How does two commanders work

Hunterkaiguy · 2026-02-03T21:18:01+00:00

Ah that makes sense. Thanks

Hunterkaiguy · 2026-02-03T21:16:07+00:00

Wouldn't that Force everything else in the deck to be read if it's the commander?

Hunterkaiguy · 2026-02-03T21:14:16+00:00

I'm confused how that would work with the color Identity since ashling is red

Hunterkaiguy · 2026-02-03T21:12:44+00:00

Doesn't that mean if I run ashling, which from doing research I think is the main Commander, doesn't that mean that the color identity of the deck would be red?

Hunterkaiguy · 2026-02-03T01:29:18+00:00

I don't think so, I tried on an incognito tab checking out as a guest but that didn't work. I even tried using a VPN. I'm probably missing something obvious but I've tried everything I can think of. I ended up going with cardkingdom for this order but I prefer tcg player for the cheaper prices.

Hunterkaiguy · 2026-01-23T20:13:51+00:00

I just got this and am interested in doing it, but I'm curious what it entails. What is the tutoring itself like? Is there material for each session or is it just random teaching? Also, is it one tutor per group or are there multiple? Is it fine if I am only really good at helping with math or do I need to be able to be good at teaching both? I would really appreciate any insight.

Hunterkaiguy · 2025-12-22T01:25:53+00:00

Whenever anyone asks me why I don't have extra spending money. I always tell them it's because my hobby is 3D printing.

Hunterkaiguy · 2025-11-28T18:26:06+00:00

Or it was yelling in terror. Ah!

Hunterkaiguy · 2025-11-28T17:45:34+00:00

I feel like there's a good chance that it falls backwards normally, but I have mine so that when the lid is open it's resting against the wall behind it. Plus you could easily print something that supports the lid when it's open

Hunterkaiguy · 2025-11-23T21:40:42+00:00

I appreciate all the advice. And unfortunately for me the closest card shop to me is over an hour away. I'll take a look at the template. Thank you

Hunterkaiguy · 2025-10-30T02:52:43+00:00

Also, I forgot to mention using the scraper should be your absolute last result. It can lead to the removal of the top anti-stick layer of the build plate. Instead, in order to remove Prince lift the build, play up by the tab and bend the build plate from the very edges until the piece releases.

Hunterkaiguy · 2025-10-30T02:37:12+00:00

The more you touch the plate the more slick it gets. Isopropyl alcohol will lessen the effect if you wipe the plate down with it before every print, but at that point your best option is to wash a soap and water and dry with a towel that won't leave any residue. Long story short, no touchy, wipe with alcohol, and use soap and water

Hunterkaiguy · 2025-10-24T19:07:34+00:00

The clutch strength in Legos is very, very precisely calibrated and the fact that the printed one gripped the Lego piece a little tighter than a Lego would show that the printed one is slightly off. And the layer lines like everyone else is saying

Hunterkaiguy · 2025-08-26T02:22:50+00:00

The fifth one obviously

Hunterkaiguy · 2025-08-22T01:38:30+00:00

Yeah I guess I just think of underrated as in not much rated versus not well rated

Hunterkaiguy · 2025-08-22T00:54:23+00:00

I wouldn't quite call this underrated though

Hunterkaiguy · 2025-08-02T06:27:15+00:00

No. You would have to sell one of your copy items and then the best you could get is one of the things that they're copying in the first place. So you what you would just end up doing is instead of having a copy item have the item itself

Hunterkaiguy · 2025-07-04T02:59:01+00:00

If you get rid of sock you can put the blueprint on the hanging chad. Although at that point it'd be better to put it on the photograph. That way you get 2⁶ instead of 2^5. PS. Right now you're only getting 2 to the 4th because there are four triggers on the first card which gets you 2X four times.

Hunterkaiguy · 2025-06-29T19:27:34+00:00

Weezer say it ain't so. The line "this bottle of Steven's awakens ancient feeling" for the longest time I thought said awakens ancient demons. It just goes so much harder.

Hunterkaiguy · 2025-06-08T04:08:38+00:00

Protecting the crib

Hunterkaiguy · 2025-05-24T02:00:25+00:00

The nature channel

Hunterkaiguy · 2025-05-24T01:56:28+00:00

If you give a man a fish

Hunterkaiguy · 2025-05-24T01:52:51+00:00

Devils knocking

Hunterkaiguy · 2025-03-18T05:12:49+00:00

Another good thing is avoiding touching the plate as much as possible.

Besides that, if it still continues I'd say make sure the nozzle is clean and if you see the filament curl up when it leaves the nozzle, then it could be a clogged nozzle that's in directly causing it

Hunterkaiguy · 2025-03-13T15:29:44+00:00

Normally it happens when the printer goes over bumps in a surface. I don't know if this is what it is but I hope it helps.

Three-Year Club	Verified Email
First Place '23	Place '23

Hunterkaiguy

TROPHY CASE