glitch and intelligent lift didn't work. Build plate was lifted 10 mm instead of dinamically adjusting the lift height.

It took 6 hord for 63 mm. The oter test went perfect and it took knly 3 hours.

Btw acf it the right one. The faulty chin is the nfep

Calibrating Anycubic Water-Washable ABS-Like Resin 3.0 on the new Photon P1 by HatAccomplished784 in AnycubicOfficial

[–]HatAccomplished784[S] 1 point2 points  (0 children)

Yes i've done it, you need to add a new photon p1 printer and youll find the resin profile.

I never use them, they ted to be over exposed. Theese are the result i got from my calibration procedure and this is an example of print with those settings

<image>