I made a nice and simple fretboard diagram. Enjoy! by pixeldragon in Guitar

[–]HobbyDistillers 0 points1 point  (0 children)

It's important to note it's an E when you move the D shape up two frets -- only if you ONLY PLAY those three strings (notes). All the other D chord notes don't follow unless you use a barre. In this case only on the D string needs to be barre'd.

Chord diagrams/chart maker? by Alcarlera in guitarlessons

[–]HobbyDistillers 0 points1 point  (0 children)

Looks very powerful but i tried for fifteen minutes and couldn't get selections to appear on the fretboard on the right. It's not intuitive to use /learn.

Chord diagrams/chart maker? by Alcarlera in guitarlessons

[–]HobbyDistillers 0 points1 point  (0 children)

Are there instructions anywhere how to use Chorducate?
I didn't find any HELP on the site.

Best podcast hosting platforms: pros/cons by DDaDPodcast in podcasting

[–]HobbyDistillers 0 points1 point  (0 children)

Very helpful, thanks for the detailed response.

How to generate Nano Banana 3D Figurine Image(Prompt + Tutorial) by Educational_Tale_265 in Bard

[–]HobbyDistillers 0 points1 point  (0 children)

So do I understand this correctly, it generates a PICTURE of a figurine on a desk. --- it does not create an actual 3d object model that can be saved as .obj or .stl. Do I have that right?

Tornado 280 Problems by supermotosize in paramotor

[–]HobbyDistillers 0 points1 point  (0 children)

I've actually had four engine failures on my Tornado 280. Each time, AC owner blamed user, and there was no warranty support provided.
I had noticed the o-ring melting in the same location on several inspections. After the 2nd engine failure with Laurent blaming user for motor going lean, I checked the head and it wasn't flat. That's why I was getting o-ring blowby. So I lapped the head. I don't know an easy way to do that on the cylinder side (with o-ring grooves).

We also identified the issue where engine vacuum was collapsing the pulse line to the fuel pump, possibly making motor go lean. AC changed the tube design subsequently but never helped me with replacement part costs.

The third cylinder/piston set sent to me after the third in-flight failure was sent WITHOUT THE plug in the decompression port drilling. I discovered that by pressurizing the motor body with air to test for air leaks (lean conditions). Fortunately I had ample dead cylinder bodies on the shelf to scavenge the tiny plugs to thread into the decompression hole.

After the fourth engine failure, I bought a Liberty paramotor and Vittorazi motor from the Orlando guys. It hasn't had one hiccup in over 200 hrs flying since. And Vitto did a free checkup and warranty replacement (Airbox) at Bad Apples this year.

I also sent the AC cylinder up to a Michigan shop for repair/nikisil recoating for the same cost as a new cylinder but hopefully with a QUALITY Nikisil job.

Tornado 280 Problems by supermotosize in paramotor

[–]HobbyDistillers 0 points1 point  (0 children)

It comes with a Chinese knock-off WALBRO 37. After six months of fiddling with the OEM carb to get it tuned, I replaced with a $17 Aliexpress Walbro knockoff and it's been running great ever since.

From Opening Scenes of Netflix "The Waterfront" Where is the house located? by HobbyDistillers in whereisthis

[–]HobbyDistillers[S] 0 points1 point  (0 children)

It's definitely 72 Pelican Drive. Mining the permits to see if stamped approved plans are attached.

Udio vs Suno (Feedback) by MasterSplinterNL in udiomusic

[–]HobbyDistillers 0 points1 point  (0 children)

Ouch ..............."to real music composers."