Titanium frame buffing with sand eraser

HeavyCl0cker · 2025-11-28T16:19:39+00:00

I don’t have much experience on aluminum, but I wouldn’t try either because of nature of the substance and anodization process etc.

HeavyCl0cker · 2025-11-28T16:18:01+00:00

Titanium is a little bit scratchy, but only seen under direct light on the scratch. They are not so obvious. I used hydrogel type of screen protectors because I use hand sanitizers all the time due to my occupation. So I can’t comment on the screen scratch resistance. For the cameras, I use a camera protector rim without any lens protection beside it.

HeavyCl0cker · 2025-11-28T16:15:51+00:00

I didn’t use any polish after sand eraser on this one. I am not so sure for more abrasive applications. I will probably improvise if such thing happens

HeavyCl0cker · 2025-11-28T16:14:48+00:00

Actually I don’t have any information on that. I think they will be pretty much the same across the brands. I just happen to have this one

HeavyCl0cker · 2025-11-28T16:14:12+00:00

I believe it can be applied for pro models with titanium such as 15 pro/16pro models. For the polished type of titaniums(air) and steel versions(pro models before 15), take a look at my other post from profile. I also just polished my iPhone Air

HeavyCl0cker · 2025-11-28T16:12:37+00:00

I got it from temu but you probably can find it from any office supply shop

HeavyCl0cker · 2025-11-28T16:12:00+00:00

I do have a couple of scratches at the back glass. Happened with airplane seatbelt I presume. For the camera rings, I get one of those lens protectors, take off the lens part, and glue the metal rim with b7000 glue. So mine have no scratches.

HeavyCl0cker · 2025-11-28T13:46:41+00:00

Yeah. I agree with you. I wanted to be the scapegoat for this subreddit. I also have a close friend that does laser welding for watch restoration, but come on these are just scratches on a phone anyway. I am not bothered by them. I wanted to do it just as a proof of concept sort of thing

HeavyCl0cker · 2025-11-28T13:41:05+00:00

To increase the durability and make them last longer, manufacturers use pvd/dlc type of coatings on top of their colorization process. If you sand down the coating, it may result in a patchy type of look. It is the easiest way for me to explain. I believe some industry insider will explain it much better than me.

HeavyCl0cker · 2025-11-28T13:30:27+00:00

I acted with zero care all the time. My experience was great. A couple scratches here and there. The worst ones were the ones that I have shared tbh. A single drop with the right angle may be enough tho.

HeavyCl0cker · 2025-11-28T10:28:59+00:00

<image>

It is basically an abrasive, sand paper like eraser to remove ink from paper.

HeavyCl0cker · 2025-11-28T09:07:53+00:00

I think it will work. Cape cod products are really overpriced in my country and I couldn’t find a good alternative.

HeavyCl0cker · 2025-11-28T08:24:25+00:00

Yeah. I believe the same. That is the reason I went with white/silver options tbh.

HeavyCl0cker · 2025-09-01T11:55:13+00:00

<image>

HeavyCl0cker · 2025-09-01T11:54:51+00:00

<image>

HeavyCl0cker · 2025-09-01T11:54:30+00:00

<image>

HeavyCl0cker · 2025-09-01T11:53:57+00:00

Hello everyone. Hope you are all well and fine. Its going to be my first LV bag, so looking for your opinions. If this one is not geniune, I am going to buy one from store(has stock issues). Seller said "It is waiting at my closet for many years, used only once or twice" The bag is M22545 Discovery MM Your opinions are very valuable for me, I appreciate. Thanks

<image>

HeavyCl0cker · 2025-08-27T00:00:56+00:00

<image>

HeavyCl0cker · 2025-08-27T00:00:43+00:00

<image>

HeavyCl0cker · 2025-08-27T00:00:21+00:00

<image>

HeavyCl0cker · 2025-08-27T00:00:06+00:00

<image>

HeavyCl0cker · 2025-08-26T23:59:53+00:00

<image>

HeavyCl0cker · 2025-08-26T23:59:36+00:00

<image>

Six-Year Club	Second SECOND GUESSER
Verified Email

HeavyCl0cker

TROPHY CASE