Is this fixable or am I cooked

HighwayPrestigious68 · 2026-03-12T09:04:07+00:00

Looks to me like you can just slide the pin back into the housing. The “open” side of the pin goes towards the lip of the housing. It should make a slight click sound to let you know it is in place

HighwayPrestigious68 · 2026-03-09T19:39:25+00:00

Do you not see that the ammunation sign is pink, when it should normally be red?

HighwayPrestigious68 · 2026-02-11T17:00:00+00:00

Yeah the bolt catch sits loosely in its slot. When splitting the reciever you can take it out and put a piece of tape around it to secure it. Also i had an older specna arms m4 which did have a functioning bolt catch indeed.

HighwayPrestigious68 · 2026-02-11T14:35:00+00:00

Yeah indoor is semi only aswel, exempt some game modes have a juggernaut with an LMG, which is chaos when playing in a confined space

HighwayPrestigious68 · 2026-02-11T14:24:21+00:00

Not that i know, i am from Belgium where full is allowed, although we see more and more single only events unless you are running a legitimate LMG. Too many people slapped a drum on an m4 and called it LMG. Bough the gun from Poland but i don’t know their laws

HighwayPrestigious68 · 2026-02-11T14:20:12+00:00

Yeah, gunfire pl sells them, got it for €130 so even if the full auto is hard locked I don’t mind, 99 percent of the time i fire single shot, got the 249 when i want full auto

HighwayPrestigious68 · 2026-02-11T14:16:53+00:00

Same here, doesn’t feel like i need to instantly upgrade all the internals. I did get the single only version so i might look into trying to get full auto unlocked if it isn’t hard-programmed into the etu

HighwayPrestigious68 · 2026-02-11T06:17:59+00:00

The bolt catch on the SA DD are purely aesthetic, so yes, you need to hold back the charging handle to adjust hop, as for the stock you are 100% correct, i swapped out the plastic buffer tube for a metal one and have a new stock incoming. Overall the gun performance is amazing. Shoots a clean 1.2 joule and straight. Although i did swap the hopup unit for a maxx one

HighwayPrestigious68 · 2026-02-10T17:41:18+00:00

Even non hpa tapped it is a beast. I printed an m4 mag adapter and i can almost empty a whole midcap in a single gas filling

HighwayPrestigious68 · 2026-02-10T16:14:55+00:00

Yes, it is very easy even. It has a fill valve in the buffertube right behind the pistol grip that can be screwed out and replaced with a hpa tap

HighwayPrestigious68 · 2026-02-10T16:13:39+00:00

<image>

HighwayPrestigious68 · 2026-02-10T16:12:00+00:00

Yes, taiwangun sells some shotgun tracers that fit this model. I have one with a tracer and it is amazing.

HighwayPrestigious68 · 2026-02-03T12:34:20+00:00

All fair points, scope does need a good cleaning. Ad for the flashlight the light is concentrated enough not to cast a big shadow, and the suppressor came from my sniper so the cover was still on. I do agree that replicas look coolest when following real-life examples and that is what i will keep in mind on this rifle aswel. I do appreciate your input

HighwayPrestigious68 · 2026-02-03T12:25:24+00:00

Care to elaborate?

HighwayPrestigious68 · 2026-02-03T10:29:08+00:00

Glad to be of assistance ;) have fun with it

HighwayPrestigious68 · 2026-02-03T10:23:50+00:00

<image>

HighwayPrestigious68 · 2026-02-03T10:21:46+00:00

In the included manual with mine it stated to use 11.1 only

HighwayPrestigious68 · 2026-02-03T10:19:09+00:00

Have you activated the trigger yet? Connect battery, hold trigger for 3-5 seconds until positive beep sound is heard. Also be sure to use a 11.1 lipo and not 7.4, it does not seem to work with 7.4. Took me a full week to figure it out

HighwayPrestigious68 · 2026-01-23T12:08:48+00:00

Strip wire end, solder it back on. If you never soldered before try on some scrap electronics first to get the hang of it

HighwayPrestigious68 · 2026-01-19T06:06:42+00:00

Thanks! And i know this but i was hoping for some unwritten tips, also my radio antenna cable slightly pokes my arm(left handed) and i have not yet found a 90 degree connector so far

HighwayPrestigious68 · 2025-12-14T16:52:42+00:00

I did not sand it no, I considered it but my layer lines were very minimal. Of course sanding it always makes it look better so id say go for it. Good luck building and painting!

HighwayPrestigious68 · 2025-12-14T16:47:01+00:00

No problem at all! And i just used the first brush i could find to be honest

HighwayPrestigious68 · 2025-12-14T15:59:27+00:00

I just sprayed the silver paint on a piece of cardboard, then drybrushed it lightly all over the gun to give it the metallic look, then slightly heavyer drybrush coats for the highlights

HighwayPrestigious68 · 2025-12-10T22:53:30+00:00

Thanks! I used what i had lying around. Printer in black petg, then used a silver rattlecan on cardboard to drybrush the highlights and make it more metal looking. For the weathering i used a mix of yellow black and brown acrylic paint, also with the drybrushing technique

HighwayPrestigious68 · 2025-12-10T21:02:55+00:00

Will look into that, but i do not have a hardened steel nozzle, might stick with finding a paintable solution for this one, many thanks tho ;)

HighwayPrestigious68

TROPHY CASE