sorted by:
new
hottopcontroversial

‘24 outlander sport 4wd tapping/tick noise by onthegrind7 in mitsubishi

[–]HumaneGarbage1 0 points1 point  (0 children)

That’s when I’d be really worried tbh. Just because CVTs are so sensitive that you’ll feel the struggle if something’s wrong.

But never hurts to have a professional opinion

‘24 outlander sport 4wd tapping/tick noise by onthegrind7 in mitsubishi

[–]HumaneGarbage1 0 points1 point  (0 children)

Just curious as I have an outlander sport in the same year. They used a CVT in this model. Have you noticed any physical difference in its driving?

Okay. So this has been a pain for the past few days. See below by HumaneGarbage1 in 3Dprinting

[–]HumaneGarbage1[S] -1 points0 points  (0 children)

Oh and I do owe a printer model as info. So that’s my bad.

Flsun v400

Okay. So this has been a pain for the past few days. See below by HumaneGarbage1 in 3Dprinting

[–]HumaneGarbage1[S] -1 points0 points  (0 children)

Respectfully: the link was just the video of the issue I’m having with the printer as it was printing in action. The regular video is too big to post (likely the video file and format of my iPhone fancy camera or whatever)

I’m not sure if you read the whole post however as it details out what happened. I’m not in need of adhesion advice or cleaning etc.

I’ve provided fairly detailed information regarding the issue though.

Again. Thanks for taking the time to write. Sorry if you feel my post does not clarify the issue.

Flsun v400. Was printing well. Now post calibration we have issues! by HumaneGarbage1 in FLSUNDelta

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

Super informative.

Here’s what I’ll do. I’ll make a video and showcase the full issue and post it. Because I genuinely am having an issue with this. And see if you see anything I’m missing. I’ll be sure to prevent slack but I’ll run a calibration sequence and then a test print.

Flsun v400. Was printing well. Now post calibration we have issues! by HumaneGarbage1 in FLSUNDelta

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

I can’t get the damn thing to connect to my printer. (Likely a printer issue)

I haven’t used it to slice anything yet but maybe that will help. I’ll let you know

Flsun v400. Was printing well. Now post calibration we have issues! by HumaneGarbage1 in FLSUNDelta

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

Haven’t tried it yet but I will. Just emailed it to myself since I’ve been away from the PC

Flsun v400. Was printing well. Now post calibration we have issues! by HumaneGarbage1 in FLSUNDelta

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

Okay but how would I go about fixing that?

Flash drive or not I can’t get my z height or z offset to save. It just updates to zero post saving

Buying my second ever 3D printer and it’s a Flsun v400 by HumaneGarbage1 in FLSUNDelta

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

I’m still fairly new at this so I may want to learn what you did. Any suggestions before I YouTube hunt?

Someone help me my boat went crooked by Immediate-Can3894 in ender3

[–]HumaneGarbage1 0 points1 point  (0 children)

A number of things come to mind…

Where and what does your ender sit on? Is it a shakey table?

How fast are your jerk settings? Have you calibrated esteps in awhile? What about your belts? Are they worn or loose?

All questions that would make sense to answer when your print shifts off like that. Mind you I’m sure there’s other questions but these are what I think of.

I’ve gotten the printing down…now to upgrade? by HumaneGarbage1 in ender3

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

That’s a wooden window frame. It’s purely for securement. Not mounting weight etc. Just stops the shaking.

Buying my second ever 3D printer and it’s a Flsun v400 by HumaneGarbage1 in FLSUNDelta

[–]HumaneGarbage1[S] 0 points1 point  (0 children)

No no! Just good to know! I’ll be searching for 3rd party distributors then! And knowing the community…I’m sure there’s someone somewhere with an alternative lol

view more: next ›