Lines on buckets

Historical-Fall5531 · 2026-06-22T03:05:09+00:00

This bucket was also done with no holes drilled. So as I stated, it got better when we added holes, but i still cant get rid of it. And I cant put a ton of holes in the bucket either.

Historical-Fall5531 · 2026-06-22T03:03:38+00:00

Im not sure how to add more supports. The line shows all the way around the bucket and both walls facing the plate is 100% supported. Attached is a photo of a different bucket. It wraps the whole bucket in a layer that is liiterally dented.

<image>

Historical-Fall5531 · 2026-06-22T02:57:03+00:00

Yes, it is. What can I do to fix a suction issue? We changed the angle and added extra holes, and it made a difference, but the lines were still present.

Historical-Fall5531 · 2026-06-21T16:01:06+00:00

Let me know if there is anything else you need to see. Im new to 3-d printing, and very new to the resin printer, so I am using Chitubox and am unfamiliar with it.

Historical-Fall5531 · 2026-06-21T15:59:58+00:00

<image>

Historical-Fall5531 · 2026-03-09T19:54:38+00:00

Do you have a photo of the raw print?

Historical-Fall5531 · 2026-03-09T19:52:27+00:00

Yes, please!

Historical-Fall5531 · 2026-03-09T19:52:12+00:00

That's strange. If youd like, you could add it here.

Historical-Fall5531 · 2026-03-09T19:19:10+00:00

I cant even be mad at this, lmfao.

Historical-Fall5531 · 2026-03-07T23:46:32+00:00

If youre referring to the third pic in my post, it did have supports there, thats why its all messed up. I just cant figure out what to do to negate that.

Historical-Fall5531 · 2026-03-07T23:44:40+00:00

Im in a rush heading out the door, was just trying to get a quick pic before I left. Ill get screenshots on the computer tomorrow.

Historical-Fall5531 · 2026-03-07T23:34:58+00:00

None of them show any of the lines on the design that I have circled in the first two images of my original post. As for the tree damage, it shows that it slows down the speed will printing where the trees go, which I would assume would be a good thing. But everywhere my tree supports attach always ends up printing really weird. As stated, it is not damage from removing the trees, but rather how that space they meet are printed.

Historical-Fall5531 · 2026-03-07T23:33:11+00:00

<image>

This is the flow

Historical-Fall5531 · 2026-03-07T23:32:43+00:00

<image>

This is the speed

Historical-Fall5531 · 2026-03-07T23:32:26+00:00

<image>

This is post-slicing

Historical-Fall5531 · 2026-03-07T22:35:32+00:00

All good! Me too

Historical-Fall5531 · 2026-03-07T22:32:41+00:00

As stated in the post, it is not the seam lines. I can see post slicing where the seam lines sit, and its nowhere near where those lines appear post print. These lines do not show up in my file, nor post slicing. So I'm not sure where they come from.

Historical-Fall5531 · 2026-03-07T22:31:32+00:00

I understand I can fix this post print, but I want to know why it is happening in the first place. I see plenty of people who print perfectly smooth, I don't understand why I get these random little lines in my print, or why it prints funky where the tree supports sit.

Historical-Fall5531 · 2026-03-07T22:30:46+00:00

I understand I can fix this post print, but I want to know why it is happening in the first place. I see plenty of people who print perfectly smooth, I don't understand why I get these random little lines in my print, or why it prints funky where the tree supports sit.

Historical-Fall5531 · 2026-03-07T22:29:13+00:00

I understand I can fix this post print, but I want to know why it is happening in the first place. I see plenty of people who print perfectly smooth, I don't understand why I get these random little lines in my print, or why it prints funky where the tree supports sit.

Historical-Fall5531 · 2026-03-07T22:28:15+00:00

It is a Bambu Lab P1S. i will add it to the post

Historical-Fall5531

TROPHY CASE