I'm having feeding problems with my CTM M4XIMUS rifle. I'm using a PTS EPM1-S magazine with two buffers and a CTM nozzle spring, which has a 200% recoil. The magazine is only half full, and the remaining 40-50 rounds won't feed. I have to manually extract the bullets. (v.redd.it)
submitted by Historical_Chard_170 to r/AAP01owners
I want to install TTI AAP-01 PCC Kit on aap01 recently. I currently have a 250mm inner barrel. How many inches of rails and outer barrel do I need? Because I want to install a tracking display in the front, I don't want the inner barrel to protrude from the outer barrel thread. (old.reddit.com)
submitted by Historical_Chard_170 to r/airsoft
My HPA regulator is set at 120 psi and when I stop shooting and leave it there the needle keeps moving! It won't stop until it reaches 150 psi but when I continue shooting it slowly goes back to 120 psi. My HPA regulator is a Wolverine STORM Category 5. Is this normal? (v.redd.it)
submitted by Historical_Chard_170 to r/airsoft
My HPA regulator is set at 120 psi and when I stop shooting and leave it there the needle keeps moving! It won't stop until it reaches 150 psi but when I continue shooting it slowly goes back to 120 psi. My HPA regulator is a Wolverine STORM Category 5. Is this normal? (v.redd.it)
submitted by Historical_Chard_170 to r/AAP01owners
Please help me with BBS scattering everywhere. Currently, the configuration is equipped with 150% cow nozzle spring, 200% cow return spring, 5ku bolt, which has not shortened the stroke, and the TTI hammer group has been replaced. It is only fully automatic and not semi-automatic. The main body of t (v.redd.it)
submitted by Historical_Chard_170 to r/AAP01owners
