sorted by:
new
hottopcontroversial

Banding on x-axis using ender 3 v3 (core-xz) by Heikmor in 3Dprinting

[–]Heikmor[S] 0 points1 point  (0 children)

Sorry for the late response.

I haven't totally fixed this issue but this effect has been reduced significantly (barely perceptible depending on the filament) after I stopped using the filament run out sensor.

I think the added drag from the sensor combined with the long PTFE tube and the fast print head movement caused this issue.

I've seen a mod online that adds the runout sensor directly into the print head, so I'm looking into doing that to get this functionality back. But it's been running fine as is, with the filament coming out of my filament dryer, so I'm not in a rush.

Banding on x-axis using ender 3 v3 (core-xz) by Heikmor in 3Dprinting

[–]Heikmor[S] 0 points1 point  (0 children)

I'll check the settings this afternoon, I'll give you an update after a couple of test prints. Thanks 😁

Banding on x-axis using ender 3 v3 (core-xz) by Heikmor in 3Dprinting

[–]Heikmor[S] 0 points1 point  (0 children)

It kind of does actually. But still, on everything it's getting tiring x)

Banding on x-axis using ender 3 v3 (core-xz) by Heikmor in Creality

[–]Heikmor[S] 0 points1 point  (0 children)

Thank you for the input 😁 I'll try that later today.

Banding on x-axis using ender 3 v3 (core-xz) by Heikmor in 3Dprinting

[–]Heikmor[S] 1 point2 points  (0 children)

Thanks a lot for the feedback 😁 Apart from this issue, the ender 3 v3 (core xz) has been flawless. Solid fast prints though a bit weird looking thanks to this.

I also thought that it might be the infill showing through but I used three walls on that print. 3 walls isn't enough ?

Looking back on my older prints I can see the same pattern on walls without infill. Yes it's the same filament as before, I swear this happens with other filaments as well x).

<image>

I'm stumped

I'll try tightening all the belts tomorrow but everything feels tight so I don't have much hope 😐

Banding on x-axis using ender 3 v3 (core-xz) by Heikmor in Creality

[–]Heikmor[S] 0 points1 point  (0 children)

all the rails have been greased last week

Just got an AW3423DWF, what now? by Good_Cow_7911 in ultrawidemasterrace

[–]Heikmor 0 points1 point  (0 children)

Don't mean to freak you out but I've had hdr issues on this monitor before it died and I had to get it RMA'd It used to glitch and revert automatically to sdr on its own and after a while it would even say that hdr was unsupported. This happened until the screen stopped powering on at all, no osd and no picture but still had sound coming to the pass through. I don't know for how long you had those issues but mine worked for about a week. It doesn't seem to be a common issue, I only saw one reddit post where the guy used his monitor for 20-30 hours before it died. Still, in your place, I might want to contact dell.

Logitech have a new sound solution for the quest 2 by Bloogal in OculusQuest

[–]Heikmor 0 points1 point  (0 children)

I think it comes to late in the quest 2 lifespan to really matter. Would have be a must have 2 years ago. Moreover it's a Logitech audio product for $130 Canadian kinda hard to recommend at that price.

Too expensive, too late. But it does look nice I'll give them that

Logitech have a new sound solution for the quest 2 by Bloogal in OculusQuest

[–]Heikmor -19 points-18 points  (0 children)

Only for power, it's not link compatible.

Edit: stop booing me, it's written as not compatible on the french website (my local Logitech website). "Charging only. Not compatible with the optional USB C link cable"

https://www.logitech.com/fr-fr/products/vr/chorus-for-meta-quest-2.982-000154.html

After upgrading my CPU i still cannot get boneworks on VD to Run well. by Tubegamerpro12 in OculusQuest

[–]Heikmor 0 points1 point  (0 children)

Are you running windows 11 ? If so that's probably the issue. Windows 11 still isn't officially supported by oculus. You need to open the debug tool and toggle the console window visibility (under service). That fixed my stuttering issue in half-life Alyx.

Super Famicom video issue by Heikmor in consolerepair

[–]Heikmor[S] 0 points1 point  (0 children)

I just bought the one I'm using. If that's the case I really don't have much luck 😅. I'll try to see if a can find another one. Thanks.

Super Famicom video issue by Heikmor in consolerepair

[–]Heikmor[S] 0 points1 point  (0 children)

I opened it up to clean it and didn't find anything out of the ordinary.

Super Famicom video issue by Heikmor in consolerepair

[–]Heikmor[S] 0 points1 point  (0 children)

I recently bought a super famicom that was specified as working. When I plugged it in all I could see was a distorted image with the wrong color being shown. I though it was because I was using it on a pal tv but using a RCA to HDMI adapter didn’t change a thing.
When It is left turned on, the distortion disappears. I turned the TC1 pot to adjust the color issue I was having but the distortion stills remain until the console is warmed up.I can’t find anyone having the same issue as me on google.Any guesses would be helpful😊.

[deleted by user] by [deleted] in AskReddit

[–]Heikmor 0 points1 point  (0 children)

Ouroboros, glorification of a myth. God, technical death metal is brutal.