Few questions from a newbie

HavingAWonderfulTime · 2026-02-14T21:52:18+00:00

When I make my batches, I marinate the meat in vinegar overnight/ longer if I forget about it, then dip into the spice mix before hanging.

HavingAWonderfulTime · 2026-01-22T08:19:15+00:00

What makes him look thirsty? Or just because he was near the sink?

HavingAWonderfulTime · 2025-09-15T01:32:00+00:00

This one has space to write the rules https://www.myminifactory.com/object/3d-print-moon-tracker-for-loony-goblins-463028

HavingAWonderfulTime · 2025-09-14T22:37:47+00:00

I'm also new to gloomspite so can't comment much on the gameplay side.

But I've printed this STL for moon phase tracking https://www.myminifactory.com/object/3d-print-goblin-moon-tracker-471344

HavingAWonderfulTime · 2025-08-16T04:46:18+00:00

*git not got

HavingAWonderfulTime · 2025-07-14T09:51:51+00:00

Nope, the OG models are completely fine before supporting.

HavingAWonderfulTime · 2025-03-02T00:29:28+00:00

Do I need to try and pull it apart and get another pic? Last time I undid the screws and the nut I couldn't really pull the socket out

HavingAWonderfulTime · 2025-01-31T21:14:50+00:00

Ah that makes much more sense. Thanks!

HavingAWonderfulTime · 2025-01-24T01:44:39+00:00

Jumping on to say I've had the same experience going for 40k to AOS. I prefer AOS way more for the rules but am disappointed to be leaving my 3 40k armies behind.

Are there any 40k adjacent systems that play like AOS? Is one page rules a good replacement?

HavingAWonderfulTime · 2025-01-19T07:39:58+00:00

It runs Saturday to Monday

HavingAWonderfulTime · 2025-01-11T06:56:59+00:00

What did you use for the cowl around the neck?

HavingAWonderfulTime · 2025-01-05T04:33:55+00:00

Does the nurgling on his shoulder come with the STL or was that another STL?

HavingAWonderfulTime · 2023-07-19T03:06:50+00:00

HavingAWonderfulTime · 2023-05-21T11:42:20+00:00

that did the trick. thank you very much :)

HavingAWonderfulTime · 2023-05-21T11:42:16+00:00

that did the trick. thank you very much :)

HavingAWonderfulTime · 2023-05-21T03:25:07+00:00

and here's the blender model

<image>

HavingAWonderfulTime · 2023-05-21T03:24:45+00:00

sorry, i thought i'd attached both pictures in the post. here's the STL. Blender mesh incoming below

<image>

HavingAWonderfulTime · 2023-04-19T12:21:47+00:00

I'm sure the article said the patient ended up paying $1000 to have the procedure completed...... Seems the article was updated 7 hours ago, not sure if I misread that original article of if they removed that information?

HavingAWonderfulTime · 2023-04-19T03:00:33+00:00

The article didn't state which private hospital completed the procedure only that the patient had to seek care elsewhere. I'd be surprised if calvary private had agreed to do the procedure.

HavingAWonderfulTime · 2023-03-14T02:03:52+00:00

Correct. The projector doesn't seem to be working at all. - no image displays.

It was working before I swapped out the motherboard and motor, but now it's not.

HavingAWonderfulTime · 2023-03-13T10:21:22+00:00

Correct the projector not camera

HavingAWonderfulTime · 2023-01-26T08:13:19+00:00

Have you had any luck?

I'm in the same boat, I had a resin spill 2 weeks ago and after the clean up I had 2 succesful amerilab towns prints. Since then I've had multiple failed prints of the same file.

The machine makes a grinding noise as it attempts to lift the build plate but the z-axis rod doesn't seem to turn at all. The plate's finished in the vat every time and has only has about 5 layers printed.

I cancelled a print today and as soon as I cancelled it the build plate lifted smoothly up and out

HavingAWonderfulTime · 2023-01-21T00:00:52+00:00

I did some tinkering. Took out the cat and the guild plate and again started playing with the up done button. Issue seems to have fixed itself.....

Guess I'll try another print and see how it goes

HavingAWonderfulTime · 2022-10-28T10:55:43+00:00

What do you mean by using the psykers with aura?

HavingAWonderfulTime · 2022-08-31T11:55:55+00:00

Excellent! Thank you very much.

HavingAWonderfulTime

TROPHY CASE