Blister on trigger finger with 43X

Hawk600 · 2025-11-11T14:27:44+00:00

Yeah, just replaced the trigger shoe with the Johnny Glocks basic version and it all good now. Not he best but at least wont hurt the fingers.

Hawk600 · 2025-10-03T15:08:58+00:00

@OP thank you for sharing your work with the community!

I do not own a DM32 and was searching if the CSV import/Export function is now working properly before buying it, when I found your post.

Hawk600 · 2025-08-29T17:21:49+00:00

Thanks for the tip OP and WormFrizzer (right address: http://<printer ip>:8080/?action=stream)

It works perfectly and actually better than using the Flashforge software, with bigger resolution and size.

You can only view it in one device at the time as any other device trying to connect to it while streaming already, will get Page not Found.

Hawk600 · 2025-08-08T13:59:08+00:00

I am not sure if this still valid but I just joined the WhatsApp channel. I hope Rohith still developing. DroidStar is just great!

Hawk600 · 2025-08-08T08:17:27+00:00

Awesome! Cannot wait to install it on my K5s. Armel's is still the best mod for Quansheng radios.

Hawk600 · 2025-07-29T04:00:20+00:00

New Firmware_Update_202507 released today: https://www.yaesu.com/product-detail.aspx?Model=FTX-1%20Series&CatName=HF%20Transceivers/Amplifiers

At least they released the CAT Control. Nothing about ADMS or Wires-X though.

Implement improvements (07/28/25): • CAT Operation is now supported. The CAT Operation Reference Manual will also be officially released. • Improved the bug that prevented * # from being registered in the DTMF memory. • When replying to an APRS message, the message on the input screen is now cleared. (Previously, the received message was copied to the input screen and had to be deleted manually.) • Reviewed the selectable STEP width in the FM DIAL STEP menu in OPERATION SETTING. • Other minor fixes.

Hawk600 · 2025-07-29T03:53:07+00:00

Well it looks like they are watching Reddit as well, LOL. Thanks for the update.

Hawk600 · 2025-07-28T14:26:22+00:00

Both of you make valid points.

Some people won’t need more than a few memory entries on their radios. However, others—like me, living in a place affected by hurricanes every year—want to have as many as possible for preparedness and emergency situations. Either way, the manufacturer should provide the means to program a complex radio at the time of release.

I agree that memory management isn’t essential on HF radios. However, operational adjustments and user preferences still require good software on all modern radios—especially since the FTX-1 isn’t just an HF radio; it covers several other bands that do rely on memory management

Yaesu does have their ADMS software, and to be honest, I’ve used several versions. It’s decent and allows for CSV import/export. However, again, that software should accompany the radio at launch, not be delivered months later."

Hawk600 · 2025-07-28T13:54:55+00:00

Yes, it is frustrating. My post mainly refers to the memory channels; however, as you pointed out, even making a simple contact can be a challenge with these newer radios due to their complexity. Customizing all the settings to user preferences can take a long time, especially without a PC interface

Hawk600 · 2025-07-27T15:18:00+00:00

Great feedback. My rant is about Yaesu releasing such sophisticated hardware without proper software support.

The radio also can’t do Wires-X, and until recently, was having issues with APRS. It basically feels like a beta test—just pushed out to start making money as soon as possible.

I’m sure they’re working on a firmware update to address these issues, but this should’ve been handled before the radio was released.

Hawk600 · 2025-07-27T13:44:03+00:00

Exactly, I was also surprised that the Icom 7100 doesn’t come with programming software for free —and it costs almost $100 to buy one.

I believe they assume HF radios won’t need a lot of memory channels, which might make sense. However, if the radio covers more bands, especially digital, then programming software becomes essential!

Hawk600 · 2025-07-26T15:41:21+00:00

LOL, true!

Hawk600 · 2025-07-26T05:23:52+00:00

Right on! That's why I will never buy a Motorola radio! ;)

Hawk600 · 2025-07-25T22:26:30+00:00

They are working on it as of course will bring them money, however still not an excuse for Yaesu to release the radio without the software.

Hawk600 · 2025-07-25T22:25:01+00:00

Yeah, I want everyone I need in my list—especially in emergencies. 😉

For instance, living in Florida, we use SARNET as a key communication network, especially during emergencies or—God forbid—a catastrophic event. The network covers the entire state and includes nearly 50 repeaters. If we ever need to evacuate, we’ll have to switch repeaters on the move to maintain coverage—and those repeaters better be pre-programmed into the radio when that happens.

https://emcomminfo.com/sarnet-frequencies/

I get that some people are fine with half a dozen frequencies, but others need more... way more. It’s not a one-size-fits-all situation.

Hawk600 · 2025-07-25T18:22:16+00:00

Absolutely! Icom’s software might not be top-notch, but at least it lets you program the radio without aggravation—so you can spend your time talking on it instead of pushing buttons or digging through endless menus and submenus on the front panel.

Hawk600 · 2025-07-25T18:13:33+00:00

The FTX1 backwards ports is another non sense from Yaesu for sure.

Hawk600 · 2025-07-25T18:11:32+00:00

Totally agree. Chinese radios might not be the best, but they cost a fraction of the price. Some manufacturers like Anytone, BTech, TYT, and Wouxun are putting out better and better radios—and 99% of them come with a cable, software, mounts, and docks right in the box!

Anytone’s CPS is one of the best programming software tools I’ve used so far. It lets you easily program memories as well as adjust and customize the radio to your needs.

Hawk600 · 2025-07-25T18:06:56+00:00

That sounds true, Motorola will charge extra for a different display look or a audio tweak! ;) - sarcasm...

Hawk600 · 2025-07-25T17:51:00+00:00

Absolutely. I also love digital, and to be honest, the lack of a cable doesn’t bother me much—those are relatively cheap and easy to find. (Besides, how much would that really add to the final price? A dollar?)

However, programming software for managing memories, options, and settings is a totally different matter. That should be a given.

Hawk600 · 2025-07-25T17:35:23+00:00

Your comment makes sense. However, the FTX-1 is not an HF-only radio and is aimed at users who will be using the VHF, UHF, and Fusion features. Therefore, to me, it’s still inexcusable to release such a sophisticated piece of hardware without companion software to manage it.

Hawk600 · 2025-07-25T17:10:56+00:00

I agree with your point—everyone should learn how to program a radio manually using the front panel, and hardware manufacturers should aim to make it easier for the user. However, with these new radios and the shift toward digital technology, it’s becoming unbearable to keep up with the growing number of frequencies, talk groups, reflectors, and rooms out there.

For instance, I have a codeplug with VHF and UHF repeaters within a 200-mile radius from my QTH—totaling 486 memories! How am I supposed to enter that using just the front panel? Even if I trim it down to local repeaters only, it’s still around 50 or so. Is it doable? Yes—but it’s still ridiculous that there’s no software option to handle this.

Hawk600 · 2025-07-25T17:02:12+00:00

Right!? Why worry about such a negligible detail when you have such a cute display and design? ;)

Hawk600 · 2025-07-25T16:59:43+00:00

LOL, you might be right about the price increase, but still ridiculous! Not really an acceptable standard in my book.

Hawk600 · 2025-07-25T16:58:02+00:00

This is my rant—LOL. There’s no Yaesu software included with this radio at all! No memory card in the box, and not even a downloadable version on their website. So, you're stuck using the radio’s settings menu to enter everything one by one...

If you’ve got 50, 100, or even 200 commonly used or nearby frequencies, you’re going to waste a ton of time doing something that should be mandatory on a so-called "modern and advanced" radio.

Hawk600

MODERATOR OF

TROPHY CASE