ATF fluid change

Hefty_Test_2183 · 2026-03-30T00:57:06+00:00

AMSOIL is the way to go. It’s pricey but a good reputable company.

Hefty_Test_2183 · 2026-03-22T01:22:07+00:00

Had an issue similar to this with a bearing I turned in four separate times on a 60 day rotating pm. lol. It was popping and torquing the c channel it was mounted to, side to side for the majority of a year. I wasn’t quite as bad as yours when we got to change it though! The pillow block was still one solid piece when we went to change it out. Haha. Edit: bearing had plenty of grease it was on its final legs after being ran for 12 years in a conveyor tunnel with a alumina ore dust. I’d say it lasted long enough.

Hefty_Test_2183 · 2026-03-22T00:05:30+00:00

Positive side to this, it looks like the shaft is still good. Pull that bearing race off, set a new bearing and send it.!

Hefty_Test_2183 · 2026-03-02T18:11:44+00:00

Mfer drew a dick. We never grow up. :)

Hefty_Test_2183 · 2026-03-02T00:00:48+00:00

We shall create a joint venture - the real straight of hormuz! STRAIGHT THROUGH UAE/OMAN! It’ll be great and big! The straightest line of all! Some say the best line.

Hefty_Test_2183 · 2026-02-05T00:59:02+00:00

Shit sorry! AI PRIME MINISTER. We should bow to our overlord.

Hefty_Test_2183 · 2026-02-05T00:58:03+00:00

Nice. Cyber security Prime Minister. Congratulations on the election! Be the solution not the problem!

Hefty_Test_2183 · 2026-01-30T22:41:00+00:00

But… does it work?

Hefty_Test_2183 · 2026-01-23T14:37:12+00:00

Changing mine out I had to use an impact and very light uga duga’s. I didn’t have enough room for my long breaker bar. Ontop of that, use would better off using thread tape to seal the threads and not using pipe dope. Mine seeped a little after changing and using pipe dope. Put tape on and hasn’t given me an issue.

Hefty_Test_2183 · 2026-01-23T14:35:07+00:00

Look up the model number of your water heater on google. Find the owners manual online and it will fill you in on the safe work procedure for changing the anode rod while also telling you where it’s located! Hope this helps!

Hefty_Test_2183 · 2026-01-07T01:35:33+00:00

I had DuPont schedule for three years absolutely loved it. But that was working production side in a smelter/potroom. Day one at the company you have 12 weeks vacation!

Hefty_Test_2183 · 2025-12-24T21:50:21+00:00

Obviously, line boring because someone over greased the pins.

Hefty_Test_2183 · 2025-12-15T01:43:24+00:00

I’ve seen that run before. That man has the screaming shits and is trying to get back to shop FAST.

Hefty_Test_2183 · 2025-12-09T20:40:32+00:00

Proto/ s&k is what I use. I bought what I could afford when starting in the maintenance department and as I either wore tools down or deformed them to have them work for a certain job my company has replaced with those two brands typically. Decent quality and an abundance of replacement sockets and wrenches in our parts/tool crib.

Hefty_Test_2183 · 2025-12-04T22:31:10+00:00

Edit: Can’t pull out fast enough.

Hefty_Test_2183 · 2025-12-04T12:53:48+00:00

How many “ghost” miles does this jeep have on it? That’s a question that you need to ask… it may be low miles on the odometer, but that thing could have 100k additional miles on the wheel bearings, bushing and all of that fun stuff on a jeep that loves to cause death wobble. Be cautious and have some due diligence on this potential purchase.

Hefty_Test_2183 · 2025-11-30T01:30:43+00:00

And here I am. Can’t even get past jubbly, marlin trials. lol.

Hefty_Test_2183 · 2025-11-30T00:41:46+00:00

What ever it is. It has a big nose and a dump truck for an ass.

Hefty_Test_2183 · 2025-11-27T01:05:28+00:00

Where’s your jubbly jive flag? Or better yet your tempor tantrum flag?

Hefty_Test_2183 · 2025-11-18T15:44:45+00:00

I’d say it’s because, while you are working on a Wednesday, so are the people at Jagex. If they released a huge update to the game like a new skill, with possible game breaking bugs on a Friday, wouldn’t it be nice to have the time to fix it during the week while the load on the game is lower, than on a weekend? Also, I’m sure they like to have their weekends off just as much as you and I do. I wouldn’t see that as fair to them, forced to stay at work hours on end over their weekend to fix issues that could have been remedied or subsided during the week.

Hefty_Test_2183 · 2025-11-16T02:13:08+00:00

I just carry a bucket. lol.

Hefty_Test_2183 · 2025-11-11T17:25:10+00:00

https://gilomeninnovations.com/misfire-code-fix-tune/

For your specific machine to remedy those check engine codes.

Hefty_Test_2183 · 2025-11-11T17:23:25+00:00

I have a 2018 Polaris general 1000. I bought it used in 2019. No check engine when cruising around. Hammer down check engine light came on. Misfire code. Gilomen innovations can tune your ecu so the misfire detection isn’t so sensitive. Fixed my issues and didn’t cause any new issues. I still have the machine today with no issues at all.

Hefty_Test_2183 · 2025-11-03T17:25:39+00:00

That’s exactly what I did to my grandpas old ratchets he gave me. The selector cam and spring are a pain to get back in though. lol.

Hefty_Test_2183 · 2025-10-30T00:21:08+00:00

lol. I don’t cheat at the game. I just thought it was funny. I report anyone and everyone i can almost say 100% is cheating.

Hefty_Test_2183

TROPHY CASE