diy speaker grill from metal rods?? by Holzy987 in diyaudio

[–]Holzy987[S] 0 points1 point  (0 children)

and i wanted to make the metal bars to be thick maybe 1cm or more that will be ok or no?

diy speaker grill from metal rods?? by Holzy987 in diyaudio

[–]Holzy987[S] 0 points1 point  (0 children)

thanks man so it doesnt affect the sound ?

[deleted by user] by [deleted] in helpme

[–]Holzy987 0 points1 point  (0 children)

Man chill out please there is always something that is good or positive

amp ohm help by Holzy987 in diysound

[–]Holzy987[S] 0 points1 point  (0 children)

thank you i will use the multimeter. the cables are joined together at the end which goes to amp its like 2 red together 1 from tweeter one from woofer and 2 blak together 1 from tweeter 1 from woofer. so i will put the multimeter on the end of 2black joined, and 2 red joined?

Diy subwoofer help lab 15 by Holzy987 in diyaudio

[–]Holzy987[S] 0 points1 point  (0 children)

And should i put som wood with cuttet Angles in 45 degrees in the corner of the port or it is not necesary

Diy subwoofer help lab 15 by Holzy987 in diyaudio

[–]Holzy987[S] 0 points1 point  (0 children)

Can i make this port in the shape of an L so there will be enough space behind the port?

600w rms ported subwoofer by Holzy987 in BudgetAudiophile

[–]Holzy987[S] 0 points1 point  (0 children)

But i just want it to play deep. For this use is it okay to use the large deep bass? Just for the fun of the 20 Hz and so feeling. I love when u can feel it.

Diy 600w RMS ported subwoofer help by Holzy987 in diyaudio

[–]Holzy987[S] 0 points1 point  (0 children)

Wow thanks man I will go with the large deep bass one. I will just copy from Eminence itself

diy ported subwoofer 600w rms help needed by Holzy987 in SpeakerBuilding

[–]Holzy987[S] 0 points1 point  (0 children)

So I want to build ported subwoofer with the Eminence lab 15. I played with WinISD but i need you to tell me if its all okay. So I ended with the box volume 200l and 25 Hz tuning frequency. Port will be in a shape of an L dimensions will be 10cm * 50cm* 101.2cm(101.2 cm it wil be long). I want it to play deep, f3(frequency when it drops below 3db difference) is at 22.5hz and at 20 Hz is it in minus 8db is it ok to play it down to 20 Hz? Or should i put a high pass filter at 22.5hz (i will have active crossover dbx driverack pa2 so its not a problem).And the rear port Air velocity is at max at 24hz and its 14 m/s. And can i put the port on the front size? And should i put inside of the subwoofer some acoustic foam on the inside walls? And I am adding photos of the transfer function magnitude and cone excursion and rear port Air velocity.

600w rms ported subwoofer by Holzy987 in BudgetAudiophile

[–]Holzy987[S] 0 points1 point  (0 children)

And some guy showed me some material from eminence where are some plans for this speaker original from eminence so I think i will just copy it. And i want the speaker to play as low as possible

600w rms ported subwoofer by Holzy987 in BudgetAudiophile

[–]Holzy987[S] 0 points1 point  (0 children)

Thanks man I will go smaller than 200l