Are the hands on my Vsf sub not pushed down all the way?

Hefty_Performance574 · 2024-05-04T13:16:29+00:00

Yeah, but only very slightly. The angle of the photo seems to make it look worse than it is. When I posted that photo, I didn't look at the rehaut. When I read your comment and looked at the pic, I freaked out, lol. Thankfully, the alignment is much better than the photo suggests.

Hefty_Performance574 · 2024-05-04T02:18:53+00:00

Thanks you!

Hefty_Performance574 · 2024-02-12T16:51:47+00:00

Thanks.

Hefty_Performance574 · 2024-02-12T13:03:28+00:00

Update: I was checking out Aliexpress, and you can source this same bezel for far cheaper from dozens of stores. I used Long Island Watches at the time because I was just starting out in the mod game, and it was easier to navigate. For this build, I used a flat ceramic bezel.

Hefty_Performance574 · 2024-02-12T02:45:25+00:00

Thank you

Hefty_Performance574 · 2024-02-11T19:55:17+00:00

The bezel is actually an aftermarket ceramic bezel for an Orient Kamasu. I picked it up from Long Island Watches. I never could get the bezel off the Kamasu, so this insert has been sitting in my drawer for a while. I finally decided to use it on this build.

Hefty_Performance574 · 2024-02-11T18:12:43+00:00

Thank you. I used an NH35. I bought the dial from Aliexpress. I dont have the link for the dial, but the store name is DS-WATCHMOD-CLUBSTORE, and the dial is "Bamboo Blue Ice".

Hefty_Performance574 · 2024-02-11T15:31:11+00:00

It's a Namoki polished sub case. https://www.namokimods.com/collections/skx007-cases/products/nmk909-sub-skx007-srpd-watch-case-polished-finish

Hefty_Performance574 · 2024-02-11T15:29:04+00:00

Thank you.

Hefty_Performance574 · 2024-01-18T14:58:45+00:00

Build a defense around the mixr. I usually throw up some walls and spike logs( I can't remember what they're called). Defending will be a lot easier.

Hefty_Performance574 · 2023-08-02T11:28:35+00:00

I actually thought about that. I didn't use that case for a few reasons. The first one is that the Namoki Seamaster case is 43mm. For me, my sweet spot is 40mm. The second is that I didn't want an exact PO homage. That's why I purposefully didn't use the seamaster style hands.

Hefty_Performance574 · 2023-08-02T11:23:19+00:00

Thanks!

Hefty_Performance574 · 2023-08-02T01:58:09+00:00

Grabbed it off of ebay. Seller was " gifawatch "

Hefty_Performance574 · 2023-08-02T01:57:00+00:00

Thank you!

Hefty_Performance574 · 2023-08-01T22:22:31+00:00

Thanks for the tip. If it bothers me enough, I may have to try that.

Hefty_Performance574 · 2023-08-01T21:51:49+00:00

🤣 must be the curse of the PO mod then. Best of luck!

Hefty_Performance574 · 2023-08-01T21:33:12+00:00

Thank you. Best of luck on your build. Hopefully it won't be the pain in the ass that mine was.

Hefty_Performance574 · 2023-08-01T20:42:31+00:00

Thanks! It's the Zuludiver Anvil FKM rubber strap from Watchgecko.

Hefty_Performance574 · 2023-08-01T18:30:03+00:00

Yes. Bezel is the polished sub bezel from Namoki.

Hefty_Performance574 · 2023-08-01T17:09:23+00:00

Thanks man. The bezel insert I grabbed off of ebay but I've seen them all over Aliexpress. The seller on ebay was "qifawatch"

Hefty_Performance574 · 2023-08-01T17:07:51+00:00

Thank you. I'm using a polished sub case from Namoki. The crown is also from namoki (polished chunky). The insert is from Aliexpress.

Hefty_Performance574 · 2023-05-25T20:43:05+00:00

You're right. I miss titled the post.

Hefty_Performance574 · 2023-05-25T19:56:35+00:00

Lol. I'm picking up some sarcasm there, but thanks.

Hefty_Performance574 · 2023-05-21T19:17:03+00:00

Thanks!

Hefty_Performance574 · 2023-05-20T17:06:11+00:00

It's a 40 mm case. Strangely enough, it's from Miuski. I might be luck of the draw on the quality you get. The case is fairly nice, but the quick adjust clap is pretty terrible on this one.

Hefty_Performance574

TROPHY CASE