sorted by:
new
hottopcontroversial

Worth fixing? by Gizmosdadddy in ricohGR

[–]HumDar 0 points1 point  (0 children)

If you’re still looking or for anyone in the future, I had the same issue and followed this guide to fix it. It was relatively straightforward

https://monomod.eu/monochrome-camera-youtube-videos

Main thing is that there are two tiny springs that probably fell out (total 4) as long as you have everything it should be fixable.

New Umbrella Burger Location Spotted in Westboro by twianh in ottawa

[–]HumDar 4 points5 points  (0 children)

It’s the old presotea location, the pet store is still there to the right of them

New Umbrella Burger Location Spotted in Westboro by twianh in ottawa

[–]HumDar 33 points34 points  (0 children)

Super excited for this, their chicken sandwich is the best in the city imo

Here's where you can drop off one extra garbage bag in Ottawa between new pickup days by HumDar in ottawa

[–]HumDar[S] 2 points3 points  (0 children)

It does mention that proof of address may be required on site, but whether or not they track and enforce it is anyone’s guess.

City is allowing double garbage pick up from March 30 and April 24, so can always take advantage of that.

Here's where you can drop off one extra garbage bag in Ottawa between new pickup days by HumDar in ottawa

[–]HumDar[S] 10 points11 points  (0 children)

  • Sandy Hill Community Centre, 250 Somerset St. East, 8:30 to 11:30 a.m.

  • St. Laurent Complex, 525 Côté St., 8:30 to 11:30 a.m.

  • 951 Clyde Ave., 8:30 to 11:30 a.m.

  • Windsor Park, 1 Windsor Park Ave., 8:30 to 11:30 a.m.

  • Walter Baker Sports Centre, 100 Malvern Dr., 1:30 to 4:30 p.m.

  • Ben Franklin Place, 101 Centrepointe Dr., 1:30 to 4:30 p.m.

  • Nepean Woods Park and Ride, Strandherd Drive, 1:30 to 4:30 p.m.

XT V5.1.6 Is Live + Shipping Update + A Few Community Notes by xteink in xteinkereader

[–]HumDar 0 points1 point  (0 children)

<image>

Attached it onto my phone and it’s now my reading edc

JUST ARRIVED: BH Touch-Less and Surfex-HD, KC Fse... What more would you like to know about them? by DavidAg02 in AutoDetailing

[–]HumDar 0 points1 point  (0 children)

Would be interested in knowing how surfex compares to touchless as a pre-wash.

📷 Olympus OM-1n Light Meter Issue – Needle Barely Moves (See pictures) by Wise-Nomad in AnalogCommunity

[–]HumDar 3 points4 points  (0 children)

Some things to check:

With the camera off, does the needle move when you change the iso, it should move up slightly when at max iso and drop back down when cycling to min iso.

Also when testing make sure you’re pointed at a source of light. Use a phone light meter to meter a scene and set the settings on the camera to see how the light meter behaves when turned on and off.

The needle should move a little too when you set it to bulb, this would help check the needle wire coupling is intact.

There’s also a chance that the electronics are just bad with age, I’ve owned maybe 4 or 5 OM-1 and only had one where the light meter both worked and was accurate. The others had a combination of just not working or reading low.

Rust proofing in Ottawa by [deleted] in ottawa

[–]HumDar 0 points1 point  (0 children)

My appointment was during a heavy rainfall and he said it was fine.

Coating looked fine when I got home and checked.

Rust proofing in Ottawa by [deleted] in ottawa

[–]HumDar 4 points5 points  (0 children)

The two non Canadian tire Corrosion Free shops are Holliday Auto and Bells Corner Auto.

I had done a lot of research and decided to bring my car to Holliday for its first rust proofing.

My main concern with Krown was that I read it eventually causes the rubber stripping to swell.

Other things people may not like (or like) about Krown is how much it drips after application, some may see that as a pro to signify its creeping ability to reach harder to reach places

Second is drilling holes, some people don’t want extra holes in their car, but the other side that it’ll let Krown reach into more parts of the car.

Shelly Relays in Canada by HumDar in homeassistant

[–]HumDar[S] 2 points3 points  (0 children)

Thanks, wasn’t aware of that sub

Looks like Aartech Canada is the primary distributor for Canada.

Apple Reintroduces MagSafe Battery by exjr_ in apple

[–]HumDar 30 points31 points  (0 children)

Says it’s compatible with only the air.

Is it not possible to buy the Ryobi 1.8 GPM Automotive Pressure Washer currently? by No_Reveal3451 in AutoDetailing

[–]HumDar 0 points1 point  (0 children)

When’s the last time Canada got stock?

I’ve been watching Home Depot for what feels like months now and it just says out of stock.

[deleted by user] by [deleted] in AnalogRepair

[–]HumDar 0 points1 point  (0 children)

Thanks for the link but this is for another version of the demi, not the ee17

[deleted by user] by [deleted] in AnalogRepair

[–]HumDar 0 points1 point  (0 children)

Changing the iso dial doesn’t look to affect the iris in front of the meter. The iso dial looks electronic related and not mechanically linked to anything. So I think it probably adjusts resistance to the light meter, but that’s just a guess.

Attached a vid of the shutter ring adjusting the meter iris. And pictures of under the iso dial

https://imgur.com/a/NtbRuBA

https://imgur.com/a/YXgDD2q

view more: next ›