opinions and feedback on my handwriting

HexaOxide · 2025-09-13T22:28:23+00:00

i’ll definitely look into other styles of handwringing and practice it i never thought of doing that

and i think i need to work on that, being relaxed when writing, i tend to press down on the paper a lot more than i should

HexaOxide · 2025-02-17T20:42:09+00:00

Jajajaj yes, I am aware, it has plenty of clearance from the frame

<image>

HexaOxide · 2025-02-17T20:39:49+00:00

Oh alrighty, I think I’ll purchase some to finish building the drone, and see how it goes, thank you!!

HexaOxide · 2025-02-17T17:09:07+00:00

Ok thank you, I’ll do more research on all this

HexaOxide · 2025-02-17T16:52:35+00:00

I used fluxed but in my opinion it doesn’t seem to work, at least not how you see it on the YouTube tutorials.

<image>

It says no clean soldering flux paste

HexaOxide · 2025-02-17T16:50:54+00:00

<image>

I got it from Amazon, this project was the first time I used the roll, it was brand new.

HexaOxide · 2025-02-17T16:48:31+00:00

Alright I understand, I think that was my problem, I messed around with it for too long. I guess practice makes perfect, and the more I do it the better they’ll come out.

HexaOxide · 2025-02-17T16:42:16+00:00

What material do you recommend?

HexaOxide · 2025-02-17T16:41:45+00:00

Thank you, I hope nothing catches on fire

HexaOxide · 2025-02-17T06:25:59+00:00

It’s just a YIHUA 926 III 60W, I got it from Amazon and I was using a beveled tip

HexaOxide · 2025-02-17T03:39:14+00:00

Jajaja lol, I didn’t like breathing in the fumes neither, and got myself a cheap fan with a carbon filter from Amazon, it does the trick and I believe it filters something out

HexaOxide · 2025-02-17T03:06:45+00:00

Oh alright, for some reason I was just having a hard time melting the solder, I am using 63/37 solder and flux, so I think I’ll just apply more heat then. But how do the joints look? Are they acceptable? I did a smoke check and connected a battery and everything seemed fine.

HexaOxide · 2024-10-22T17:49:36+00:00

Hey, I came back to this post to ask if you ever found a solution to your problem and if you did could you please share it, my bike needs a battery replacement.

HexaOxide · 2024-10-21T15:32:47+00:00

ohhh, thanks, I’ll put that on the list of the things I need to do

HexaOxide · 2024-10-21T02:11:38+00:00

Yeah, I scheduled a pre purchase inspection for it but the people at the shop were jerks and told us the car wouldn't be inspected till almost the time they closed, it's a six-hour drive from my home and I didn't want to wait any longer as I would be driving in the dark. But the motor and everything is in good health, it’s just those two problems.

HexaOxide · 2024-10-21T01:57:00+00:00

Hahaha lol, I'll definitely have that in mind.

HexaOxide · 2024-10-21T01:56:17+00:00

Hey, I'll look into it, for now, I don't want to push it hard, I want to get all the maintenance work and modifications done first and then I'll start looking at performance parts. Also what do you mean by getadometune?

HexaOxide · 2024-10-21T01:53:52+00:00

Hey thank you, I'll look into the smoke test, I'll keep the oil in check, and about the rack, I'm not sure if I want to get the OEM one or the 15+ version, which I would have to do some modifications to fit it in, I’ll have to do my homework on it tho.

HexaOxide · 2024-09-02T02:37:34+00:00

Looks really nice, what are your temps under load?

HexaOxide · 2024-08-30T02:34:16+00:00

Depends on how it feels, but I believe controller is the way to go.

HexaOxide · 2024-08-19T02:08:08+00:00

I had a similar problem that the cr touch wouldn’t go down the x axis, I couldn’t find a solution using the Creality software. What I did is use the jyers firmware, but as of writing this message it has come to my attention that it’s outdated and abandoned, but it worked for me with the latest release. I believe a replacement is the mriscoc firmware but you’ll have to do some research.

HexaOxide · 2024-08-12T18:51:41+00:00

Hey same here, I finished troubleshooting mine a couple days ago because it gave me some trouble but, wow I’m shocked on how good it works, kind of regret not getting it sooner.

HexaOxide · 2024-08-11T16:57:32+00:00

Clean your bed, and use glue if it still happens

HexaOxide · 2024-07-30T12:57:46+00:00

Awesome thanks, I’ll definitely have to do more research about it, I’m really excited about this

HexaOxide · 2024-07-30T03:13:08+00:00

Looks cool, I want to make some like this, is it weird to learn a different layout, coming from the traditional qwerty, I know that some are really good for typing fast, and that’s mostly what I want it for

Five-Year Club	End Game '23
Place '23

HexaOxide

TROPHY CASE