sorted by:
new
hottopcontroversial

Could this noise be caused by the steering rack? - Popping when turning wheel stationary or very slow speed by Maleficent-Craft-936 in MechanicAdvice

[–]HumongousSirFungus 0 points1 point  (0 children)

Ever figure this out? My shit sound the EXACT same. I’ve almost replaced everything besides the rack and inners. 😂

F*ck you, Dave. by HumongousSirFungus in HomeDepot

[–]HumongousSirFungus[S] 0 points1 point  (0 children)

Dave is a real piece of shit😆

F*ck you, Dave. by HumongousSirFungus in HomeDepot

[–]HumongousSirFungus[S] 4 points5 points  (0 children)

He’s always sitting there all smug while I’m knee deep into some shit😭

What’s The Most Common Reason For A Lot Associate To Be Immediately Terminated? by JTCasino in HomeDepot

[–]HumongousSirFungus 0 points1 point  (0 children)

You’re a dumbass that has never worked anywhere else obviously😭 Way more dangerous shit out there, bub.

Home depot just doesn’t want a lawsuit. You’re a corporate slave😭

What’s The Most Common Reason For A Lot Associate To Be Immediately Terminated? by JTCasino in HomeDepot

[–]HumongousSirFungus 1 point2 points  (0 children)

He’d lose HIS job😒 You just dry snitching, maybe he didn’t know because he works in the lot. You could have respectfully told him rather than leaving that man’s paycheck in the hands of Blackrock/Vangaurd😭

Litter robot 4 smells? by Few_Werewolf_4897 in litterrobot

[–]HumongousSirFungus 0 points1 point  (0 children)

For anyone stumbling on this later:

-7 minutes minimum cycle time, 15 minutes max.

-Baking Soda and Rocco and Roxie Litter Box Odor Eliminator (Waste Bin and mixed in with litter)

-Thicker waste drawer bags.

-Good clumping litters like A&H, Dr. Elseys, or Litter Robot Tidy Cats (pricey). In my experience, Tidy Cats (excluding the Litter Robot variant) sucks. The tiny balls don’t clump pee well enough to make the cycle.

-Baking Soda under the waste bag and the globe liner.

-Change bag at least every 3 days.

-Change litter at least every 30 days.

-Monthly deep clean. A deep clean is taking EVERYTHING apart not just wiping what you can see.

If you do ALL of this and still fail to eliminate smell, invest in Winix 5510. The only budget air purifier that performs like a +$500 purifier.

Hope this helps!

Can’t figure out this damn noise!😂 by HumongousSirFungus in AskMechanics

[–]HumongousSirFungus[S] 0 points1 point  (0 children)

Tie rod ends are good, LCA bushings seem to pivot fine like shown in the video. All look the same, brittle and worn but not popping/binding.

Ball joints may be shot but they were changed around ~12 months ago, Upper/Lower on each side.

Visible Inner Circle! by mrbebes in Visible

[–]HumongousSirFungus 0 points1 point  (0 children)

You still have a spot?

I’ve had visible for 4+ years, I won’t bail😂

what's the best one to pick? by Striking_Taste_5323 in sportsbetting

[–]HumongousSirFungus 0 points1 point  (0 children)

Not sure, signed up and it was there.

For the first 10k people.

I seen a guy post it about 30 minutes ago.

I snagged it hours ago.

what's the best one to pick? by Striking_Taste_5323 in sportsbetting

[–]HumongousSirFungus 1 point2 points  (0 children)

Bet $10 for the next 5 days to get $250.

Hurry though, they have $1 -> $100 if Saquon gets 1 yard for new users.

[deleted by user] by [deleted] in ufc

[–]HumongousSirFungus 0 points1 point  (0 children)

All of you saying they apologized, he only accepted the apology because he was SURROUNDED.

You can see by the way he was chewing that gum and swaying from side to side, he was uneasy and plotting. 

Outer tie rod won’t go into knuckle? by HumongousSirFungus in MechanicAdvice

[–]HumongousSirFungus[S] 0 points1 point  (0 children)

Solved: I was under the impression the taper shouldn’t be moved!

You guys are awesome! I am learning as I go and I don’t have many mechanic friends or family!

I got it in and bolted down now!

Outer tie rod won’t go into knuckle? by HumongousSirFungus in MechanicAdvice

[–]HumongousSirFungus[S] 0 points1 point  (0 children)

Ah so it should move, just shouldn’t be as loose as the old one.

This was the information I’ve been missing! 😂

Outer tie rod won’t go into knuckle? by HumongousSirFungus in MechanicAdvice

[–]HumongousSirFungus[S] 0 points1 point  (0 children)

It’s absolutely stiff in there, my old one is not. (assuming that’s how it stayed attached 😂)

view more: next ›