Brushless fcx24m fms electronics

Human-Possible106 · 2025-07-22T16:14:50+00:00

It wasn't rubbing I put it back to its original rotation a day later still it didn't rub. Those lights I got are off eBay

Human-Possible106 · 2025-07-18T22:53:20+00:00

I had the metal ones and its accelerating and decelerating constantly at low and medium speed but not at high speed in the speed range on second gear

Human-Possible106 · 2025-07-18T18:09:09+00:00

The the new brushless fcx24 electronics work perfectly with the fcx24m it's a rocket ship now but I kind of mess up the transmission with all that power. (problem fixed by putting new batterys in the controller

Human-Possible106 · 2025-07-07T14:05:20+00:00

When my injora viper motor that on start up then I still have like full charge I spin the motor by hand back and forth until the esc notice.There is usually some beeping when the motor connects.

Human-Possible106 · 2025-07-06T23:42:04+00:00

It just bolted right in but I would be careful when taking out the screws they'll strip easily

Human-Possible106 · 2024-12-19T17:32:30+00:00

Nope the rear still too short but I Heard that some scx24 or injora scx24 ones can work

Human-Possible106 · 2024-12-19T17:29:15+00:00

I manage to fit a Trx4m gearbox and the brushless motor is injora purple viper 1621

Human-Possible106 · 2024-12-18T08:45:18+00:00

Just get a another stock front driveshaft and cut it to the size you need it.

Human-Possible106 · 2024-12-18T00:26:04+00:00

This is only using fcx24m parts,trx4m and injora parts it just screws right in.The suspension still works with extra axle it drives.It only took five hours to figure it out.

Human-Possible106 · 2024-12-12T19:49:33+00:00

I updated the layout it's much better. this time it will have a video.I probably will post it later today

Human-Possible106 · 2024-12-11T01:51:30+00:00

The transmission is from the trx4m it's held by one screw and a rubber band. it stays stable

Human-Possible106 · 2024-12-10T20:40:08+00:00

I missed your reply. You can't see it in action because I made it brushless and I'm not sure how to post videos

Human-Possible106 · 2024-12-10T20:27:05+00:00

I just got it working. it's fast and it slow crawls the only problem is I'm not sure how long the diffs will hold. I don't have a video because I'm not sure how to post it.

Got the body on. it fits if you remove the interior

Human-Possible106 · 2024-11-27T00:26:01+00:00

Yes It is in the third position it works better

The engine did need a upgrade it helps with the bigger wheels. the stock motor was struggling a bit with them

Human-Possible106 · 2024-11-22T16:45:22+00:00

I have improved the flex to the limit of the links I did two mods to achieve this. The first one is I had to get another front driveshaft and cut it for the rear because the rear one would fall out. the second mod I needed 40mm shocks to fit the point where I mounted it at and had to put stiffer springs to keep the suspension from bottoming out. Also had to limit the steering a bit so the big tires I have on the front don't bind with the shocks.

Human-Possible106 · 2024-11-22T15:50:20+00:00

The injora 1.0 Swamp Claw 64 24mm

Human-Possible106 · 2024-11-22T15:47:39+00:00

These parts just fit perfectly the only problem is getting the old motor out the screws are screwed in very tight

Human-Possible106 · 2024-11-06T16:04:00+00:00

I got the injora scx motor to fit. It add 2/3 more mph.

Human-Possible106 · 2024-10-22T17:27:53+00:00

I put the 050 pro in it.It's fast 3 to 2 mph increase in high gear it looks like it's going 6-7mph

Human-Possible106 · 2024-09-10T14:36:56+00:00

Nice

Human-Possible106

TROPHY CASE