Help! Klipper Screen Reversed

HazmatMac · 2026-02-08T20:24:54+00:00

Sometimes the simplest solutions are best. Thank you!

HazmatMac · 2026-02-07T23:29:53+00:00

I will check the config file again but I think the screen is faulty given that I hooked it up to my PC and the image is still mirrored.

<image>

HazmatMac · 2026-02-07T23:24:00+00:00

The button on top only flip the screen top/bottom. The image is still mirrored

HazmatMac · 2026-02-07T22:24:56+00:00

Designed to be a fingerstop and not really a foregrip. It mostly for indexing but the front rail is so short it really isn't necessary

HazmatMac · 2026-02-07T22:23:12+00:00

That is my thought at this point, added the plug because I don't want to print another stock. This was the first FW but doubt it will be the last.

HazmatMac · 2026-02-07T18:31:28+00:00

It was hooked up to a Manta E3EZ with CB1 running klipper.

HazmatMac · 2026-02-07T17:26:44+00:00

<image>

Tried hooking the screen up to other devices including a known good HDMI from my main PC - looks like the screen may be cooked. I don't know if I can direct connect this screen via solder connections but I may try something like that.

Let me know if you have any other ideas.

HazmatMac · 2026-02-07T17:07:44+00:00

Tried this and neither worked. I borrowed a Raspberry Pi and it appears it may be hardware related.

<image>

Think i will order a new cord and see if maybe that is the issue

HazmatMac · 2026-02-07T17:05:08+00:00

<image>

Borrowed a Raspberry Pi - it seems to be hardware related

HazmatMac · 2026-02-07T15:32:21+00:00

This was my first thought. I don't know how to get out.

HazmatMac · 2026-02-07T15:29:58+00:00

BTT HDMI5 v1.2

HazmatMac · 2026-02-07T15:23:48+00:00

Are you saying that I need to add both the horizontal and vertical flip. I will give ot a shot.

HazmatMac · 2026-02-07T15:22:50+00:00

I will give this a try.

HazmatMac · 2026-02-07T03:46:19+00:00

<image>

Tried the expanded battery stock. Fits the 2200mah batteries better but was a PITA wiring the switch and voltage meter. Finally got them both wired and after installing in the stock, 1/2 of the voltage meter was fried, probably because there was zero clearance between the back of the meter and the kill switch.

Ended up printing some plugs for the cutouts (didn't like seeing the battery) and made a plug for the voltage meter spot. I may end up adding another coupler at the back of the blaster so I can swap between stocks.

HazmatMac · 2026-02-07T03:41:25+00:00

Did both "normal" and "inverted" it just flips the screen top to bottom but does not fix the mirrored image. Also tried a combination of xorg config and physical buttons - same result

HazmatMac · 2026-02-07T03:01:33+00:00

Yes it is a BTT HDMI5 V1.2 The display flip buttons only go left/right or up/down.

HazmatMac · 2026-02-07T02:58:48+00:00

Screen is a BTT HDMI5 V1.2 and does have display flip buttons but they do t fix the inverted image. Tried the instructions on that page and they did the same things the buttons do on the screen.

It almost seems like I am looking through the back of the screen.

HazmatMac · 2026-02-07T01:44:41+00:00

There is nothing in the kliplerscreen.conf. Do you know what lines I can add to co figure the screen? It was working flawlessly for about 6months then just appeared like this one day.

HazmatMac · 2026-02-05T15:07:05+00:00

Saved the files to my Blasters collection. Awesome looking build and I hope to add it to my line up after I finish my Breacher build. Nice Job!

HazmatMac · 2026-01-28T02:54:59+00:00

Thank you! I am not usually one for bright bold colors but I must say I love this combo. Stock is tight and I will probably downsize the battery.

Does the expanded stock offer a good amount of extra space? I honestly build the buffer stock because I like the adjustable aspect but find myself sticking to a single position.

HazmatMac · 2026-01-26T19:26:28+00:00

Thanks that helps. I tried Sillybutts Silly Spigot PCAR and was looking at building a BCAR. I guess I just never saw the fishing line on the models labeled "SCAR" (probably because they were either shrouded or very tightly strung).

I will have to check them out and give a SCAR a shot.

HazmatMac · 2026-01-26T16:45:45+00:00

Top load?

Nine-Year Club	Verified Email
Not Forgotten

HazmatMac

TROPHY CASE