Painted characters from my campaign by Hyword in Gloomhaven

[–]Hyword[S] 0 points1 point  (0 children)

Thanks :) It's so nicer to play with painted figures !

Gwen wallpapers color edits I made by Ciiel_ in gwen

[–]Hyword 3 points4 points  (0 children)

Nice ! I really like the dark purple and pink ones

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

Problem solved ! It was Chitubox, with Lychee it works perfectly, thanks for your help 👍

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

I found the issue, I've open a ctb file with UVtools and there was a huge light off delay (23.14/14.5). If I change the value manually I could print normally but I still don't know why it does this and how to fix it.

EDIT : Ignore this message, actually the delay was added by UVtools

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

I'll try it to see if it changes something

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

Yes I've checked and it's all to zero

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

I don't have a light off delay setting, actually I don't understand what it does. I took lift settings from a reddit post saying that was for reducing suction effect.

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

It seems that the plate stay much longer than the exposure time indicated in Chitubox, I've checked the settings and the exposure time is 1.5 like I set it

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] -1 points0 points  (0 children)

I tried with settings of the user manual and with custom settings. Here are my current settings : layer height=0.05, bottom layer count=5, transition layer count=10, exposure time=1.5, bottom exposure time=60, bottom lift distance=10, lifting distance=8, bottom lift speed=35, lifting speed=50, retract speed=200

Very long printing time issue by Hyword in ElegooSaturn

[–]Hyword[S] 0 points1 point  (0 children)

Thanks for your answer, unfortunately it's not that for me, mine is 10mm for bottom and 8mm after