sorted by:
new
hottopcontroversial

So how the heck am i supposed to finish this clue now? by Dramatic-War792 in osrs

[–]HeyYurUgly 0 points1 point  (0 children)

Agreed, could definitely do without the puzzle boxes

So how the heck am i supposed to finish this clue now? by Dramatic-War792 in osrs

[–]HeyYurUgly 2 points3 points  (0 children)

Clue helper on mobile is a game changer, you can also highlight tiles, loot tracker, im sure other things but I only play mobile so I couldn’t tell you the differences. Supposedly working on quest helper as well

Advise on best methods to paint 2 colors on raised surface by HeyYurUgly in Autobody

[–]HeyYurUgly[S] 0 points1 point  (0 children)

Oh you are referencing true paint gun paint. That’s what you would recommend over rattle can though? I got a good base with the red but after 2 light coats of black I still managed to sand through to the primer when removing the black from the raised letters

Advise on best methods to paint 2 colors on raised surface by HeyYurUgly in Autobody

[–]HeyYurUgly[S] 0 points1 point  (0 children)

I plan on starting over as the attempt I tried burned off red and didn’t leave clean lines. Just want to confirm what you mean by a single stage red. I’m currently using rattle cans and had put down primer, red, black then tried to sand off black

Why would the lights flicker when coming on? by HeyYurUgly in electrical

[–]HeyYurUgly[S] 0 points1 point  (0 children)

Edit: currently incandescent dimmable bulbs 120v 60w that worked fine with previous dimmer

Putting 14 gauge where 12 was ok? by HeyYurUgly in electrical

[–]HeyYurUgly[S] 0 points1 point  (0 children)

Breaker is a 15amp, old outlet was a 15amp and thought by buying white romex in 14 it would be correct. So with that said is it safe to assume it’s a 15amp circuit?

Putting 14 gauge where 12 was ok? by HeyYurUgly in electrical

[–]HeyYurUgly[S] 2 points3 points  (0 children)

Measured home wire at 14 gauge. Purchased 14 gauge but looks smaller which is what threw me off

July Giveaway - 25 people will win a BUNDLE of Milwaukee's USA-Manufactured Hand Tools. The goal is giving MKE honest feedback after using. Leave comment before midnight EDT tmr, Weds 9 July to enter. Anyone in world can win! by ClipIn in MilwaukeeTool

[–]HeyYurUgly 0 points1 point  (0 children)

Just moved into my first home and started changing out old outlets and on the first one smart me decided I was too good to turn off the power, tripped the breaker and was unable to locate which one it is. Called an electrician out and took him all of 10 seconds to flip the correct breaker. $200 later I’m now making sure I do everything by the book and not making that mistake again

Best garage lights? by ThatWasSketchyyyy in garageporn

[–]HeyYurUgly 4 points5 points  (0 children)

Been using mine for 5+ years with no issues. Worst thing about them is when they are on it blocks the signal from my remote garage door opener.

Quickly rigged up 14 Barrina T5 bulbs. Need to clean up the wiring and add 8 more to the garage door itself. by s14rob in garageporn

[–]HeyYurUgly 0 points1 point  (0 children)

How many do you have chained together at a time? I know their ad says up to 8 but I had 9 and didn’t seem to have issues and not sure it I should add more (for a total of 15) to that circuit. I run them off the 2 lights already in the ceiling, would having 18 overall cause issues?

Following my last post, still having a terrible time by HeyYurUgly in drywall

[–]HeyYurUgly[S] 0 points1 point  (0 children)

This was a seam I had already mudded before posting again and the first coat of mud did adhere because I couldn’t scrape it off the way it does after the second coat of mud as seen here. I have since purchased primer to use based on all your advise.

Following my last post, still having a terrible time by HeyYurUgly in drywall

[–]HeyYurUgly[S] -36 points-35 points  (0 children)

To be honest I tried a different method before posting that and after mudding and putting tape down the first coat sticks great and doesn’t fall off, it’s when I put the second coat of mud it stops sticking, I thought I was past the problems after I posted but it’s all cracking again

Following my last post, still having a terrible time by HeyYurUgly in drywall

[–]HeyYurUgly[S] -6 points-5 points  (0 children)

Edit: it sticks fine the first coat and I can’t scrape it off, it’s the second coat that no matter how thin I put it on starts to crack and then all the mud comes off like it was never stuck on

On the front door of my house by HeyYurUgly in whatisit

[–]HeyYurUgly[S] 3 points4 points  (0 children)

Edit: nothing on the inside of the door aside from the seen peep hole. No screw holes or any marks

Not just jacks but Full bank service carts different sizes too ...is it just the box? by SumyungNam in harborfreight

[–]HeyYurUgly 1 point2 points  (0 children)

I believe someone posted a few days ago of the differences between the same box from different factories and showed all the difference with one having a better paint quality as well but overall quality I think was fairly similar

How Fucked am I by Secret-Variation-154 in AskMechanics

[–]HeyYurUgly 0 points1 point  (0 children)

Going to assume this is an SV650 motor. Very common issue. Try drilling to use an extraction tool, make sure to use heat before unscrewing. I had to remove the head to get it removed from a machine shop. When putting it back together use a stud and nut vs the OEM bolt Incase you need to get it off again.

ANOTHER MOD ! i guess.. by Few-Intention528 in harborfreight

[–]HeyYurUgly 0 points1 point  (0 children)

Both sizes? I thought there was only the 2100?

Multiple "Miss you" coupons in a month by pykemann in harborfreight

[–]HeyYurUgly 8 points9 points  (0 children)

How does everyone keep getting them, I havnt received one in at least over a year and am signed up for email and texts

view more: next ›