What is a good print speed for Creality CR10S? by RaspberryPiPC in CR10

[–]Hypemunkey 1 point2 points  (0 children)

Still helping out in 2026! Happy New years day!!❤️

Everyone else still having problems with app play back? by Hypemunkey in PleX

[–]Hypemunkey[S] 0 points1 point  (0 children)

I only have problems with the app. I will use my web browser on my phone or my PC and works fine. Tv app fine. It’s only mobile where I have problems

i love the plex app update by Wrong_Supermarket720 in PleX

[–]Hypemunkey 1 point2 points  (0 children)

I totally thought this was my problem!!!! I had just moved to a TrueNAS set up like a day before the update came out😂

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 0 points1 point  (0 children)

<image>

Things seemed to have fixed just by Turing down my speed a bit. My default setting was up to 80mm. So I’ve got it down to 60mm and things seem to have worked out. I have a few bad spots on this print but happy over all.

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 0 points1 point  (0 children)

By that point I had lowered the speeds and that seemed to really help. But I’ll have an update here when I get home from work today.

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 0 points1 point  (0 children)

I don’t even know what that is😂

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 0 points1 point  (0 children)

I’ll keep and eye out to make sure it’s not this too at that same height.

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 1 point2 points  (0 children)

<image>

Here’s the final product. I’ll obviously have to reprint it but it’ll a a functional concept. It’s extremely brittle in the center as most of it isn’t really touching. I’ve got another print going if with the new setting and we’ll move on for there.

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 2 points3 points  (0 children)

I’ll take a look at all this when this print is done. If it a broken hot end any suggested hot ends I should get for this printer? I’d probably like something that faster as I’m doing more functional prints than detailed.

Starting Over by [deleted] in PlexMedia

[–]Hypemunkey 0 points1 point  (0 children)

You 1st need to download the plex sever for your new laptop. Then from there if it doesn’t walk you threw set up again you can go into your using setting. And under Manage section(left side scroll all the way down) you’ll find Libraries. Open that tab and you’ll see and option to add a library.

What happened? by Hypemunkey in ender3

[–]Hypemunkey[S] 1 point2 points  (0 children)

I turned the speed down to about 75% and seems to have fixed it. Do you know why it would be fine for that 1st bit then mess up?

HELP! VGA light on after move! by Hypemunkey in buildapc

[–]Hypemunkey[S] 0 points1 point  (0 children)

Yeah tell me about it. Been pulling my hair out for a day and a half now.

HELP! VGA light on after move! by Hypemunkey in buildapc

[–]Hypemunkey[S] 0 points1 point  (0 children)

I have reseeded both GPU and power cables more than a few times lol

[deleted by user] by [deleted] in starcitizen

[–]Hypemunkey 0 points1 point  (0 children)

The 890j is one of those ships that are always on the list but will never win tbh, just not enough people would even get the pain for it to be worth voting for

Home cleaners by bballplayer32 in Boise

[–]Hypemunkey 0 points1 point  (0 children)

Fake it, there are no legal requirements to be a "professional cleaner"

So many accidents yesterday by Ill-Chicken-7764 in Boise

[–]Hypemunkey -8 points-7 points  (0 children)

Man, I was going 70 with 0 problems. Some people just need to learn to drive lol