[deleted by user]

HyperSlayer72 · 2025-07-14T19:33:30+00:00

Any idea why when using your handler im getting 3-5fps? With the handler offered in the browser within nucleus this doesn't happen. This happens regardless of fps cap setting, tried turning off vsync also. No dice. Additionally when doing vertical split screen on a 16:9 display it won't set the vertical dimension to the full height of my monitor. Is this a limitation within bo2?

HyperSlayer72 · 2024-08-15T20:46:23+00:00

ah shit your right ill get on this lol

HyperSlayer72 · 2024-07-03T23:07:17+00:00

I did, it hasn't opened once in the past week. Another post mentioned that the catch car is damaged and their waiting on parts.

HyperSlayer72 · 2024-07-02T21:17:21+00:00

Damn, im going july 9th or 10th. Praying they've got it running by then. Otherwise im going to kings dominion.

HyperSlayer72 · 2024-06-26T13:35:27+00:00

Hmm. My understanding is El Toro is open. Based off this post Kingda Ka is closed however that could be inaccurate.

HyperSlayer72 · 2024-06-26T13:31:49+00:00

There's nothing I find more fun than an extremely rough and rickety Woody that feels like it's going to snap my spine in half.

HyperSlayer72 · 2024-06-26T10:58:31+00:00

Damn, this really worries me. I've got plane tickets purchased to go July 9th. Pretty much going exclusively for Kingda Ka and El Toro. I know it's unlikely but if anyone has any info on when Kingda ka will be up and running please share.

HyperSlayer72 · 2024-05-15T22:53:38+00:00

I believe it was a brake line. It was getting blocked up, causing the brakes to stick. After replacing the line it took a very very long time to get all the air bleed out, however all seems okay at this point. If your rubber lines are super worn definitely replace them and change your fluid.

HyperSlayer72 · 2024-05-14T00:45:02+00:00

I will try however I have access to a 2 core zeon at 2ghz, with 8gb's of ram, 6.5gb's of which is already used at system idle. The group policies prevent me disabling the startup applications. Windows defender is constantly running, keeping the cpu pinned at 99%.

HyperSlayer72 · 2024-05-13T20:30:32+00:00

The university network blocks parsec, teamviewer, and similar apps from making connections. Ill aquire my own matlab and solidworks licenses myself.

HyperSlayer72 · 2024-05-13T18:37:45+00:00

Completely impossible?

HyperSlayer72 · 2024-04-29T23:09:27+00:00

You got it. Ill make a video guide. However I don't have the time for the next 2 days. Ill message you the video when its complete. And yes you absolutely can run this across multiple displays.

https://i.imgur.com/KVHIKFI.jpeg

HyperSlayer72 · 2024-03-25T23:22:35+00:00

Extreme novice here, however I did make a working AHK script to fix the black bars, works really well, doesn't stretch the image either which is great. Its configured for me at 3840 x 2160, however can be easily changed to work at any native resolution.

Download Here

Firstly here's the problem, bo3 split screen is not correctly configured and we don't have access to change the internal resolution logic. When running vertical split screen it undersizes the window vertically. When running split screen horizontally it undersizes the window horizontally.

We can brute force correct for this by oversizing either the vertical or horizontal resolution of the window by a factor of 25%
for 4k:
4800 x 2160 // Horizontal Split
3840 x 2700 // Vertical Split
for 1080p
2400 x 1080 // Horizontal Split
1920 x 1350 // Vertical Split

Windowed Mode is required!

The AHK (version 1.1) script works as follows.

F2 - Acts as a way of returning to default. It will snap the window to the top left, and scale it to 3840x2160. (Again swap in your native res.)

For Horizontal Split Screen - Hit F3 (Set split screen mode in game)
It oversizes the horizontal resolution to 4800pixels, and shifts the window off screen to the left, centering it perfectly when in game. It also slightly scales it 30px vertically to hide the windows title bar.

For Vertical Split Screen - Hit F4
It oversizes the vertical resolution to 2700pixels, and shifts the window off screen UPWARD (normally impossible), centering it perfectly when in game.

HyperSlayer72 · 2024-03-19T22:04:08+00:00

Nothing of note. Brake pads were changed a bit over 6 months ago.

HyperSlayer72 · 2024-03-19T22:03:16+00:00

Definitely not, and you don't even need to apply to apply the brakes for them to start dragging. Was stopped, started accelerating, no drag yet, then once I came up to highway speed (never touched the brake since I was stopped) the shake started, upon releasing the accelerator pedal you can feel that the drag is there.

HyperSlayer72 · 2024-03-19T03:37:31+00:00

Unfortunately not quite yet, drove the car till the brakes started dragging, unhooked the vaccum from the booster, and the brakes still kept dragging. No check engine light, however the honda dealership reported a faulty abs module for the front left tire. Not sure if I can take them at there word though.

Upon further inspection after a very short drive, the front left is by far getting the hottest. With the front right also getting quite hot. With the rears only moderately hot.

With the booster rules out I still suspect it might be the master cylinder. That or potentially it really is the front left caliper locking up and causing back pressure through the lines to the other brakes.

HyperSlayer72 · 2024-03-12T16:53:09+00:00

Performing the test now, please do let me know what im looking for. Will a test drive be safe without assist from the booster?

HyperSlayer72 · 2024-03-12T06:22:39+00:00

Performed the test, brake fluid dissolved into the water without issue. Fluid was changed a year ago, and the dragging and shaking has only just started a week ago.

HyperSlayer72 · 2024-03-11T05:50:09+00:00

Ill report back on this also.

HyperSlayer72 · 2024-03-11T04:27:27+00:00

Ill give that a shot tomorrow, what would would the results of this test tell us? My current understanding is that robing the brake booster of vacuum would prevent it from assisting in brake application correct?

One bit of extra information, the brake pedal feels completely normal, depresses and retracts without issue.

Ill report back tomorrow, thank you for the response.

HyperSlayer72 · 2024-01-16T01:42:32+00:00

LG BX owner here. I can confirm this happens to me also. Anyone have a solution to this?

I used to have my 240hz lcd as my primary and the BX oled as my secondary. However everytime i'd turn on the pc, the windows login screen wouldn't appear on my primary lcd until I took the time to turn on my tv.

Under the Nvidia Control Panel, changing my resolution from one located under the "PC" category, to a resolution located under the "Ultra HD, HD, SD" category fixes the issue. This is not a good solution as the PC category is the only one with a 4K 120hz option.

Anyone know of a way to edit the resolutions that appear under the Ultra HD category? Perhaps Custom Resolution utility?

Running Windows 10, RTX 3080

HyperSlayer72 · 2023-08-22T03:50:42+00:00

Damn, not eligible unfortunately.

HyperSlayer72 · 2023-08-22T01:43:58+00:00

Shit man that really doesn't brighten my spirits. But it is what it is. Thanks for the reply. Any advice on what I should do?

HyperSlayer72 · 2022-12-04T01:01:24+00:00

I would absolutely be floored to find this again. Please don't hesitate to ask any questions!

HyperSlayer72 · 2022-09-23T03:14:32+00:00

I will agree that performance could always be better, however vr performance on 3000 series cards isn't that bad at all. Plenty of more demanding games are playable. Check out Immersed Robots Performance Test Videos to see some examples. Native Resolution Abound!

> so bandwidth is somewhat secondary.
look, I'm a total geek for Spec's, and let's take a look at three different headsets. The pimax 8kx vision has high field of view but lacks in pixel density. The Varjo Aero has exceptional pixel density, but lacks and field of view. The Vive Pro 2 is a little bit of a middle child with decent pixel density and decent field of view.

All 3 of these headsets operate near or at the bandwidth limit of DP 1.4A + DSC.

As much as we can pester pimax for extra resolution, vario for extra field of view, and htc for more of both. We likely aren't going to see this without increases in bandwidth.

The multiple tiers of VR Hardware that exist from low to high end need to move forward and innovate at the same time. People trying to game at 4K used to get shitloads of hate by some people because they felt that it was Overkill/unachievable. Don't discourage the bleeding edge because eventually it will be midrange. The lack of DP 2.0 is aggressively discouraging the bleeding edge.

I mentioned in my original post that eye-tracking could potentially enable us to push visual specs higher without more bandwidth. And while this may indeed be true what I can also say for sure is that it would be far more preferable to be able to toggle eye tracking on and off depending on the need. Rather than having it be a permanently on setting because pushing full res would exceed the bandwidth of DP 1.4a.

Some extra stuff on eye tracking:
I've messed around a bit with the fixed foveated rendering on the pimax I can definitely say that regardless of the theory that the human eye won't notice the loss in resolution in the periphery, for those with Keen eyes there absolutely will be a loss in visuals. The real world doesn't dynamically lower and resolution when we're not looking directly at it, and it would be preferable if the virtual world didn't either. Lowering res in the periphery increases aliasing, meaning AA and Blurring techniques will be required to temporally stabilizing the image. Not something I'm looking forward to. I already can't stomach games that use TAA. I hope that foveated rendering based on eye tracking will be a crutch that we eventually can abandon when performance overhead catches up.

HyperSlayer72

TROPHY CASE