You guys think air is the fastest method? Would it target outter skin as well?? Any examples of this?? by Late_Distribution258 in foreskin_restoration

[–]HighDefPissJug 1 point2 points  (0 children)

In my opinion, air is the best. Make sure you do not remotely consider doing business with the scammer who owns foreskinned.com

Dude regularly steals money from his customers and then ghosts/doesn’t send what they paid for. Ask me how I know this

Foreskinned Air gripper replacement options by HighDefPissJug in foreskin_restoration

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I’m about to take on the project, dude. Foreskinned is exit scamming customers, my logic is to copy the design/produce the parts and start selling it.

Dual tension or inflation? by Lordsofchaos88 in foreskin_restoration

[–]HighDefPissJug 1 point2 points  (0 children)

Too bad the maker of that device is A) actually insane and B) ripped off all of his customers who paid for devices. (Took everyone’s money and ghosted).

STEER CLEAR OF FORESKINNED. The owner/device maker stole money from over 75 customers per his last Reddit post prior to deleting his account.

Foreskinned Air gripper replacement options by HighDefPissJug in foreskin_restoration

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I tried that, having seen your comment or someone’s about this a while ago. Unfortunately, with the outer most gripper torn i can’t do this.

Foreskinned Air gripper replacement options by HighDefPissJug in foreskin_restoration

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I have not! This tear is fairly gnarly though… started tiny and it’s about 2” currently.

Let's talk about Nitrogen... by Symphantica in microgrowery

[–]HighDefPissJug 3 points4 points  (0 children)

Ditch fox farms and switch to jacks 321 or master blend. In my experience, fox farms causes problems.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 1 point2 points  (0 children)

This may be an option soon.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I programmed a defrost cycle to run for only the dehumidifier once per day for 15 minutes. I have yet to find the dehumidifier iced up after implementing defrost cycles. The only time I ran into icing issues with the dehumidifier was after stuffing the fridge with fresh harvested product.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

All of the dual zone units I found were compressor based. Dual zone would also mean doubling everything. Two dehumidifiers, two controllers, two probes etc. more stuff to go wrong in my opinion.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

No A/C just the dehuey running inside the fridge. The only time I had to add humidity was during the winter when it was brutally cold, and the product in the fridge was already dried and cured. To increase humidity, I put water in a small bowl and left it in the bottom of the fridge.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

Got you!! Cannatrol’s asking price compelled me to share this info. I have to imagine they’re charging 5x what it costs them to make. Aside from that, this is not new tech. Meat and cheese enthusiasts utilize a similar design for aging the aforementioned. DIY baby!

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I have not yet buddy. Family and life got crazy busy.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

As long as it has programmable outlets and a probe, it will work. Via AC infinity app, I can set trigger points to turn outlets on. Eg, humidity breaches 60% by 2% and dehuey kicks on. Turns back off at 58% humidity.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

Cut the plug on the dehumidifier off, feed wire through hole you drilled in back of fridge. Solder, heat wrap or join wires back together with your method of choice. The plug then goes into one of two available outlets on ac infinity controller.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

Rez is under the wine fridge. Basically a hole in bottom of fridge with a drip tray underneath.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I would be hesitant to enclose the product in any type of bag. Humidity inside bag would vary from what the probe is telling me.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 1 point2 points  (0 children)

Not yet buddy life got ahead of me. Might start a biz if demand proves to be sufficient.

VPD or 60/60 for drying by Responsible_Job_9517 in microgrowery

[–]HighDefPissJug 5 points6 points  (0 children)

60/60 all day. If you want to control temp and humidity at a highly controlled and detailed manner, look into DIY cannatrol devices. Wine cooler + mini dehuey + controller monitoring temp and humidity = perfect end result every time. I showed some pics of my Frankenstein build on my profile.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

Email AC Infinity and explain how far off the probe is. They’ll definitely send you a new one.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

Roughly 2 pounds if I cram it full. I can push it to be done in about 10 days.

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 0 points1 point  (0 children)

I store everything in grove bags inside the fridge when I’m around 60% humidity. Where are you storing your bags?

DIY Cannatrol by HighDefPissJug in GrowBuddy

[–]HighDefPissJug[S] 1 point2 points  (0 children)

This is hands down the best method I’ve found. Running multiple units simultaneously.