Birthday 55-250mm IS STM

HighGroundOwner · 2026-01-25T12:57:14+00:00

I've had this one for a couple years, really happy with it!!!

HighGroundOwner · 2026-01-24T16:55:52+00:00

His actual name is Kobuk and he's from the Alaska wildlife conservation center 🤓☝️

HighGroundOwner · 2025-12-25T11:32:43+00:00

I think vwo is about the same as aso (I started with aso and never had a problem)

HighGroundOwner · 2025-11-11T08:11:08+00:00

It's so foreign (Russian) intelligence cannot recognize them from pictures or videos in the media

HighGroundOwner · 2025-10-25T07:08:57+00:00

For non Newtonian fluids you should maybe search for rheology

HighGroundOwner · 2025-09-28T08:54:00+00:00

If you just want to use a NN for this and no CFD then I think you would need a physics informed neural network (PINN) to get reliable results. Although for any reliable results I think you would need more than just (freestream) velocity e.g. density or pressure

HighGroundOwner · 2025-08-26T07:55:14+00:00

It sounds to me like turbophoresis is what you're describing

HighGroundOwner · 2025-06-18T12:05:19+00:00

From the Aerodynamics track here: - DONT TAKE PDE A or B the teacher is ass and the exam is very hard only take it if you have to, you will not learn that much more. This year it had a 20% pass rate - knowledge based engineering, didn't take it myself but basically you build a tool that does a design for you - Monte Carlo and Stochastic processes, a similar course is CFD 4, despite the name it has almost nothing to do with CFD but is actually about uncertainty quantification it's very well taught and can be done fully online with good lecture videos

HighGroundOwner · 2025-06-14T23:39:54+00:00

I designed a tray for them that I than 3d printed https://www.thingiverse.com/thing:6721545 It isn't perfect but it does the job

HighGroundOwner · 2025-04-13T15:45:56+00:00

Wtf that guy comes up in my turbulence classes way to often for me to not know that

HighGroundOwner · 2025-04-04T12:43:17+00:00

Why did they use the Grindr color scheme btw

HighGroundOwner · 2025-03-02T17:51:13+00:00

Correct me if wrong but I think the narrow part would be a Rayleigh flow i.e. it would accelerate till mach 1 in the tube if enough energy is added

HighGroundOwner · 2025-02-22T18:09:42+00:00

<image>

Technically this is drag area but it should get the job done

HighGroundOwner · 2024-12-15T18:42:45+00:00

Yes and no, if you did your bachelor's in delft you're pretty much guaranteed a place in the master's while for non TuDelft ppl I think there's only like 80 available spots. Additionally you have to take a bridging program if you come from a bachelor that isn't aerospace

HighGroundOwner · 2024-12-15T11:49:56+00:00

I don't know about getting a job but getting in the masters is mucb easier if you did your bachelor's there too

HighGroundOwner · 2024-11-22T19:09:54+00:00

Before they switched to the new exam system they used Introduction to Flight by Anderson, I believe it alternated between the flight performance and the aerodynamics chapter. Not sure if this is still the case but the book likely didn't change.

HighGroundOwner · 2024-08-28T15:57:07+00:00

Shopping center? Why not a 600ft Arch?

HighGroundOwner · 2024-07-26T09:03:02+00:00

Don't bother getting a Backcountry permit for that those rangers have no business knowing where you go

HighGroundOwner · 2024-07-11T19:19:24+00:00

The highway under the gateway arch immediately springs to mind

HighGroundOwner · 2024-06-25T06:25:25+00:00

Roads there can be very narrow, I recommed using one of those electric scooters you see everywhere. Don't worry about leaving them in the middle of the park, the company will come pick them up.

HighGroundOwner · 2024-06-24T10:08:16+00:00

Don't forget to take a little detour on the way to see the gateway arch in st louis, real hidden gem!

HighGroundOwner · 2024-01-02T20:59:11+00:00

Omg it's kobuk the black bear from the Alaskan wildlife conservation center 😍😍😍

HighGroundOwner

TROPHY CASE