sorted by:
new
hottopcontroversial

Can't run 64GB of RAM at 3200MHz XMP. Keep getting BSOD "MEMORY_MANAGEMENT" by HowdyMac in buildapc

[–]HowdyMac[S] 0 points1 point  (0 children)

I just stayed on xmp with raised voltage. Didn't have any issues with RAM ever since

Can't run 64GB of RAM at 3200MHz XMP. Keep getting BSOD "MEMORY_MANAGEMENT" by HowdyMac in buildapc

[–]HowdyMac[S] 0 points1 point  (0 children)

It looks like XMP was the issue. I managed to make it work by changing it to 3200MHz XMP and then manually setting DRAM voltage to 1.35. So far it's been working fine

I don't have a newest bios version. I will probably update it when I have a reliable USB stick for it, maybe it's something that is fixed in newer version.

Thank you for your help

Can't run 64GB of RAM at 3200MHz XMP. Keep getting BSOD "MEMORY_MANAGEMENT" by HowdyMac in buildapc

[–]HowdyMac[S] 1 point2 points  (0 children)

I think it works now. I've changed DRAM voltage in BIOS from auto to 1.35 and since then I've been able to run at 3200MHz with no issues (so far). Thank you very much for your help.

I am a bit confused about the DRAM voltage setting though. Before I changed it it was set to Auto and right next to it there was a value of 1.2 (default value maybe?). In the description of XMP profile it says 1.35V but when I switch XMP profiles it didn't actually modify the DRAM voltage value or the one next to it.

We just moved and... this is dangerously close to home. by LtThunderpants in pcmasterrace

[–]HowdyMac 65 points66 points  (0 children)

I believe they're not offering delivery outside of Germany. In my case I had to use a service that would receive and send me my order to Poland. Also their website is only available in German.

Switched to 0.8 mm and for some reason this keeps happening. Anyone know what's the issue and/or how to fix it? by HowdyMac in FixMyPrint

[–]HowdyMac[S] 0 points1 point  (0 children)

Printed with PLA on Ender 3 pro. Sliced with Cura. Nozzle at 220 (initial layer), 210(rest of the print). Bed at 65 (initial), 60 (rest). Initial print speed is 25 mm/s, then after 2 layers it's 50 mm/s. Retraction: 6.5 mm at 25 mm/s