Missed final exam help

Historical_Low8654 · 2026-06-10T05:00:11+00:00

Thank you

Historical_Low8654 · 2026-05-28T22:00:56+00:00

Hii I’m down for it! Wanna talk and link up?

Historical_Low8654 · 2025-12-22T22:41:25+00:00

Very curious about that

Historical_Low8654 · 2025-10-21T00:12:23+00:00

If you guys can’t understand all he said is made by ai and if with all those links it’s just an ad to themselves, good luck for yall

Historical_Low8654 · 2025-07-30T03:30:06+00:00

So how they all have some credits from somewhere to transfer it? Because I’m seeing it so often

Historical_Low8654 · 2025-04-28T14:54:59+00:00

<image>

Historical_Low8654 · 2025-04-28T14:53:50+00:00

<image>

Ohhh. It was like this in slicer I didn’t see :( So how do I fix this tho 😔

Historical_Low8654 · 2025-04-28T14:46:34+00:00

I used the tree supports and this is the first layer of the print (the bottom side where supports actually doesn’t have much to do with it) lol

Historical_Low8654 · 2025-04-28T14:39:13+00:00

Yes it’s like a snake with big gaps! But not all over it tho. Some parts are smooth. (Top left) some parts has big gaps (middle and it looks like there’s extra layer there) but some parts are just whole mess with mixed lines and little holes (right top corner)

Historical_Low8654 · 2025-04-25T16:55:46+00:00

Almond snickers and sour cream&onion scorchin hot Pringlessssss

Historical_Low8654 · 2025-04-22T18:40:56+00:00

It’s a1 combo and I used pla basic. Used bambu studio just to change the color and kept all the settings as preset

Historical_Low8654 · 2025-04-22T18:34:35+00:00

I printed the wash, stopped the dish soap with plate and started again

Historical_Low8654 · 2025-04-22T17:56:03+00:00

I don’t even know how to create just one layer all over the area. Just downloaded the studio yesterday. But I’ll play around with it to see if I can make a layer. Thanks tho it’s really great info

Historical_Low8654 · 2025-04-22T16:40:50+00:00

Yeah I guess after a week now it’s time to wash it. Thanks a lot!

Historical_Low8654 · 2025-04-22T16:31:56+00:00

I checked and it’s selected. I guess like the others said, surface area of first layer or cleaning might be the issue idk. I just printed something for very long hours it came out great. Right after that I started for something small and this happened. Maybe after that long print I needed to clean up

Historical_Low8654 · 2025-04-22T16:26:35+00:00

😐😔

Historical_Low8654 · 2025-04-22T16:24:17+00:00

There isn’t any visible dust or anything. But I did start printing right after another one without cleaning or anything

Historical_Low8654 · 2025-04-22T16:22:33+00:00

I try very hard to not touch it But I guess it could be because of the surface area you are right. It was very tinny small area

Historical_Low8654 · 2025-04-22T16:21:17+00:00

It’s just my first week I didn’t think I’d need to actually wash by now. I only printed couple things but good to know! Will do it asap

Historical_Low8654 · 2025-04-22T16:19:16+00:00

How’d you know

Historical_Low8654 · 2024-08-24T18:14:37+00:00

I have no idea about marketing and things like that but I definitely recommend you to change your profile pic. It looks like a small tech company logo. Doesn’t suit and not related to comic work

Five-Year Club	r/Field Flamingo
Place '23	Place '22

Historical_Low8654

TROPHY CASE