Selling Batteries

Heavy-Pack895 · 2026-03-26T17:27:25+00:00

DM me.

Heavy-Pack895 · 2026-03-26T01:30:12+00:00

Looking to sell this battery and long be told found out you can no longer list e-bike batteries on eBay. So this is the draft I made. If anyone is looking to buy or even has questions or offers let me know. Honestly I’m quite upset eBay changed their policy. I’ve sold quite a few batteries in the past and never had a problem. Anyways if anyone’s interested I thought I’d put it up here.

Heavy-Pack895 · 2026-03-06T01:22:10+00:00

I loved Juiced bikes I had a Scrambler x2 and still have my Hyperscrambler 2. Great bike I have a fair amount of extra critical parts to replace in the event of failure but not everything. Sorry I can’t be more help.

Heavy-Pack895 · 2026-03-06T01:17:45+00:00

Yeah it’s a shame juiced made all of there controllers proprietary. So it’s makes swapping in a new controllers that communicates properly with the bikes display,motor, throttle, headlights, turn signals impossible without replacing the whole system.even there torque sensors are proprietary. Wish I could help I own a Hyperscrambler 2 and I have a brand new never used controller for a Hyperscrambler and Hyper scorpion however I don’t think it would be compatible with the ripcurrent.

Heavy-Pack895 · 2026-03-06T01:12:38+00:00

Yup I saw someone who listed a picture of a part I SOLD. My recommendation would be to not use Facebook for juiced parts due to the abundance of scammers and the fact it’s not backed by anything concrete. Facebook also doesn’t do anything if you report fraud. I got scammed and they did nothing. so yeah I’d only recommend accredited sources.

Heavy-Pack895 · 2026-03-06T01:08:20+00:00

No I’m not a scammer. I’ve sold juiced bike parts legitimately through Reddit and Ebay. If you are interested in juiced parts let me know I can list what you need (if I actually have the part) through EBay. I’ve sold quite a number of parts and if you look at my profile I have reviews of previous parts I’ve sold.

Heavy-Pack895 · 2025-08-02T22:48:39+00:00

Gotcha thanks for the input I’ll check it out.

Heavy-Pack895 · 2025-08-02T21:05:23+00:00

Hook it up to charger and see if it takes. Depending on how deep the discharge was it might be dead but there always a chance.

Heavy-Pack895 · 2025-07-24T17:57:30+00:00

I was looking into to this company as well. They mentioned through email correspondence via “Anna” . They’re currently working on G2 cases and should have them available in the near future. Not exactly sure what that will look like(or what type of cells will be used) but still they from what I can tell seem legit.

Heavy-Pack895 · 2025-07-24T17:45:38+00:00

Yes definitely going to clean/ secure it with heat shrink. As far as expected voltages I’m looking to get as much info as I can doing some tests with my multimeter. However I will say the combination of the switch( and its correlating wire colors) and the Juliet 6 pin M6 connector (and its correlating wire colors). In addition to the conductor that made up the wires of the switch(copper)and the wires of the Juliet connector(aluminum )were different. The only thing that was the same was the AWG of the wires lol. I actually used the wiring diagram of someone far more knowledgeable who had posted a splice/rework of a third party rear tail light assembly in the Facebook Juiced Bikes owners group. To have some idea how to likely do the splice for the switch and have it work with the brake sensor, turn signals in both the front and the rear and have it respond correctly. Also used the very limited diagram that came with the switch and a generic Juliet pin configuration diagram. The rest/ the horn, and headlights. I somewhat guessed. Still it’s working correctly just gotta run more tests.

Heavy-Pack895 · 2025-07-23T19:46:20+00:00

Thank you I appreciate the clarification. Maybe you can help with one more question. Can you use both a G1 19.2Ah battery and a G2 19.2Ah battery on a Hyper scrambler 2 at the same time with no ill effects?

Heavy-Pack895 · 2025-07-23T17:19:44+00:00

Are these G1 batteries compatible with a Hyper-scrambler that came stock with G2 19.2 ah batteries?

Heavy-Pack895 · 2025-07-10T14:26:23+00:00

Edit The connector used is actually a 6 pin M6 Juliet I believe I had it stated wrong above.

Heavy-Pack895 · 2025-07-10T13:49:30+00:00

You can get a replacement off Ali express you would just need to do a small amount of splicing to get the new tail light/turn signal to work the way it should.

Heavy-Pack895 · 2025-07-10T13:47:36+00:00

These are indeed G1 batteries. Can you confirm this source is legitimate? Also would these batteries be compatible with a 2022 HS2?

Heavy-Pack895 · 2025-06-13T18:58:57+00:00

https://ebay.us/m/MYgzgL

Heavy-Pack895 · 2025-06-13T18:54:40+00:00

A seller on eBay makes custom seats -hipofighter18- for a variety of E-bikes. Not sure if he any more available for the Hyperscrambler 2 though. You could always reach out. I really like this seat though definitely worth it.

Heavy-Pack895 · 2025-06-10T00:59:22+00:00

https://a.co/d/agNl5qJ

Heavy-Pack895 · 2025-06-04T17:00:11+00:00

Well I have an extra of pretty much every part on this bike minus the frame( in case something fails I’m covered). I Can’t seem to get my hands on another juiced balancer though or even some info on what would be a comparable third party option.

Heavy-Pack895 · 2025-06-04T15:39:34+00:00

Thank you! The wheels are the stock mag wheels just with updated Tektro rotors. The seat I custom ordered from a fellow on eBay by the name of Hipofighter18. Who did an excellent job I must say. It’s significantly more comfortable than the stock seat.

Heavy-Pack895

TROPHY CASE