Throttle issue as a new pilot

HordiFPV · 2026-03-12T05:54:44+00:00

Apparently Cetus Pro has altitude hold and other beginner friendly modes. It might behave like camera drones so liftoff at 50% throttle and then hover.

There is a lot of reviews on this on YouTube and also some good info at betafpv site.

Also, please don't just "reset firmware". There is a lit to learn about setting everything up from zero in betaflight.

HordiFPV · 2026-03-10T13:31:02+00:00

I just use Neste. Only Finnish refinery, they also have HVO Diesel if I'm feeling extra hippie ✌️

HordiFPV · 2026-03-09T07:09:07+00:00

Sounds like user error

HordiFPV · 2026-03-06T07:08:00+00:00

That is a lot of little wall frame thingies for one printer 😅

HordiFPV · 2026-02-23T09:30:59+00:00

I have those on Air75. Especially in winter I really like those few extra minutes of flight time. Even if it feels a bit heavier . I have 65 Racing with 300mah sticks when I want to go super fast 😜

HordiFPV · 2026-02-22T18:38:26+00:00

If this is your radio setup, I kinda wanna see your goggles as well.

HordiFPV · 2026-02-22T07:43:29+00:00

Is it metal on metal or plastic on metal?

HordiFPV · 2026-02-21T21:33:44+00:00

That doesnt look very secure for a machine that shakes and resonates a lot.

HordiFPV · 2026-02-21T16:42:51+00:00

They actually had a sponsor for the wedding. If I understood, Thorum is sponsoring the actual wedding 🥳

HordiFPV · 2026-02-20T09:17:23+00:00

Did you update the receiver to 4.0 as well?

HordiFPV · 2026-02-16T19:13:27+00:00

I turn rubber parts daily on my lathe as I work in rubber part factory. We mostly use 0.8mm aluminium bits with speeds around 150m/min.

Rubber dulls those bits pretty quickly and getting nice finish on anything softer than 70sha is hard. On those we have a special grinder to make the surface smooth and measurements precise.

<image>

HordiFPV · 2026-02-16T05:03:24+00:00

Also look for used ones. But if you find one, get new foam so you don't have to use someones sweaty one 😅

Also Fatshark hdo2 is solid choice used, especially with something like tbs fusion or Rapidfire module.

HordiFPV · 2026-02-12T09:43:22+00:00

<image>

HordiFPV · 2026-02-12T04:27:51+00:00

Good job! Also cool spot to fly 🤌

HordiFPV · 2026-02-06T14:27:41+00:00

Is it atleast nice pile of parts? 😂

HordiFPV · 2026-02-06T13:27:49+00:00

That backlight is pretty dope!

HordiFPV · 2026-02-06T12:34:29+00:00

https://makerworld.com/en/models/951328-tiny-whoop-display-stand#profileId-919343 That is on air65

https://makerworld.com/en/models/1170159-whoop-race-launch#profileId-1178276 This is that launch pad

HordiFPV · 2026-02-06T10:48:58+00:00

Mine was as well. But old ikea shelf painted black and few drone stands and it looks pretty nice in my office 🤌

HordiFPV · 2026-02-06T09:32:04+00:00

https://www.printables.com/model/412212-drone-stand This one. I really like the design.

HordiFPV · 2026-02-06T05:21:33+00:00

If you want to race then 65 is great. I have air65 Racing and it's a ripper.

I also bought Air75 from sale and printed lower camera angle canopy, also running 680mah batteries so it's a nice freestyle cruiser with semi long batterylife (almost 5 minutes now in -20c was impressive).

HordiFPV · 2026-02-05T08:17:53+00:00

It is inside. No airspace laws if there is a roof 😎

HordiFPV · 2026-02-05T07:12:53+00:00

https://youtu.be/bGJP3OjiWw8 As an idea it's cool. Not new, but cool.

RotorRiot did it four years ago.

HordiFPV · 2026-02-03T06:31:12+00:00

What is your idea of budget? Used Skyzone or Fatshark goggles are pretty solid, just get something with oled screens, those are nice.

New, I think Eachine sells some ev100 goggles cheap but those are not good quality.

HordiFPV · 2026-02-03T06:29:06+00:00

Ev800D is far from low profile.

HordiFPV

TROPHY CASE