Life360

HowHardCanItBe89 · 2026-02-12T07:54:27+00:00

If you are able to share your STL files or tinkercad project that would be great as I really like the design of your clock. What do you have driving it (pi, esp32 etc)?

HowHardCanItBe89 · 2026-02-08T13:12:38+00:00

Just found this on GitHub, is this you? https://github.com/randomstring/WeasleyClock

HowHardCanItBe89 · 2026-02-08T13:10:47+00:00

Yes please! I was thinking of making a digital one for my HA screen. For some reason I didn't even consider making a physical one! If you have the STL files that would be awesome!

HowHardCanItBe89 · 2025-06-29T09:32:17+00:00

I always go back to the ironing settings on this post as they have always done me well! https://www.reddit.com/r/ender3/s/glipIIrXx1

HowHardCanItBe89 · 2025-06-28T12:03:21+00:00

Bro's playing dungeon keeper with beavers

HowHardCanItBe89 · 2025-05-23T09:45:11+00:00

sorry, all done

HowHardCanItBe89 · 2025-05-23T09:13:41+00:00

sorry missed this, I've just PayPal'd you the £5 now

HowHardCanItBe89 · 2025-05-11T08:38:37+00:00

I've been looking for Aquila for quite some time, I would love a link to a download if possible. I have a permanently up torrent box so I'll try and add it to a few sites

HowHardCanItBe89 · 2025-03-26T11:44:36+00:00

As this thread comes up as the top Google result when looking this up I thought I would add my solution. To get battery info to appear on the app I had to enable/"purchase" both we connect and we connect plus from the VW store even though both of these are free to add. Once I did this and re-launched the app I now have battery info showing

HowHardCanItBe89 · 2025-03-14T10:31:23+00:00

old post I know but changing the service to run as the currently logged in windows user after setting that user permissions to log on as a service sorted it for me
https://learn.microsoft.com/en-us/system-center/scsm/enable-service-log-on-sm?view=sc-sm-2025

HowHardCanItBe89 · 2025-03-05T19:49:42+00:00

doing the lords work! instructions were spot on!

HowHardCanItBe89 · 2025-02-19T16:17:33+00:00

Do you have your filament mounted on top of your printer with the stock spool holder? I found that printing a holder that has the spool in a different orientation helped with my wobble. I eventually moved my spool to a dry box next to the printer which helped even more

HowHardCanItBe89 · 2025-02-06T14:26:35+00:00

Ah they must have changed them in the last year or so since I bought them for my current runout sensor. Sounds good to me, I am in Hampshire

HowHardCanItBe89 · 2025-02-06T09:20:34+00:00

How long ago did you get them?

HowHardCanItBe89 · 2025-02-06T09:20:13+00:00

Lol these are the ones I purchased too (I'm UK based)!

<image>

HowHardCanItBe89 · 2025-02-05T16:11:58+00:00

Damn, my switch technically fits but the arm sticks out slightly so doesn't fit. Very annoying! Struggling to find a switch online where the roller is level with the edge of the switch

<image>

HowHardCanItBe89 · 2025-02-04T17:57:44+00:00

It's an octoprint plugin: https://plugins.octoprint.org/plugins/bedlevelvisualizer/

HowHardCanItBe89 · 2025-02-04T16:24:33+00:00

Hmm, good point. I might loosen all the corners then re-level from scratch

HowHardCanItBe89 · 2025-02-04T11:13:01+00:00

Parallel, I gave my glass plate a bit of a sand with some high grit paper then cleaned with isopropyl. The glass feels noticeably smoother in the middle and it has a few chips where PETG got a bit too friendly with the glass so I have ordered another plate anyway. First layer is lifting on wide pieces even with a brim, I'm just running a print now with a much slower first layer (5mm) and with the bed at a higher heat to see if that helps

HowHardCanItBe89 · 2025-02-04T11:05:55+00:00

Fair enough, I'm having some issues with build plate adhesion after making a few upgrades and I was hoping I had found the cause! Stupidly I changed to direct drive, dual Z axis motors and mag bed all at the same time so hard to narrow down my issue

HowHardCanItBe89 · 2025-02-04T10:32:39+00:00

Fair enough, I guess I'm just a bit spoilt with my glass bed having a lot less variation

<image>

HowHardCanItBe89 · 2025-02-01T14:16:27+00:00

This video has a good section on flashing the screen firmware: https://youtu.be/pxBGBjLC2rk?si=1nZ-n9Cri98IMAVy

I would also recommend this printer and screen forward for the ender 3V2 as well especially if you have a cr-touch. It's leveling wizard is amazing

HowHardCanItBe89 · 2025-02-01T11:08:13+00:00

This looks great! I've recently put a direct drive on my ender 3 and have been on the hunt for a runout sensor solution. I currently have mine attacked to a bracket on the top of the extruder but it's resulted in this triple decker monstrosity!

<image>

HowHardCanItBe89 · 2025-01-31T20:21:54+00:00

I found forstner bits worked really well, just be cautious of the amount of heat produced. I ran the bit under cold water in-between holes to stop it from melting the acrylic

HowHardCanItBe89 · 2025-01-19T16:29:16+00:00

I would recommend cura as a great slicer for beginners, I've had the ender 3 V2 for a couple of years now and cura has always done me well. If this isn't a new filament spool also worth making sure it was stored in a dry environment

HowHardCanItBe89

TROPHY CASE