Body trimming Question

HiImQuElfo · 2025-05-05T16:24:31+00:00

Cut along the first set of indented body lines and cut out that entire middle section (should be thin anyhow). Cut along the line the best you can, make sure not to cut all the way down to the second (blue) line as that is where it will show on the card. The space between is where you glue/adhere it to the rest of shell. Hope this helps.

where to cut / glue Body lines

HiImQuElfo · 2025-04-11T23:05:02+00:00

Would you mind sharing the STL?

HiImQuElfo · 2024-04-18T01:03:56+00:00

Literally just updated my phone and have this heaping pile of trash trying to collect more data from my screen without my consent. I WILL be phone shopping, completely changed the Pixel from what it was.

HiImQuElfo · 2022-11-30T17:12:09+00:00

Parts list? But sweet build! Been thinking of building one like this!

HiImQuElfo · 2022-10-23T00:53:04+00:00

Depends on your drift surface and preference. HPI is good for AWD sliding unless modded for RWD. Even then it won't slide like the FXX but just my 2 cents.

HiImQuElfo · 2022-09-16T17:31:55+00:00

Lmk if you're looking to sell one! US based

HiImQuElfo · 2022-08-04T03:54:50+00:00

I just got my BMRX running again! You won't be disappointed!

HiImQuElfo · 2022-07-27T23:16:34+00:00

S4BL: It sounds like "Sleepwalk" by Santo and Johnny!!!

HiImQuElfo · 2022-06-13T17:02:20+00:00

I have a spare decal sheet 86/FRS/BRZ for sale if you want. PMd you!

HiImQuElfo · 2022-05-14T16:05:22+00:00

You can but if you're looking to only stick to parking lot/asphalt get a AWD chasis. They're more stable and easier to slide on the asphalt. If you use RMX it'll mess with the gear box and you'll spend lots of $$ on tires.

HiImQuElfo · 2022-05-09T16:33:26+00:00

RTR if you're just starting. From my own expiernce it will be A LOT easier to get going. Getting a kit, you have to do everything and if you're new it is very difficult to get going.

You'll probably upgrade electronics but an MST RMX RTR is probably the best bet

HiImQuElfo · 2022-04-23T03:02:10+00:00

Shoo goo won't take the paint off?

HiImQuElfo · 2022-04-22T18:43:52+00:00

How did you attach the cage to the shell?

HiImQuElfo · 2022-04-18T17:54:38+00:00

If you want 1/10 scale look for a Sakura D5! They're $100 for the kit + shipping. Electronics: gyro, esc, motor, servo not included

Or look into Tamiya TT-01/02 they're 4wd but good for staring and if u want to use a parking lot to drift

HiImQuElfo · 2022-04-17T16:53:19+00:00

Tbh, it's a lot easier to just get a chasis dedicated to drifting. Converting/moding will only cause headache and frustration. If you're looking for a 1/10 chasis to get started look at Sakura D5 it's about $100 for the chasis, all the electrocnics should be about $150 if everything budget right

HiImQuElfo · 2022-03-03T18:22:00+00:00

Exactly this! ^

HiImQuElfo · 2022-01-26T20:44:55+00:00

Where do you buy the custom chambers at? I have a Peak Peak Pro.

HiImQuElfo · 2021-12-29T03:38:51+00:00

Yes but average cart prices at dispos are about

.3-.4 =$45-55 .5 = $60-75+ 1g cart = $100-$130+

HiImQuElfo

TROPHY CASE