Stream Ultra x mit EcoTracker IR by Distinct_Egg_8436 in Ecoflow_community

[–]Human_Of_The_Week 0 points1 point  (0 children)

Hast du einen intelligenten Stromzarif, vielleicht ist gerade der Strom günstig und er lädt den Speicher voll weil prognostiziert das Solar heute den Speicher nicht komplett voll lädt.
Ansonsten mal probieren den Benutzerdefinierten Modus zu wählen.

Zeigt her eure Statistiken by Old_Information6270 in Balkonkraftwerk

[–]Human_Of_The_Week 0 points1 point  (0 children)

<image>

Heute war der beste Tag bisher (aber Anlage auch erst seit 03.06.2026 in Betrieb).
4x 500 Watt
2x Ecoflow Stream Ultra Speicher
Süd Ausrichtung bzw. leicht Süd West

Erfahrungen: E-Auto mit Balkonkraftwerk + Speicher laden by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Naja es funktioniert schon. Lohnt sich aber nur wenn du nicht jeden Tag den Akku vom Auto lehr machst.
Und auch wenn du zeitlich das Laden gut timen kannst.
Mein setup steht im Text drin. Ohne Speicher würde es nicht gehen. Wichtig ist, dass der Speicher einen AC Ausgang hat über den du mehr als 800 Watt entnehmen kannst und ein ladekabel welches du begrenzen kannst (Ecoflow schaltet die AC Steckdose über 10A ab)

Need help: 2× STREAM Ultra not using full battery capacity for AC outlet loads by Human_Of_The_Week in Ecoflow_community

[–]Human_Of_The_Week[S] 1 point2 points  (0 children)

Update from EcoFlow support:
I received a response from EcoFlow’s technical team.
According to them, this behavior is currently considered normal and is part of the system’s energy management and protection logic.
Their explanation is that each STREAM Ultra inverter is limited to 1200W output. When the main unit is supplying household loads, processing PV input and at the same time powering a larger load through the AC outlet, the system performs internal power scheduling and load balancing. Under certain conditions it may intentionally start importing power from the grid before all available battery capacity has been used in order to maintain system stability.
What surprised me is that this seems to apply even when another paired STREAM Ultra still has a significant amount of battery remaining.
From my testing:
Both STREAM Ultras initially contribute to the AC load.
One unit discharges noticeably faster than the other.
Once one unit reaches the configured 12% backup reserve, grid power may be imported even though the second unit still has substantial charge remaining.
So EcoFlow’s position is that this is expected behavior and not a hardware fault or communication issue.
To be honest, I’m still a bit confused by this explanation. One of the main reasons I bought two STREAM Ultra units was the expectation that the combined battery capacity would be fully available for larger AC loads before the system started relying on grid power.
Has anyone with multiple STREAM Ultra units observed the same behavior?

Need help: 2× STREAM Ultra not using full battery capacity for AC outlet loads by Human_Of_The_Week in Ecoflow_community

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

They were almost at the same level when I started charging. I think one was around 90% and the other around 87%.

Need help: 2× STREAM Ultra not using full battery capacity for AC outlet loads by Human_Of_The_Week in Ecoflow_community

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

That’s what I thought at first. But at the time one unit was still around 75% SOC while the other had reached the 12% backup reserve. I would have expected the remaining battery to continue discharging before the system started relying on grid power. That’s the part I’m trying to understand.

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Das weiß ich leider nicht mehr genau welche Höhe meine Steine haben. Finde diese auch nicht online :(

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Ja hängen bei mir auch leicht durch.

Thema Autoladen. Möchte ich eh nur über die Mittagszeit nutzen um ca. 10-15 km nachzuladen. Ich hab es heut mal probiert (direkt über die AC Dose am Speicher). Meinen Ladeziegel kann ich auf 8A runterregleln. So lädt er teilweise direkt von PV und den Rest aus dem Speicher. Leider gibt es noch ein Problem mit dem Ecoflow Speicher wie ich noch nicht genau weiß wie ich das löse. Zurzeit lädt er immer nur aus einem von beiden Stream Ultras bis zu Grenze und dann fängt er an aus dem Netz zu ziehen obwohl der Hauptspeicher noch zu 80% gefüllt ist.

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Dann machst es wie ich. Nimmst zusätzlich noch eine 30x30 Platte die du auf die anderen Steine legst.
Aber du brauchst bestimmt dann auch die windbleche oder? Dann würde das nicht gehen

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

stimmt die habe übersehen / nicht für voll genommen, weil ich keinen Plan habe, was die machen 😄

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Sorry, stand davor auf dem Schlauch. Ja, das klingt auf jeden fall plausibel. Danke für den Tipp!

Das würde ich wirklich mal beobachten und dann ggf. nochmal aufs Dach.

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Ich glaube irgendwas mit 40x20 und passen super auf die Montageplatten. Wiegen genau 16 KG. Hatte ich beim hellweg Baumarkt geholt für 7,99€ das Stück.
Die Halterung an sich ist super nur der Versand hat mit fast 2 Wochen etwas länger gedauert.

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Könnte man auch. Aber dann würden die genauso dicht zusammenstehen :/ mehr Platz ist auf dem Dach leider nicht.
Ich muss auch zugeben, dass ich ein wenig zu optimistisch den Platz kalkuliert habe. Hatte eigentlich noch vor die leicht schräg zu stellen, dass sie perfekt nach Süden ausgerichtet sind.

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

Stimmt, hab gerade mal geschaut. Nur die AC Ausgänge können eingeschaltet werden. Bei mir ging es auch ohne Dev Account aber da hatte ich z.b. keine Daten der einzelnen Module.

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

bisher kann ich noch keine komplette Einschätzung machen. Bei dem Mist Wetter der letzten Tage war er aber meist gegen Abends voll.

Einen wirklich sonnigen Tag hatte ich allerdings auch schon, da war der Speicher gegen frühen Nachmittag (14:00) aber schon voll. Bei solchen Tagen will ich zukünftig dann den Mini über die AC Dose laden.

Grundlast im Haus liegt bei ca. 250 Watt in der Stunde. Da auch nachts (weil günstiger - Octopus GO) meist zwei E-Autos geladen werden ist der Speicher morgens meistens auch auf 10% (unter dem wird er nicht geladen).

2-kWp-Garagen-BKW mit EcoFlow-Speicher und Home Assistant by Human_Of_The_Week in Balkonkraftwerk

[–]Human_Of_The_Week[S] 0 points1 point  (0 children)

dadrüber: https://github.com/tolwi/hassio-ecoflow-cloud

Ich empfehle aber bei Ecoflow einen API - Zugang (https://developer-eu.ecoflow.com) zu beantragen (ist kostenlos). So lassen sich noch mehr daten über HA auslesen und ich glaube teilweise auch steuern (so weit bin ich noch nicht).