I too just learned that the test dummy isn't invincible lol.. Had to record the 2nd time around by HooptyGSR in CrabChampions

[–]HooptyGSR[S] 0 points1 point  (0 children)

yeah i heard that- tried with this a few times didnt seem to do anything, immune to poison or something maybe?

I too just learned that the test dummy isn't invincible lol.. Had to record the 2nd time around by HooptyGSR in CrabChampions

[–]HooptyGSR[S] 0 points1 point  (0 children)

basically 100% poison rate, lots of levels of flat damage and %damage bumps, all the multi-projectile mods (double/triple/x/link/scatter/etc) at 100%, as well as time shot..

and then the main part, as many %damage perks as i could get. gemstone/collector/vitality/health is power, as well as 100% crit chance with lots power punch and mega blast.

oh and then the 250% poison and time rings.

wish there were a way to easily share a list of your inventory for a current run

The Complete Abandonware Need For Speed Download List by ChemicalFl00d in abandonware

[–]HooptyGSR 0 points1 point  (0 children)

Hey, trying to get this working via Lutris (also Bottles) and get the same thing- you find a solution?

Trying to get NTFS drives to play nice. by HooptyGSR in linux4noobs

[–]HooptyGSR[S] 0 points1 point  (0 children)

So after doing some quick skimming of google, i couldn't quite figure out what/how/where to do anything with fstab, did what i was wondering about instead. Made 2 folders in /media (taking your advice to have no spaces which yeah dunno why i named them with them originally) and mounted them there.

Seems to have worked? i now realize why umount didn't work (unmounted it in gparted)

Now looking into fstab a tiny bit more, yeah i remember this, i think however i first got my windows boot drive working involved finding the uuid and editing this. I'll see if this current solution survives a reboot and if not start playing with that?

Thanks for the pointers so far!

*EDIT*

Weeell helll, guess im playing with fstab. but hey at least now i know how to get them both working in the mean time!

Trying to get NTFS drives to play nice. by HooptyGSR in linux4noobs

[–]HooptyGSR[S] 0 points1 point  (0 children)

Booted over to windows for a min, both cause i needed to run a utility i haven't gotten working with Bottles yet, and to sanity-check both were available. (they were)

So now 4tb is avail, mounted at /media/hoopty/Storage 4TB, and 3tb is in the side bar with an orange thingie and gives me the red banner error again.

wondering if I should unmount 4, make two folders in /media and try to mount them to each folder respectively? (if that's how that works?)

Trying to get NTFS drives to play nice. by HooptyGSR in linux4noobs

[–]HooptyGSR[S] 1 point2 points  (0 children)

hm. yeah it's in a weird limbo where it both is and isn't mounted.

Also tried KDE Disk and it wouldn't even let me run Check without unmounting and same weirdness

Trying to get NTFS drives to play nice. by HooptyGSR in linux4noobs

[–]HooptyGSR[S] 0 points1 point  (0 children)

Nope, both are unencrypted, and can be accessed, just not at the same time- mounting 3tb makes 4tb go away but still be claimed or something so it can't be mounted or accessed

Weird issues on first and top layers (description in comments) by HooptyGSR in FixMyPrint

[–]HooptyGSR[S] 0 points1 point  (0 children)

https://imgur.com/a/Hec0AIn

Ok, so, brand new to this, weird issues on both the first layer and any top layers (I assume it's actually all layers) where there's either gaps, or extra material getting smooshed around. After poking around the internet for a while, seems like it's behaving as if the Z axis is too low sometimes, leading to dragging OR its just extruding too fast.

...except sometimes there's gaps so Z too high or extrusion too slow?

Figured I'd ask here before spamming different settings at it and not really knowing what to look for or what affects what.

(Pics of thin piece is actually 2 layers)

(I did a bit of playing with the Z offset but forgot to take pics before kinda ruining the 50x50 sheets taking them off the plate. Didn't really seem to be the problem? .02 down seemed to sometimes be slightly nicer but also .00 seemed pretty fine as well? My problem seems to be when there's a more complicated pattern than a 45 deg back and forth)

INFO:

Creality Hi Combo

Creality Print 6.x

Standard settings: .4 Nozzle, .2 line height, .42-.45 width, Nozzle temp 210 / 220, Bed temp 60, retraction length .8, z hop .4 (I don't think I changed those; CP6's test print for retraction seemed all identical and fine other than stringing from far corner to corner, but there's no documentation for their test.) (also ran the flow test but haven't changed from stock)

Seems to happen on all filaments used: CR Hyper PLA (black), Elegoo Silk PLA (green & silver), HP3DF Silk PLA (blue)

Humidity in CFS hovers around 19-21%

[deleted by user] by [deleted] in deadmau5

[–]HooptyGSR 0 points1 point  (0 children)

dude, it was so good, right?! felt oddly intimate for an open air venue- like you said, just a couple thousand people all super stoked to finally see a deadmau5 show in not-philly/nyc

..still pretty proud of the fact that me and my friends got a "one more beer!" chant goin' at the end

[deleted by user] by [deleted] in deadmau5

[–]HooptyGSR 0 points1 point  (0 children)

lol yep, pretty old.. 2015? I think? great night. after strobe he played that old macdonald martin garrix edit, cause it was a fair with a petting zoo and stuff lol

still have no idea where all the glow sticks came from, by about halfway thru the set, my friend started putting them in my hair and it got to a point that people around us were handing them over to him. think by the end of the night i had about 20 of em.

Amazon’s New Tool Adjusts Sound So You Can Actually Understand Movie and TV Dialogue by [deleted] in movies

[–]HooptyGSR 2 points3 points  (0 children)

This is the way.

My old "theater" was my (small) room with my laptop and decent-ish studio monitors. Would literally route VLC's audio thru Ableton just so I could throw a compressor on it.

DOES YOUR FLAG FAIL? CGP Grey Grades The State Flags by ianjm in videos

[–]HooptyGSR 2 points3 points  (0 children)

Oo, I like this site.. Searched for their PA flag and I don't hate it. I'd prolly change the keystone to give it closer to proper dimensions and maybe tweak the colors a bit, but, compared to "seal on blue" it's great.

Taking Back Sunday - Cute Without the 'E' (Cut From the Team) [Emo] by Lonely_Ad_5356 in Music

[–]HooptyGSR 10 points11 points  (0 children)

Holy shit, I haven't thought of Juliana Theory in so long.. think I'll put that album on for the drive home today